Counting matching models…
Reversible cupholder insert for slim RedBull sized cans while keeping the slot available for normal sized drinks too! Have not seen this style before so decided to make my own. Designed for a Tacoma, but will fit other cupholders with…
You can now print it on the sloped, upper side to get a much better look! I could reduce the print time and used material by using the shell-command. If you use the textured PEI-sheet, you might get a nice finish on the upper side. So I…
I designed this hook to hang bags on our Mountain Buggy Duet stroller. This is a version with gyroscopic cupholder. To assemble it you need 4 M2.5 screws with nuts and to secure them I use Loctite glue. Hook_with_holder should be printed…
I designed this adaptor for the cupholder in my 2018 F150 to hold either my 14oz Yeti Rambler or 32oz Nalgene bottle to keep them from sliding around the truck. Should fit 2015-2020 Ford F150's and also confirmed to fit in the 2021 Ram…
iPhone Stand Dock for Cupholder BMW F30 F31 F20 and many more I designed it to fit an Apple iPhone 8 in my BMW F31 cupholder. //UPDATE: Works great with the new iPhone 13, older Models as well. Hi there, I designed something special for…
This is a commissioned model designed for my wife. She likes to grab her coffee cup and hit the door when taking the kids to school, but her car isn't equipped to hold the typical ceramic coffee cup, or her water bottle, or her phone, or…
I scaled the original model to 62% and added a base to the bottom to fit in most vehicles cup holders. Just want to add on that I'm not an original designer, this similar design has been in my local area however I could not find a file…
This is a drink holder for the Citroen Jumper, Fiat Ducato & Peugeot Boxer. The print area should be sufficient for most printers. (Diagonal printing) Function: 2 - cup holder 2 - pen holders 1 - Tray for keys or mobile phone Important:…
Fits into the newer ashtray railsystem (after 96, i think.) modified some parts for better printing in PETg on Prusa MK3S: cupstand arms were strengthened because they broke easily on low res prints the front panel was split into 2 pieces…
I added a 29mm cigarette lighter hole and a bmw logo on top of Fix3D:s model. You should probably use the original model's slicer settings. I used mostly default settings and the print could have come out better:) The bottoms of the holes…
As you can see in the pictures, this is a two part design. You will need to print the mounting clip and the actual cupholder. The clip is mounted in the passenger footwell by removing the forward screw on the center console near where the…
I made a nice bottle holder for the Thule Chariot. This one is made for 75mm bottles/cups but if a bigger is needed its easy to just adapt the size. The two parts i but together with threaded inserts for god strength and ease of printing.…
Cupholder für den Einbau beim Ducato oder Jumper anstatt des Tablet-Halters. Für alle Pössl bzw. Kastenwagen oder Wohnmobile auf Ducato bzw. Jumper-Basis. Durchmesser Cupholder: 85mm Durchmesser Reduzierstück: 70mm Durchmesser…
Install instructions and the original launch video here:
PRINT AT 2540%. TREE SUPPORTS MAY BE USED. AFIXES UNDER DESK WITH 3 SCREWS V1 doesnt have the screw holes for mounting with tape or other uses.
Moin. Die Dosenhalter im Ford Transit MK7 sind so gebaut, dass alle Dosen immer rausgefallen sind. Daher habe ich diesen Halter so gezeichnet, dass er höher ist und somit auch längere schmale Dosen stabil und sicher stehen. Es passen 500…
If you are the kind of person who rides around with a Motorola APX series portable radio flopping around in your cupholder, this model is for you. This will work with APX6000/7000/8000. It will likely not work with other APX radios that…
Wanna get the commercial license? Have a look at my printables club. I didn't like the original cupholder for my e-class so I made my own. The original holds just the cups, but I wanted it to be also my phone holder. I also had a little…
A simple adapter to fit a standard sized Hydroflask in the Tesla Model 3 cupholder. A clearance cut ensures it won't interfere with the other cupholder. The base is hollow allowing for extra storage while reducing material usage. Edges…
This is a design for a cupholder extender to fit large bottles that don't fit in the normal model y cup holders. This one is specifically designed to fit 2021 model Y cupholders, and a 36oz yeti bottle. I designed it to be printed on an…
Cupholder for simracing rig. Holes for M8 screws. Inspired by https://www.thingiverse.com/thing:4888859 but optimized for 3d printing, with less overhangs - No supports needed.
This is an old version, head over to my profile for the newer, better one! So I was looking for a fitting cupholder for my BMW E90 tray and couldn't find one which wasn't too big. This one fits to your BMW E90 without the big navi and…
replacement for volkswagen golf 6 cupholder insert + R-logo
+ detect thin walls + 2/3 perimeters + 10% infill Double cupholdeer and arm rest support for the Polestar 2. Cupholders fits 330ml cans and macdonalds cups. At least here in europe :) Built so the armrest can extend over the cupholder.…
BMW E90 E91 E92 E93 Cupholder for 0.5 l PET and RedBull can
You do not need anything simple put it so the feet is looking up. Finally it took me 55 minutes at 50mm/s
It's a cupsized trashcan for the cars cupholder. Three different models, one with Trash Can, Trash Cup and one without any text cut in the top. Printed in place without any supports. Will work right of the bed. For your disposal ;-) Enjoy.
Make the centre console of your Škoda Epiq work even better for you. These 3D-printable Cupholder Inserts are designed to make smarter use of the available space around the cupholders. Different insert options help you adapt the centre…
I've printed this Model with PETG 100% Infill organic support to mount the knob you'll need 2x M3 screws. to mount the lid you can take a Nail (3mm diameter) and cut it to 40mm lenght. for better fit, you can drill the holes to 3mm. i…
I designed this cupholder for a VW T4 Transporter , maybe it also works for other models (NOT TESTED!!!) Tips & Tricks: To print this cupholder: It is needed to use SUPPORT!!! I doing my best to make the model printable. Material: 2x…
I merged the cupholder adapter from DutchWorkX3D with the shift cup sleeve from johnsmithbb168 for it to fit perfectly in my Tesla Model 3 without any other insert into the cupholder bay required. This will fit the unmodified shifter from…
Is your hot tub area, deck, gazebo, or cabana missing a place to set down your drink? Each cup on this stately double cupholder is 80mm wide at the base and flares to 100mm wide to accommodate cans, bottles, shaker cups, tumblers, vacuum…
Insert for Tesla Model 3 center console cup holder to hold a 32 oz. Nalgene bottle. The model is slightly tapered from the bottom to the top to fit snugly inside the cup holder and the Nalgene bottle is a snug (but not tight) fit. The…
So you bought a brand new electric vehicle, but something feels missing? Worry no more, as this model brings the satisfying experience of a manual shifter back in your car. Printed without supports, this model fits into your car cupholder…
This adapter will keep your Hydroflask from flying around the car. Simple print. Fits snugly around a 32 oz Hydroflask. Model files are provided in case you want to modify to fit a custom bottle. Parametric Design.
Cupholders for e46 with space for usb charger. Small holes on sides are for ambient lights smd led can be inserted. Perfectly fits Koch 500ml bottle. Version 1.0. If u use it please tag me at IG: tomas_lukacs thanks. NOT FOR COMERCIAL USE.
A 3D printed clamp by AmptUp.org, that fits a standard Medline wheelchair and can also be clamped to most pipes for wheelchairs, strollers and walkers, vertically between 1/2in. to 1 1/4in. in diameter. It has a dovetail receptor for…
For all the other the basic moms that have a giant Stanley quencher and a Mockingbird stroller … I dinged my Stanley quencher because it did not fit well in my Mockingbird stroller, so here is gravity holder that will hold that humongous…
I wanted a really sturdy cup holder that can be clamped on to a table. I've seen commercial versions of the springy kind I remixed and all the reviews are complaints about how they aren't strong enough. I also wanted one that was fully…
Small remix of rear seat cupholders for 2015-2020 GMC Yukon/Chevrolet Tahoe, I added a GMC, Denali, and logo-less version. Enjoy! (Better pictures coming soon) Print Settings: eSun Black PLA+ filament 210/65 C 0.20 mm layer height Leave a…
Zero Gravity chair cup holder trays to slide over the frame. Made a few variations, pick which one suites you best or use the blank F3D file to “roll your own” (make sure to link the original if uploading as a new model please). Model…
SeaDoo Spark Cupholder Who would think a jet ski wouldn't come with a cupholder?! Well look no further, this is the perfect cupholder for your Sea Doo Spark! Fits any year Spark 2UP or 3UP (Trixx included) Holds both slim cans and…
ND Miata phone mount/charger that plugs into the cupholder socket. There are files for Left Hand Drive and Right Hand Drive, as well as a 17mm ball and a 15mm ball. Most phone holder accessories use a 17mm ball. I'm using this wireless…
The part works for now but I have no long-term experience with it yet. Part in action: https://www.youtube.com/shorts/ZeuzpYQkdoY Expected upcoming issues: PLA might warp in car interior the two thin “clips” that get caught by the holding…
Getränkehalter für VW Golf 2 / Cupholder for VW Golf Mk.2 / Jetta 2 Ersetzt den originalen Aschenbecher. Diesen einfach herausziehen und den zusammengebauten Getränkehalter einschieben. Stört nicht beim schalten und die 12V Buchse ist…
Nalgene or 32oz bottle holder for a vehicle. It will need adjusted to your specific car cupholder size and possibly bottle with the STEP file
Makes the normal mini-cupholder in a Skoda Yeti a more useful size. Was designed for a 2011 Yeti. Also includes a version for holding 600ml milk cartons. :D
Design is a cupholder for my R5 e-etech. I made it in two pieces to try different holders or make another cupholder. Its inner diameter is 78mm and its depth is 115mm. I also printed a logo on it, but its position might be not the best. I…
The general shape of the base was inspired by the other C5 cupholders available throughout the internet. This has some unique features: A locking tab to prevent it from lifting out with your cup. Increased ring diameter I've shared my CAD…
Print with a 0.12 layer height.
This divider model should 3rd gen Toyota Tundra 1794, Platinum and Capstone, possibly other models, front cup holders. I printed it in TPU, oriented upside down. No supports necessary
Based off the design by Kl0ck, but remade with the official CAD geometry provided by Ford for a better fit in the mount. Also features slightly bigger openings with better angles to fit large Yeti-style tumblers. Print upside down, no…
cupholder with storage
Important! The floor of this model is tilted, adapted to the cup holder in the BMW. So maybe you need to turn it until it fits A cup holder for the BMW iX1 (U11) I tested this only for my U11 iX1 and can not 100% confirm that it fits for…
This is a reupload and thought it'd be awesome to have this on Printables. Since the existing cupholders doesn't fit anything in this world, I decided to make one that fits normal 33ml cans. The small square hole in the middle is for…
Made for my 100 series landcruiser manual edition. Didn't like the look of the ones you could buy so I made my own. Thought I would share so others can use and not need to buy.
This is remix of the low profile cupholder done by RedBaron97. I added a 3M cable grabber onto the flat section I added between the cupholder holes so I could route a cable for charging an android tablet / phone on the road. I printed…
I printed with black CR-PLA on Ender 3 PRO. 0.4 mm nozzle, 0.2 mm layer height. 3 wall lines, 5 top and bottom layers, no brim/raft, support only for inside. BASIC ASSEMBLY: Put lid on ashtray aligning the hindge and place the pin through…
Print with ABS/ASA/PETG for hot-car resistance. The fit is about half a millimeter undersized. Cup-diameter set to 70mm
Going for a walk with the kid(s) is nice. Being able to bring your morningcoffe or tee with you, priceless! The cupholder is designed in two pieces: The holder - clips in place and secures itself on the frame with a hook on the existing…
My wife likes to bring her Nalgene water bottle on trips and the cup holders aren't big enough to fit. I designed this to follow the angle of the front cup holders for a pleasing fit.
This cupholder design solves the issues with the horrible cupholders in the first gen Mini Coopers. These have inserts to hold everything from big handled travel mugs all the way down to a skinny red bull can. Having used the original…
An adjustable cupholder designed for ultimate convenience—simply print it and securely clamp it onto any surface using its adjustable screw clamp. Perfect for desks, tables, or other flat surfaces, its versatile design ensures a snug fit…
I had an empty box in my car and needed Cup Holders. Print the parts and glue together You might need to remove the rubber in the bottom. This is for the pre face lift model of Volvo P1 2004-2007 Update 1: Fixed an issue with too thin…
This is a 3D model of a trash can made specifically for Suzuki Vitara 2015 onwards models. It perfectly fits into any of the two existing cupholders in the centre console. It has a hinge that connects with a piece of 1,75mm standard…
We wanted to add a cupholder to our baby stroller which fits all sorts of cups and baby bottles. The cupholder is mounted on the left and/or right inside of the handle. There is by default a mount (knob) there. Cupholder fits Philips…
Rear cupholder adapter for 2021+ F150 for mounting fixtures, rear screens, etc. Worked well with a custom arm and a switch mount for a cross-country trip. Designed for M4x10x6 heatset inserts inserts 50mm apart.
I created this part because my cup holder separator failed on my 2003 Camry, mainly because of a small piece of plastic breaking out of the mounting hole that the tabs for the separator slip into. This part has longer pivot tabs than the…
Cupholder for Britax Smile 3. Probably works with other strollers with a “button style” mount. Made to fit a Hydro Flask ~75mm and slim sodacan ~58mm with adapter ring. Easy print with supports.
Mein Dosenhalter (0,33l) für BMW F-Modelle. Ich nutze den Cupholder in meinem F87 M2, die Energydrink Dosen wackeln nicht mehr hin und her :) Druckt am besten in PETG aufgrund der Hitze die im Sommer im Auto entstehen kann. 0,25l-Variante…
simple cupholder for your Mazda mx5, allowing you to have your beverage out of the way of the gear stick whilst keeping it well within reach! this simple design allows you to use the existing passenger side centre console screw (and cap)…
A basic cupholder that I made up for my Nissan Patrol Y61 / GU. STL and gcode file attached. I printed in grey PLA and it went ok, but the bottom seemed to shrink and look funny on mine - but you cant see anyway once it is installed. Fix…
I needed a cupholder in my new (old, used…) Wingamm Ibis 500 based on a VW T4 and couldn't find one I really liked and so I made an own one. My T4 is 1998 but should fit on other construction years as well. It replaces the original front…
Use PETG or other materials that likes heat better than PLA, PLA tends to warp when the car is in the sun. Use 100% infill and supports on buildplate for the adapter.
Should work for a left hand drive 2015-2020 Fit This is 6mm thick, which is probably way overkill. I imagine you could change to 3mm, and pick 4 outer walls in your slicer. That would give you 8 walls total and a very strong part. I…
The readymade .stl is made for a Skoda Fabia 3 (and probably fits other cars for the Volkswagen Group), but you can modify the dimensions in Fusion 360. Since I think most people use a case on their phone, it's designed with this in mind.…
In case you broke your original. Print in ASA or CF Nylon for high heat enviroments
Bottle holder and accessories for stroller or bike. can be mounted on frames from 13mm up to 33mm. MATERIAL: 1 x 5mm X 40mm screw, 1 x 5mm bolt Infill:60% with PLA, without support. easy print
The system contains two cupholders: The Beast - named after its monstrous appearance, works with a gravity-triggered locking mechanism and lets you hold most sizes of beverage containers (from a very small coffee cup to a large pint of…
Same as the original, just reversed with the big hole towards the shifter.
A cupholder compatible with the square arm Lovesac couches. It has about 2mm leeway on the arms to allow for printing error without making it a loss and it doesn't hurt the functionality. Added in my new design which uses less material…
Printed Modular Tray & Organizer! It’s made up of three parts you can assemble in different ways, left or right-handed totally customizable to fit your needs. Has a removable pocket that’s perfect for holding books, phones, pens, or…
Beer Stein, Scale as needed. Currently in inches. Soda can fits inside.
Simple cupholder designed to fit car door pocket but probably can be used also in many different ways. I attach freecad file - diameter and pattern density can be easily modified with parameters.
2005 Toyota Highlander front cup holder spacer. This was made to replace the broken spacer in my 2005 Toyota Highlander so that two cups can be placed. Prints without supports
Cupholder designed in Tinkercad to attach to frame of IKEA Kura bed. Hex design comes out nicely, but I did fail once without supports, so the pictured print was done with supports everywhere on the hex design. This is one of my first…
Description 2023-2024 Subaru Ascents have 19 cupholders. All of them are too small for my 40oz Thermoflask container as well as most soda fountain cups here in the United States. The cupholders between the driver and passenger seats have…
This is a magnetic smartphone holder designed remixing this thingiverse simple base plug for the Fiat 124 spider / Mazda Mx-5 cupholder slot https://www.thingiverse.com/thing:2108802 . It is intended to be printed in a heat-resistant…
I already sold the car, so I can't upload any real photo. Feedback is welcome.
Adapting the cupholder in a Vauxhall Corsa C to fit larger travel mugs.
Believe it or not..: The Renault Espace (2018) top model comes without a cupholder.! Here you have a cupholder for mounting in the middle console compartment. It has a little coinbox as well. It's a snug fit, but when pushed into place it…
This is a larger cupholder for a Generation 3 Prius. The diameter is about 1cm wider compared to the original part. Printed in PETG at 0.20mm, 20% infill, no supports, 3 perimeters. Coated with resin for easy cleaning.
Jeep Grand Cherokee's often have a small issue with the material around the cup holder. This trim is coated in chrome and becomes very sharp when it peels; damaging or at least marking whatever is placed in the cup holder.…
It annoyed me that I could not fit my water bottle into the cupholder on my honda element. I opted to make a new one. This replaces the existing center console cupholder. As it is deeper, you must assemble it in place. I printed…
1. Print it and then use super glue to connect them. 2. Use double adhesive tape to mount it in place.
Mein Dosenhalter (0,25l) für BMW F-Modelle. Ich nutze den Cupholder in meinem F87 M2, die Energydrink Dosen wackeln nicht mehr hin und her :) Druckt am besten in PETG aufgrund der Hitze die im Sommer im Auto entstehen kann. 0,33l-Variante…
A replacement for the cupholder inserts for 2009-2014 F150s that always seem to go missing. Print in PETG or something heat resistant so they don't melt in the sun. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No…
Since I faced too many problems with my mug, I'd design a mug holder to screw under my desk. Works for Cups and Bottles up to 85mm diameter. Since I changed my desk, I also made a remixed vertically mounted version , which is just a…
Wife uses a 40oz Stanley cup that is very top heavy and moves around way too much in the car. The stock GX cupholder is an ellipse shape that relies on 3 spring loaded detents to keep drinks stable. Those detents work well for light…
![Cupholder Phonestand [parametric, Skoda Fabia 3]](https://media.printables.com/media/prints/746534/images/5831109_8b5f4ca7-795f-41fb-bb6a-34c044498377_950b57a2-b0ba-4a87-9f7a-c5ccb1fcd9cb/20240201_142722_1706794125338.jpg)
