Counting matching models…
To prevent jumper wires with the ubiquitous 0.1" DuPont connectors from inadvertently being pulled out. Fast and simple to print, for 1 to 8 connections, in both standard lengths. Print at 0.2 mm layer height, without supports or brims,…
Print approx. €0.37–€0.45 excl. taxPreliminary estimate for one variant
This is designed to hold an ESP32 with pin headers soldered on and allow you to use dupont connectors with it. As the filenames imply, this was built with the ESP32-WROOM-32D in mind, specifically the one from HiLetGo. The main components…
They are super easy to clip on and remove from the spring-loaded sliders inside the CFS lid. One is with SUNLU written on the top, other one without text. EDIT: Because of someone commenting 5mm is better than 6mm I added a 5mm version.…
Printable 40 pin connector for RaspberryPi. You just insert separate cables (goldpin connectors) inside, put locking bar in and voila. You made yourself a working 40 pin connector and got rid of single plug cables. Never connect to wrong…
This is a housing for male inline 2-row Dupont connectors (aka 0.1" / 2.54mm pin headers). It is intended to hold and protect the male side and provide keying to avoid connection in the flipped orientation. There are 2 parts; the housing…
Resizeable Jumper Wire Holder, flat heavy base for work benches. ( Not 100% sure the modifier will work outside of bambu/orca slicer )
Basically just needed a shorter version of this. Having used the original 40 way design a couple of times (it works fantastically), I needed to hook up a waveshare 35a display. Turns out the plug body is perfectly fine for holding pins as…
The story of this design is that I needed to replace some Uponor Valve, so I begrudgingly bought this black plastic part for a shocking amount of money only to find out that it did not fit my model after all. I'm not all too mad about the…
The intent of this design is to enable the “side by side” display of a large collection of Dupont cables, while still trying to keep things as compact as possible. The print consists of a stand with ten “frames” which can pivot on the…
They are super easy to clip on and remove from the spring-loaded sliders inside the CFS lid. One is with SUNLU written on the top, other one without text. EDIT: Because of someone commenting 5mm is better than 6mm I added a 5mm version.…
Connecteur 5 fils pour fils câble Dupont, je ne l'ai pas testé, si cela ne marche pas, merci de me le dire en commentaire
Connecteur 6 fils pour fils câble Dupont, je ne l'ai pas testé, si cela ne marche pas, merci de me le dire en commentaire
Connecteur 3 fils pour fils câble Dupont, je ne l'ai pas testé, si cela ne marche pas, merci de me le dire en commentaire
Connecteur 2 fils pour fils câble Dupont, je ne l'ai pas testé, si cela ne marche pas, merci de me le dire en commentaire
USB to Dupont connector adapter. Install DuPont connectors carefully from the back end then to the front with the DuPont retainer clip openings face down.
3D printable topographic miniature of Washington D.C., Dupont Circle - 🇺🇸 United States Capture the beauty of Washington D.C., Dupont Circle 's city landscape with this topographic miniature! This 3D model represents the geographic area…
Un coupon per regalare 1 stampa gratis. ci sono 2 versioni una con i buchi e l'altra senza.. quella con i buchi è più semplice da rompere per confermare l'utilizzo del coupon
I asked her what she wanted for Christmas and she said for me to take out the trash and recycling once a week, so I printed 52 of these coupons. Each one says: DOMESTIC SERVICES AUTHORITY OFFICIAL SANCTIONED VOUCHER for Trash+Recycling…
This is an overbuilt jumper wire holder that seeks to contain the mess. All other solutions I was seeing were Gridfinity, but I really wanted a vertical solution. The wires stay put very well and don't jump out, and it's very easy to…
K dispozici jsou 2 varianty spodku na 150 a 80mm kablíky. Zalisujete tam 4ks M3 matice a pro spojení s hřebenem (originál od autora) použijete M3x10 Doporučení pro tisk je 3 layer wall, infill 35%, no brim.
Jumper Wire Holder & Organizer Clip for Honeycomb Storage Wall (HSW) Precision-designed snap-in U-clip for clean, tool-free wire management on standard HSW panels. Snap-fit design with flexible retention lip Holds dupont/jumper wire…
When prototyping electronic creations it's easy to use pre-made modules from AliExpress or other suppliers and to wire them to the microcontroller using 30AWG with Dupont connectors to slide over the pins on the microprocessors and…
I don't charge for my functional models. Please consider purchasing some of my paid models as a way to support both my work, and this great website: https://www.printables.com/@ninjamida/store NOTE: An issue has been identified with the…
Dupont Connector Mounting Inserts Tired of loose Dupont connectors or messy wiring harnesses? This model provides a secure, snap-in mounting solution for standard 2.54mm Dupont connectors, transforming them into a clean,…
Find out everything you need to know about the connector on my blog: https://nerd-corner.com/3d-printed-dupont-connector-for-jumper-cable/
Simple way to hang your dupont crimping tool. Should work with most as long as you hang the tool upside down. Feel free to tinker: https://www.tinkercad.com/things/f3ktpdrg2DT-dupont-crimping-tool-multiboard-holder Print instructions…
The quick wiring attachment plate by @Printoptiontwo enriches the usability of the MiniSkidi from ProfessorBoots by enabling the quick swap of different, wired attachments. As it is, the Dupont connector used for connecting attachments…
I propose you a deal of 50% profit STL 3d printing models Hello my friend, I'm celebrating, because I'm going to start a treatment that I need for a long time, a health issue, and therefore I need a lot of support to collect the money, so…
Dupont Cable Management. The fins need to be separated after printing. If you optimize this design please tag me. I would love to see improvements.
minimalist wallet resembling a ficsit coupon, requires two elastic hair ties
Fully customisable Gridfinity trays to store your (Dupont) cables. I have been using urish 's Dupont Cable Organizer Customizable for many years now and they are an excellent way to store my breadboard cables. Now, I am switching to…
The Dupont Wire Organizer System was created to assist fellow Arduino, raspberry pie, robotics and rc enthusiasts stay better organized. My cables were always tossed into bins and they were a pain to take out, so i created these bins so…
A stackable box compatible with https://www.printables.com/model/57580-stackable-boxes , which adds an integrated holder for dupont connector wires. Prints without supports or any other special settings.
A typical 2-row 2.54mm ribbon-cable connector is female. That is, the part on the cable has holes, the part on the PCB has pins. I needed a special application where where the part on the cable has the pins. Those are rare to get. However…
Find out everything you need to know about the connector on my blog: https://nerd-corner.com/3d-printed-dupont-connector-for-jumper-cable/
The intent of this design is to enable the “side by side” display of a large collection of Dupont cables, while still trying to keep things as compact as possible. The print consists of a stand with ten “frames” which can pivot on the…
the heads often fuze and damage cables so i got rid of them
I know I can't be the only person experiencing frustration at fiddling with the Coupons every time I want to take the large cards out, or put them back in the insert, since both components share the same slot in the cards tray.…
Gridfinity Dupont Cable Box with Locking Mechanism This custom-designed Gridfinity box is ideal for organizing Dupont cables. Available in two sizes (3x1x5 and 3x1x6), it fits seamlessly into the Gridfinity system. Features: Rotating Lock…
Some update from the original. You have 2 versions : one with print all in one but the combs/brush is quite weak one in few part with a combs/brush to mount with strong. (You can reduce the size to 99% to be easier to mount on the base)…
a coupon if u don't know what to get for a friend for a birthday/christmas present
a coupon to give as a gift if u don't know what to get a friend for their bday
This is a remix of the original Dupont Holder design . I wanted a way to keep my Dupont terminals organized, especially since they were just hanging around. After testing a few ideas, I decided to keep three connectors side by side for…
Gift card with extra space to insert money. Simple as that. Print instructions 0,2mm layer height, 15%infill Top, bottom infill hilbert curve (main photo as an example)
Thermistor had a dupont wire but board had a XH2.54 port. This piece is a converter to use the crimp connector from a dupont connector in an XH2.54 shell. Might be material stuck in the hole & tolerances are quite tight. Printed with 0.15…
This tool matches the size of Uponor Valves 1005103 and 1046632
ENG: Hello, I created a discount coupon for our customers :D The idea behind this coupon is full editing in Bambu Studio, fast printing and low cost. I have a lot of regular customers for whom I wanted to make cooperation with me more…
The project involves using an ESP32 to collect real-time energy usage data from a Kamstrup power energy meter’s HAN inte
Add your own text to have a fun coupon to print out. Blank base for you to get started
Hi Internet Sim Modders, This is a no frills, super quick and simple Dupont Male header to PC Fan adaptor. I've only added the 2 pin version for the +12VDC supply to a standard 3 pin PC Fan connector. It's intended for those dupont male /…
Material test array coupon for xTool laser engravers. Setup for Engraving: Print, set the coupon below the positioning laser on your machine, and position the coupon so that each leg of the positioning laser touches each of the marks in…
Another photo caddy insert this time for the card game Once Upon a Time. This is part of my effort to standardize all my small games into uniform boxes for easier storage using the Boardgame Barrio photo caddy jacket system…
Back part: fully printed with orange plastic Front part: (optional) Print first layer (0.16 mm) with transparent plastic (add pauze in slicer and swap plastic when print pauses) Print remaining model with orange plastic Glue parts…
Spice up your relationship with these fun and flirty Naughty Coupons! This set includes more than 25 unique coupons, each offering a playful or romantic reward to redeem with your partner. Perfect for anniversaries, Valentine's Day, or…
I found the original model and printed them to try with my Pimoroni Picade Max Aracde. When connecting them to a horizontal connector the sleeve would not allow the pins to fully connect. I also noticed that when connecting sleeves to…
An ESP8266/NodeMCU enclosure incl a JST connector for a LED strip, a barrel connector for DC power and 4 dupont connectors. Used this for the other part of the dupont connector:…
This is a quick-to-print gift idea for someone you know whom you're willing to print something cool for but don't know what to print yet. Category: 3D Printers
Modifications for usability, see differences listed below
Update Feb 17 2025 Moved the original files with a 0.1mm tolerance to their own folder Uploaded new files with a 0.2mm tolerance Dupont connectors are 2.54mm Openings are 2.74mm Added Configurations 1x3 with filled-in center pin (useful…
cable opening can be reduced
dupont contact holder for generic crimp tool. I printed with 0.4nozzle, 0.2 layer h. the screw will need to come from the other side, but it still works and makes crimping quick and easy Ideally the pin slot should be pretty tight. if…
Easy way to transform your Dupont cables for JST XH 2.54mm sockets. Print in PLA or PETG. No support needed. Freecad file is included.
ST Dupont lighter stand or display purposes. Can be nice to have the collection presented on the same displays. The lighter displayed is a Ligne1 Full size, so should fit most models. (There is one without branding for when you got other…
Overview This is a fully customizable contact jig designed for DuPont-style connectors, perfect for hobbyists, makers, and electronics enthusiasts. Whether you need a 1x6, 2x8, or any other pin layout, this jig adapts to your project with…
https://youtu.be/prxj5KZd2pQ These are connectors for connecting servo plugs to Dupont cables, see video and images.
In electronic setups sometimes different connectors are required. This little tool may help to make this more comfortable. I used these little Breadboards and these banana female connectors . The Dupont female header has 7 (!) pins. Two…
Like my mini crimper but takes advantage of the way 3D printers print in layers to make a much stronger crimper. This should help you crimp those small Dupont crimps so common in our hobby. The Guillotine style allows you to use one hand…
This is for those tiny crimp on dupont connectors that fit inside the plugs that plug into the RAMPS board. Tolerances on this are TIGHT! don't feel bad if you can't print a working one. This isn't going to crush the connector tight but…
As a gift for a friend I designed this coupon for a ticket to the GOP Variete Theater in Essen, Germany. There is a normal version and a smooth version - Both comes with files pre-painted in Bambu Studio.
Hamster Speed Tester Description: Have you ever wondered how fast a hamster can run? Or how many times a day it completes a lap around its wheel? Let’s try to find out! Counter Features: Can be connected to any hamster wheel Displays the…
Connector housing, Dupont 10Pin 12mm Find out everything you need to know about the connector on my blog: https://nerd-corner.com/3d-printed-dupont-connector-for-jumper-cable/ or https://nerd-corner.com/dupont-connector-v1-1/
14mm Dupont version Find out everything you need to know about the connector on my blog: https://nerd-corner.com/dupont-connector-v1-1/ or https://nerd-corner.com/3d-printed-dupont-connector-for-jumper-cable/
Connector housing Dupont 4Pin 12mm Find out everything you need to know about the connector on my blog: https://nerd-corner.com/3d-printed-dupont-connector-for-jumper-cable/ or https://nerd-corner.com/dupont-connector-v1-1/
14mm Dupont version Find out everything you need to know about the connector on my blog: https://nerd-corner.com/dupont-connector-v1-1/ or https://nerd-corner.com/3d-printed-dupont-connector-for-jumper-cable/
Connector housing, Dupont 2Pin Find out everything you need to know about the connector on my blog: https://nerd-corner.com/3d-printed-dupont-connector-for-jumper-cable/
Find out everything you need to know about the connector on my blog: https://nerd-corner.com/3d-printed-dupont-connector-for-jumper-cable/ https://nerd-corner.com/dupont-connector-v1-1/
14mm Dupont version Find out everything you need to know about the connector on my blog: https://nerd-corner.com/dupont-connector-v1-1/ or https://nerd-corner.com/3d-printed-dupont-connector-for-jumper-cable/
Remixed - The model has two small notches on each side, large enough for the DuPont connector to be firmly inserted between each battery pole and the model. The cable may be a little tight and require a little force to insert, but this…
This is a way to fit Dupont refill inside a Pilot G2 pen. It's a well known hack on the web adapted to 3D print. Cela permet de monter une cartouche Dupont dans un stylo pilot G2. C'est une modification très connue sur le web, adaptée à…
Find out everything you need to know about the connector on my blog: https://nerd-corner.com/3d-printed-dupont-connector-for-jumper-cable/ https://nerd-corner.com/dupont-connector-v1-1/
I wanted a way to keep my DuPont wires together and organized but wasn't a big fan of the big clunky comb-style organizers. So I made my own! This organizer can hold about 20 to 22 wires at a time. The wires I have are about 195mm long…
14mm Dupont version Find out everything you need to know about the connector on my blog: https://nerd-corner.com/dupont-connector-v1-1/ or https://nerd-corner.com/3d-printed-dupont-connector-for-jumper-cable/
Coupon for a free D print with tear-off part in 3 diff. fonts My own design inspierd from others here on printables.com
I printed this on my MK3S+ using .4mm nozzle-X with PLA. I recommend using .1 or .2 detail printing for the clip system to work cleanly and having a good quality finish for the cable holder. Current cable length configured on the side…
I like the changes Funkenjaeger made to the gridfinity DuPont jumper wire holder, but I also like the Gridfinity Ultra Light Bins by HuMa. This combines both.
NOTE: Do not print with supports Print settings (example) Rafts: No Supports: No Layer height: 0.2 mm Infill: 100 %
I've had alot of wires stached in my “wire box” and often had issues fithing the spaghetti monster they were creating. After a short time in Tinkercad, I came up with this simple design. It can be printed in just under 2 hours. So far,…
Printed in PLA, PETG will be better using layer height 0.2 with a 30% infill. The inside connectors are just standard female dupont jumper wires. Before sliding them in add a tiny drop of super glue then push them. Tip: If you dont know…
Connecteur 5 fils pour fils câble Dupont, je ne l'ai pas testé, si cela ne marche pas, merci de me le dire en commentaire
