P
PrintablesPrintedForFun
Walksnail Goggle X shim with upwards tilt
Ideally printed in PLA and moulded to the casing (heating the part with a blow dryer before). Mirror part to suitable for both sides of the headset.
- Downloads
- 238
- Likes
- 14
- Rating
- 0
Search results: upward
Counting matching models…
P
PrintablesDanol
HP Reverb G2 upwards cable clip
2021-01-02: Added V2 with a larger ring for the cable – I was afraid the cable could get damaged by bending. Cable clip for HP Reverb G2, directing the cable upwards – useful for pulley systems TO BE USED TOGETHER WITH THE ORIGINAL SIDE…
- Downloads
- 164
- Likes
- 24
- Rating
- 5
P
PrintablesRoyal198
Upward Stream Deck XL 10° stand
I could not find Stream Deck XL stand that would fit my needs. This is very, very simple solution for me to align it with my keyboard at desired angle. It is 10° angle towards me to get a less glare and have better visibility to my…
- Downloads
- 136
- Likes
- 15
- Rating
- 0
P
PrintablesTheOkayDaniel
S1 upwards exhaust narrow 100mm
Narrow exhaust enabling the xtool S1 to get 6cm close to the wall (limiting factor being the power supply wires etc.) Printed in PLA with support with 0.20 standard quality (bambulab). The upper screws can be a bit hard to get to, but not…
- Downloads
- 108
- Likes
- 10
- Rating
- 0
P
PrintablesNinja3dPrinting
Snap Walls- Building upwards and onwards
Seeing the Snaps walls that were in the winners pool for a contest i noted the creator listed some possible improvements, Mainly vertical stacking and floors. While i've modified (In tinkercad, accuracy is ,,, suspect) the walls i've yet…
- Downloads
- 101
- Likes
- 27
- Rating
- 0
P
PrintablesTardif Online
X-Axis Cable Holder Upwards MK4 / MK4S
I design this cable holder for the X-axis motor cable on the the MK4(S) with a full 180 degrees return upwards, for a smaller footprint. In my process to make the whole bed fit in my enclosure project. This way, le cable is hold in place…
- Downloads
- 93
- Likes
- 28
- Rating
- 4
P
Printablesjoshua Bentley
Elegoo Neptune 2s Psu Fan Air Duct Diverted Upwards
I have two Elegoo Neptune 2s side by side and needed to redirect the draft from the psu from one on the left away from the one on the right and back wasn't an option either so i made this one. Prints easily with organic supports to hold…
- Downloads
- 65
- Likes
- 9
- Rating
- 5
P
PrintablesJohn Silvia
Sunlu S1 - Upward Filament Guide and Humidity Sensor
The original design which screws into the existing mount points is an excellent idea and solves two problems at once. It doesn't put too much strain on the filament guide and it strongly supports the humidity sensor. I have the drybox…
- Downloads
- 51
- Likes
- 8
- Rating
- 0
P
Printablestitusou
Prusa Core One 90deg upward exhaust adapter
This adapter redirect Prusa Core One's exhaust 90deg upward, connecting to 100mm inner-diameter hose. The hose connection point is leveled with top panel of Core One, for ease of connecting/disconnecting from the front. Install It…
- Downloads
- 49
- Likes
- 10
- Rating
- 0
P
PrintablesPc Team
Dyson V8 Wall Mount Upwards
This is a simple and sturdy wall mount bracket for Dyson V7 and V8 cordless vacuum cleaners. Unlike the original docking station, this design holds the vacuum facing slightly upwards, so dust and debris cannot accidentally spill out of…
- Downloads
- 27
- Likes
- 3
- Rating
- 0
P
Printablesmeltdown
Sunlu Hygrometer Mount Upward / Downward Filament Guide - OpenSCAD
Only support the overhanging areas. Do not support the filament hole. I used painted on supports in PrusaSlicer. Changes: October 15, 2023: Added brace to support frame per @AbelPaz_1246682. It should help with stability. October 16,…
- Downloads
- 27
- Likes
- 0
- Rating
- 0
P
Printablesxtommy
Ikea Skadis clip - upwards opening
The original clip isn't tight/strong enough to hold thin paper (photos), so I flipped it make gravity help with holding them. I printed using PLA, 0.2 layer height, and 100% infill. No supports needed.
- Downloads
- 26
- Likes
- 5
- Rating
- 0
P
PrintablesPearlGrey
DeWalt vacuum DCV517 back/upwards vents
Didn't like how my DeWalt DCV517 blew out the sides, so made a thing to redirect the venting upward and backward Print as oriented. Use tree supports.
- Downloads
- 22
- Likes
- 7
- Rating
- 5
P
PrintablesAlex
Desk Speaker Mount for Bose Model 161 Speakers and others - 16° Upward Tilt
This is a remixed version of the Bose 161 speaker desk mount. I've made two key modifications to improve its functionality: 1. **Increased Stability:** The base has been elongated to provide a larger footprint, significantly improving the…
- Downloads
- 16
- Likes
- 1
- Rating
- 0
P
Printableslochej
Sovol SH01 mini upwards PTFE guide
A first version of a remix of the downward facing PTFE guide. A small filament PTFE guide to clip onto a Sovol SH01 filament dryer. The filament outlet is facing upward like Creality Space PI dryer or other boxes. Like the original…
- Downloads
- 11
- Likes
- 1
- Rating
- 0
P
PrintablesBartfast
Sodastream lid holder for upward opening cabinets
The hoder is just tight enough to hold lids in place even in upright position. Small filament usage, doesn't need supports. I recomend PETG, but PLA may also work, but not tested. Just put some double sided tape on back and you are good…
- Downloads
- 11
- Likes
- 4
- Rating
- 0
P
Printablesthall72
Lego Compatible (32306-f3.dat) Technic Wheel Holder 9 x 3 (Open and Bent Upwards 14 degrees)
This model is compatible with the lego system.
- Downloads
- 9
- Likes
- 4
- Rating
- 0
P
PrintablesTM Studios
Echo Show Enclosure - Angled Upwards
Modified the original design so that the screen is angled about 20 degrees upwards so that I had a better viewing angle while sitting at my desk. The bottom layer is a little thin but it still works without issue.
- Downloads
- 6
- Likes
- 6
- Rating
- 0
P
Printablesxro
Upwards Stand for Ubigbuy 420W GaN USB-C Charger
easy to print raises charging cube to provide space for cable allow cube to access usb-ports from top
- Downloads
- 3
- Likes
- 1
- Rating
- 0
P
PrintablesDoug Joseph (design8studio)
Harbor Freight 2HP Dust Collector outlet port with downward curve (or flip it for upward curve) v1.0
This can be helpful in converting your Harbor Freight 2HP Dust Collector from a 1-stage to a 2-stage unit, which is what I did by way of adding a * Super Dust Deputy 4/5 . If you're limited on ceiling height like I was in my basement,…
- Likes
- 6
- Rating
- 0
P
Printables
SAMSUNG SSD T7 MAGSAFE HOLDER FOR IPHONE / ADAPTER / USB-C (IPHONE 15 UPWARDS)
Follow us on Instagram: https://www.instagram.com/sektor7_studios_3d Hello everyone :) Today we want to present you our SAMSUNG SSD T7 SHIELD IPHONE ADAPTER. Revolutionize your mobile experience with our innovative adapter from Sektor 7…