Counting matching models…
This is a decorative pipe flange (escutcheon plate) that fits around a water or drain pipe and conceals the larger diameter hole it goes into. It prints in two parts that fit together for a clean look. Note that the connection is not…
Print approx. €0.51–€0.63 excl. taxPreliminary estimate for one variant
This device combines two CMC Clutch handles to make it easier and uniform when working in dual tension setups for Technical Rescue Teams. We nicknamed it the keyhole. Designed using TinkerCAD
Print approx. €2.92–€3.57 excl. taxPreliminary estimate for one variant
Description Ok, “easy” might be an understatement but with minimal skill it should be perfectly doable! And otherwise it is a nifty miniature sailboat. This is a tiny tiny scale model of a traditional Dutch SeaTjalk that was very common…
Print approx. €0.38–€0.46 excl. taxPreliminary estimate for one variant
💂 Introducing the Print-in-Place Nutcracker with Movable Mouth - a festive 3D printing delight that combines the magic of the holidays with the ingenuity of modern technology! 🎁 Prints from head to feet, ready to print without…
Print approx. €1.71–€2.09 excl. taxPreliminary estimate for one variant
This is the first design I made in my single extruder - dual color series. My final design is out right now and takes this principle to a whole new level: Single Extruder - TRIPLE Color - Sleepy Cat ! And now back to the cow This is a…
Most of the simple push drill models ( mine included ) have the annoying feature that the drill bit reverses every time you pull the sliding nut back up to the top. This version solves that problem by encapsulating the sliding nut in a…
Many 3D-printed nutcrackers are bulky, rectangular, or visually utilitarian, often consuming far more filament than necessary. I wanted a compact design that looks good even when left out in a bowl of walnuts in the living room, without…
If you like my work and want to support me bringing you new content please consider supporting me on Patreon https://www.patreon.com/FotisMint All parts need supports. The parts are oriented in a way i thought is easier to print. Feel…
If you like my work and want to support me bringing you new content please consider supporting me on Patreon https://www.patreon.com/FotisMint Pre-Supported .stl and .lys files for resin included by Charro Zuck support services.
11cm x 4cm 1.5mm stamp depth solid model to print
The original design files were kindly shared by the designer / creator. This allowed me to redesign the model for printing on a much larger scale. The final design is 1.815m tall. I designed the parts to minimised weight and get around…
Give yourself a couple of nights off, break a leg. Stool is 20% scale of https://www.printables.com/model/168889-mammut-stool-ikea by hesam. Plaster cast needs to be scaled to about 97% for elves without feet.
It's been a while since I shared anything. Model building was on hold for a long time after the passing of my father, the person I learned it from when I was little. I was planning to first draw and build a typical Dutch "opduwer" but…
Timeless model of a nutcracker which is highly optimized to crack walnuts and hazelnuts. Especially hazelnuts are hard to crack - the special geometry places the nut slighty off-center below the piston which makes a perfect crack. Print…
This latest version of my push drill uses a collet chuck (rather than a 3-jaw chuck) for increased gripping force. The set of collets provided will handle diameters from 0.25" (6.35mm) down to 0.044" (1.1mm), as well as standard ¼" hex…
Hi, I have an idea to design my own gearbox. But a good one:) For now ive got 2 parts: a bearing, a one way bearing. This one is the one way bearing. Let me know if it works for you. Got 2 versions: 1 bigger than the other:) But the…
20Dec22: Corrected NutcrackerSoldierLeverPants file included (has the tab to fit into the NutcrackerSoldierLeverBelt). 19Dec22: Removed square peg Arm (old design that should not have been included), renamed round peg Arm (file name was…
Nutcracker over 24 inches tall printed on Prusa Mini+. Printed with PLA at .2 mm layer height 15% infill (I like gyroid), 2 perimeters and .4 nozzle size. No supports required (the head printed fine upside down without supports). Parts…
This is a tool to align the clutch when installing it to the flywheel. It aligns the clutchplate against the pressureplate. There is 3 different sizes of expanders to fit diffent clutches. You need 1 M8 bolt that is 120mm long and one M8…
I combined 2 ideas for a more efficient design. There is a small hole for the nuts. Crumbs can be easily removed from here. 0.4mm-0.6mm Nozzle 0.2mm layer height 15% infill (rectilinear) 3 perimeters 4 bottom layers (0.8mm) 4 top layers…
****Find all of my exclusive content on my Thangs.com profile **** It's the holiday season! The nutcracker is roughly 15 inches (38 cm) tall. Shop the filament we used in this model on our Amazon Storefront As with all of our models, this…
A fully 3D printed vertical case similar to a Velka 5.1. It's 6.6 Liters in volume with a footprint of only 185x116mm (7.25x4.5"). I've been using mine for well over a year now with zero noticeable issues. Build restrictions are similar…
parts required 2x 3/16" washer (Ø14mm and 1.2mm height) 1x M3 14mm socket head screw (leftover from the Prusa MK3S kit). Slightly longer or shorter is okay. 1x spring from unused pen optional 1x M3 washer I was inspire by FreddyZ and…
This is a remix of the Dream 3D Christmas Nutcracker statue by Dream 3D . It adds a small connector hole to the bottom of the model so that it can be used as a lid topper for the Twist Lock Trick Box . Please direct any support to the…
Intro: These are adapters to mount the Simagic P-HPR (Haptic Pedals Reactor) for the Heusinkveld Sprint Pedals . All 3 pedals (clutch, brake, accelerator) are included. Models: You will notice that there are 2 models per pedal, labeled…
🎄 Modern Nutcracker Interpretation This modern take on the classic nutcracker is Deltaprint’s contribution to this festive theme. The nutcracker is quick and easy to print, and it looks great both on its own and as a set in two sizes…
I have printed some nice keychain licence plate based on the dutch plates. As each number is unique I have added the fusion360 files and the instructions on how to create the plate in a few simple clicks. First download the (Kenteken…
Clutch alignment tool for BMW fine spline clutches. Spline is 32,5 x 35 - 26N this tool is compatible with clutches for gearbox: GS6-53 D Z - Diesel GS6-53 B Z - Benzin/Gasoline GS6-37 D Z - Diesel GS6-37 B Z - Benzin/Gasoline These…
If you like my work and want to support me bringing you new content please consider supporting me on Patreon https://www.patreon.com/FotisMint
I modeled the Dutch row houses featured on the Stroopwafels box. These models are the same size as the picture on the box and roughly 1∶160 scale (n scale) to a real building. To create the models follow the steps below: Note 1: the…
Lucky 13 Butcher Cleaver If you like it --> press like it :-) Butcher cleaver for the funny lucky 13 figure. The katana model is from kh4rj0 . Take a look at my models, there you can find some more equipment for lucky 13. Would be happy…
If you like my work and want to support me bringing you new content please consider supporting me on Patreon https://www.patreon.com/FotisMint An easy print with supports needed only for the back of the hat.
Using steel rod along each of the lateral beams and thicker panels, this case is sturdy enough to face the challenges of components like an AIO or larger air cooler. Magnetic panels, unique designs, front USB and print-in-place hinges.…
🇳🇱 Welkom in Nederland! Welcome to the Netherlands! This model was designed by Dany Sánchez in 2015. One of the most recognizable historical architecture of many cities in the Netherlands and Belgium, especially Flanders, are thin brick…
A clutch lever that should fit on most dirt bikes, and maybe other motorcycles (I have not tested anything besides off-road style bikes), you may need to adjust the clutch cable. Also supports are needed for printing the bit where the…
Hi all ! Very happy with the basic model but something was missing… So I decided to add a bent arm with a halberd… Then increase its size for an 80 cm model and bonus make blue bands on the sides of the thighs… Obviously full PETG for me……
This is my new project: a pusher boat, or a Dutch "opduwer" from 1927. "Opduwers" come in various shapes and sizes. https://nl.wikipedia.org/wiki/Opduwer The pusher is on a scale of 1:10 and is approximately 60cm long. The design isn't…
A sandwich style ITX case. 8 Liter volume @ 122 x 201 x 318mm. I also have a vertical style case with a smaller footprint (my preferred one) 4 printed examples at the bottom! The ugly one is mine :) Everything is printable on an Ender 3.…
Enamel pin clutch remover Overview Slide remover to take off rubber clutches from enamel pins. You can just insert the pin with clutch at the open top area with widened side opening and slide the pin to the bottom. It should slide right…
Overview I've struggled with knee pain while sim racing on my Fanatec Clubsport V3 pedals due to the brake pedal placement. Some folks have successfully swapped the brake and clutch pedals to help with this, but I think this is a sub-par…
in the Italian Christmas tradition like to consume dried fruit including nuts !!! so why not sit down and design a nutcracker made to ho .... I have provided some knurling in order to hold the nut more easily in position during the…
Clutch Alignment tool Suits Mazda MX-5 Miata B6/BP, also confirmed to fit ND miata. Not tested in other cars, but likely to suit more than just the miata. PLA with 50% infill was plenty strong enough.
Christmas Elf Nutcrackers are the perfect way to bring holiday cheer to family and friends! Features: Two designs (Alvin and Buddy) 22 inches tall (56 cm) Friction connectors (no glue required, but you can if you'd like) Instructions:…
A slipping gear is a very simple torque limiting device like the torque limiter of a drill. Why would you want that, and particularly in a RC car, which has an electrical brushless motor? One use case could be to protect the motor in case…
This is untested, but should fit the following models: Audi B5 A4 FWD 1.8T Audi B5 A4 Quattro 1.8T Audi B5 S4 All 2.7T Audi B6 A4 FWD 1.8T Audi B6 A4 Quattro 1.8T Audi B7 A4 FWD 2.0T Audi B7 A4 Quattro 2.0T Audi C5 A6 Quattro 2.7T Audi C5…
DIY Paddle Clutch PERSONAL USE LICENSE ONLY Files are for personal use only, non-commercial and not for resale Copyright by KODAI Racing Features Hall effect sensor Ball bearing movement Compact design Easy FDM printing A simple two-part…
You might have come across my slipping gear https://www.printables.com/model/490489-slipping-gear-clutch-gear-for-rc-cars and I have explained why I needed that. Now here is another piece of design that can work with my slipping gear but…
If you're interested in the commercial use of my models, earlier access, exclusive designs or if you simply like my work and want to support me, please check out my Patreon at https://patreon.com/29flo and subscribe to a membership tier…
The all time classic, a Traditional German Nutcracker! I've designed this one based on a real woodcrafted piece of my Grandfather. As i wanted to practice on designing, i gave this one a try! Tolerances are not high, so everyone can…
This is the clutch and flywheel required for the VW Engine model. Updates: 9/11/2025: Narrowed the clutch pad just a bit.
Classic Car from a classic era. Good luck Michael and please upload some pics when you print it, Cheers Jace
Original photo taken from: https://knowyourmeme.com/memes/josh-hutcherson-whistle-edit I will upload my own print photos when I print it for myself, I will also share my print settings.
Why? I needed space under the stairs :-) This is the third model in a series of wallmounts I published and am willing to publish in the future. Features: Stable wall mount to grab the front inferior wishbones Rc cars suspension locks the…
I needed a nutcracker, so here it is. The hinge mechanism is inspired by Gyrobot's aerospace nutcracker. This is a print-in-place design with 0.2mm clearance. No supports needed. Added a second version with a slightly smaller “small” side.
Summary Overrunning clutches, or freewheel clutches, are used in applications which require torque to be transmitted in only one direction. These clutches have traditionally been used in applications such as vehicle transmissions, engine…
Altura de capa 0.30 mm para demorar menos tiempo y queda muy bien
I love coffee. And I love travelling and finding new coffee shops, whether they are small, locally owned cafes or large coffee chains. As long as they have good coffee, I am there! Dutch Bros. is a coffee drive-thru chain that makes fun…
The leverage nutcracker made of carbon filament for cracking walnuts and other nuts. Print instructions STL: https://www.myminifactory.com/object/3d-print-fiber-force-leverage-nutcracker-23108
Welcome our new design of Nutcracker, you can easily and quickly crack walnuts and other nuts. The 3D model consists of 6 printed parts, and screws. Easy to print. No supports needed. We recommended printing this model from Prusament PC…
This is a crutch for a Barbie, the measurements are based on the basic model of a Barbie (the cheaper ones), however there are two versions of the base crutch, one for the barbies that are taller and a shorter version of the crutch for…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Spekulatius cookie cutter. Dutch motives, different versions. Print settings: PLA, 100% infill, 0.2mm layer height. Versions with different groove depth. Deeper groove gives better cookie imprint, but makes the dough harder to remove.…
Flying Dutchman / SpongeBob
Dutch Windmill ___________________________________________________ Windmühle im Stil eines Galerie Holländer Print Settings Printer brand: Anycubic Printer: Large Size Chiron Rafts: No Supports: Yes Resolution: 0.2 Infill: 15% Filament…
I've seen a great idea on reddit , but there was no stl available. So here is a quick implementation of it. You can see it in action here You can try without spring, but to be honest feels a bit odd. With spring, however, these are…
Make great looking Nutcracker cookies! Printed in PLA+ with a .2mm layer
I just broke my leg and got my first set of crutches. So naturally while waiting for surgery to install screws and a plate into my leg I needed to check out what I would want for 12 weeks of crutches. This brought me to the beer holder…
Meet the Articulated Nutcracker Buddy — a small but mighty Christmas companion full of festive charm! 🎁 Height: 63 mm 🎄 Features articulated legs for playful posing 💫 Perfect as a holiday desk accessory, shelf sitter, or a fun collectible…
I printed the lever and adjuster in both PLA and PETG using the built in profiles in PrusaSlicer but with 50% infill. Both levers have worked well for test rides. I plan to do some trail riding to see how the lever holds up, but so far…
An extension for the sensitivity button on the Razer Basilisk V3.
Here is the model for Nutcracker Bear. The Nutcracker is a good Friend of Barry, and like his friend he seems to just want to be your friend too, do you have space for The Nutcracker? maybe he can keep Barry Company. I hope you enjoy, and…
Hello, to download Clutch To The Meat Grinder Zelmer Diana 1500W, it is possible that it matches other models of the Zelmer part is my production from the beginning of the planning stage to the final stage, If you want you can always…
The original file I found somewhere in the internet. I cutted it into pieces to print main parts in different colors. Enjoy :-) Category: Buildings & Structures
Clutch gears in a variety of different sizes compatible with Lego, 10 teeth to 40 teeth. I can make bigger if you want, but I dont think anyone would have a use for it. Tolerances are lot better now than the old gears. The printers have…
The best gearbox in the world: 6-speed H-box + reverse gear Sequential (we go from one to the other in 3 seconds) Clutch mode (optional): if you don’t press the clutch pedal, the gearbox stays locked (only in H mode) Multiple attachment…
Dear model builders, I would like to introduce a new model of the Dutch Rijkswaterstaat boat (vlet) “Bellona”. This launch was built in Zaandam in 1984 and sold to a private owner in 2008. More information can be found on these two…
Remixed from the original design by Fredrik_JBE as found here: https://www.thingiverse.com/thing:1673376 , but I made it suitable for 22mm crutches. Credits to the original designer. I printed two of them in PETG and they 'stick' enough…
I made the mistake of putting a lid on my Lodge cast iron dutch oven before putting it away and the oil inside the oven went bad. After scrubbing it out and re-seasoning it, I designed and printed these spacers to keep the lid from…
This is a hook which clips onto a crutch, with the purpose of holding a bag from the crutch itself. I had an accident recently for which I'm now in crutches and wearing a bag isn't safe so I was after some way of carrying things without…
BTT UTC / FLY UTOC - Din Rail Mount
This is a modular system for crutch accessories. Inspired by @NikReitmann_10557 's design. Tried and tested on various Christmas markets. 4 M3 screws + nuts required. You can edit these models in OnShape. Check the “Features” panel on the…
Introduction A Dutch license plate key chain script to be used with OpenSCAD. OpenSCAD is free software: https://openscad.org/ The script needs a 2024 version of OpenSCAD with “manifold” and “textmetrics” turned on. The script does not…
Nutcracker Marvin designed to be printed in parts to allow separate colors without requiring an MMU and press fit. Notes: Arms, Legs - work best when printed with a brim. Arms/Arm pins/Cuffs/Hands/Legs/Shoes/Soles/Laces (and the parts to…
My friend needed a way to hold her water bottle while moving around with crutches so I designed this for her. Will fit a bottle with about 80mm of thickness or less. You can also throw your phone or anything else into it. I print it with…
Hey! This is my first model. It combines the penultimate gear (the one before the hex gear the fan sits on) with a clutch mechanism. In theory, this allows the fan to freewheel, without all of the remaing gears and squeeze trigger being…
Dutch Vehicle Registration Plate Template This template was originally created for my son's birthday, so he could share it as a gift in class. It includes a small hole for use as a keychain. To easily add your desired text, download the…
Tolerances are tight. Make extra sure the hinge of the lever that goes into the wing moves properly. The body and the wings have 1 hole each for a 6x3mm magnet to be glued in (the body has it on the inside). The holes on the back are for…
Blink camera mount for Dutch lap siding (Menards)
Inspired by a video from Maker's Muse I've seen on YouTube, I wanted to see how small I could take it to get a functional model from my "not that exact" Anet A8. This is what I came up with, designed from scratch: About 32mm in diameter…
Update 2024/11/07: Added 2row_molle_clip to use with the micropals grip versions to let you horizontal mount them on SCRD style 2row molle belts. Print a mirrored pair per holder. Update 2024/10/28: Added…
Make a desk hutch with standard 5/8" closet shelving boards. Pictured is a 10x36" Rubbermaid closet shelf. Legs formed from cutting 8" sections of another identical board. Use #8x1/2" wood screws to secure the boards. Glue will stiffen it…
A simple open-frame PC case for an ITX motherboard. A build guide is included in the files. Compatibility: ITX Motherboard SFX PSU 2.x Slot GPUs Any height CPU air cooler (heavier/bigger might get sketchy) 2 front USB ports 16mm Power…
09Apr23: Initial release Nutcracker Drosselmeyer designed to be printed in parts to allow separate colors without requiring an MMU. About 12.75" tall without base. Notes: Recommend assembling from the base up Base without date included…
Resolution: 0,2 Infill: 20% Material: PETG You need additional: 4x Screws M6x25 4x Nuts M6 You can clamp the bottel holder to crutch-diameter up to 20mm. More designs: https://step-3d-druck.de/impressionen 3D-Printing-Service:…
PLA reicht völlig aus, ich drucke mit Stützen, da der schräge Teil sonst nicht perfekt wird. Infill ≥50% PLA sufficient, use supports.
These files are designed for the most part for laser cutting. But if you are not confused by the small size, you can also print them on a 3D printer. To increase the size, you can cut these models into pieces, print them separately and…
Summary This Floating-Opposing-Arm (FOA) Centrifugal Clutch, developed by the BYU CMR lab, utilizes compliant mechanism technology to produce a high performance clutch with only two components. The clutch shoes are fabricated from a…
