Counting matching models…
This is my interpretation in Gauge 1 (1:32) of the DE1 railcar designed by Allan (Rotterdam) for the “Nederlandse Spoorwegen” in ‘50’s. https://en.wikipedia.org/wiki/Blue_Angel_(train) https://nl.wikipedia.org/wiki/Blauwe_Engel These…
This is my new project: a pusher boat, or a Dutch "opduwer" from 1927. "Opduwers" come in various shapes and sizes. https://nl.wikipedia.org/wiki/Opduwer The pusher is on a scale of 1:10 and is approximately 60cm long. The design isn't…
Juwel lining cover / Infeed lid Futterdeckel Aquarium für Juwel 180 Liter 0,16 Layer 0,4 Nozzle Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: Doesn't Matter Supports: Yes Resolution: 0,16 Infill: 20 Filament: Prusa PLA black…
This is a lid for Juwel RIO 125 LED. It is useful for allowing ventilation and lowering temperature and adding features. This version is for printing on prusa mini (and similar). I added a mid part without a grabbing hole, parts without…
Mount for the helialux Spectrum and Smartcontroler 4 screws were used for mounting it to the wall size: 3,5 x 19 mm
We have a Juwel 70 aquarium in my kid's room. The original air diffuser, included by the Juwel BioFlow One Filter/Heater combo works fine, the water current in the fish tank was so strong, that the fishes acted irritated. Also, the tuning…
Mit diesem Tool Sitzt der Wellendichtring an richtiger Ort und Stelle und wird nicht zu tief oder zu wenig eingeschlagen ! Tool ist kompatibel mit Verschiedenen Hersteller bzw. Verschiedene Modelle der Hersteller -Piaggio -Aprilia -Gilera…
This is a filter basket for a Juwel Bioflow filter setup. It has the dual height of the normal replacement filter basket. You can use it for cheaper refill filter pellets. Dimensions: 90mm x 90mm x 90mm A variant with and without holes in…
Alternative to the original Juwel Bioflow Outlet, this is a nearly silent waterfall outlet for the Juwel Bioflow Super The outlet can be printed out without support, as there is already including a support, which can be cut away easily…
Since i dont want to always open the big lid of my Juwel Aquarium, i made this sliding feeding flap that fits into the 155x55mm cutout. Also added a locking contour into the flap, so it cant accidentally be opened. I've printed this with…
The Juwel 120 is a great Aquarium but its pump is on the rather energetic end of things. I experimented with a lot of diffusers and finally ended up using a random one that had just one downside: It was straight. The pump outlet of the…
Tisknuto z PETG, výška vrstvy 0,15
ℹ Note The English version of the description follows below the German version . 🇩🇪 Deutsche Beschreibung 🧺 Filter-Körbe für einen Juwel Bioflow M Filter Bei unserem neuen Juwel Lido 200 Aquarium war ein Juwel Bioflow M Filter eingebaut.…
Simple protective Case for Uwell Caliburn G2. Although it is not necessary, I advise printing the case with a brim.
The Juwel Bioflow One aquarium filter and heater combination, utilizes an O2 diffusor which narrows the 16.5mm outlet to a 10mm “jet” to inject air into the water. One downside can be that this jet creates a strong current in the fish…
I thought I have published it but apparently not - this is simple remix of Juwel Bioflow M filter GItter so that it can be used with skimmer. I have been using it for some time already - just beware that it might require small…
Juwel Aquarium Replacement Lid for Bioflow Filters Print Settings Printer: Geeetech Prusa I3 pro B Rafts: No Supports: No Resolution: 0.2 Filament: Standard 1.75mm PLA PLA Category: Pets
女儿的高低床没有合适的杯子架，特地设计了一个，再不用担心猫会把杯子子打翻了。
Tisknuto z PETG, 3 perimetry
Prints without supports facing the downside on the Buildplate. Simple Design.
I wanted a space-saving base for my Caliburn G3, and since there was nothing comparable available, I went ahead and created one myself. It holds 2 pods and 2 bottles. Prints perfectly without supports using the following settings: PLA…
Just a simple carry case for my pods... Print instructions Category: Other Summary Just a simple carry case for my pods...
I did not find any good solution to mount dosing tubes on my Juwel Rio 450 aquarium, so I decided to create one. This design fits on the Juwel Bioflow filter without any modifications. As I'm using colored TPE tubes from Red Sea with…
Hopper for https://www.juwel-aquarium.de/en/equipment/extras/automatic-feeder/smartfeed-2-0
Stop food for SmartFeed Juwell prevents the food from ending up on the floor or scattered over the aquarium lid. I tried
I loved my new UWELL G3 Pro vape, but I found its built relatively fragile in relation to it weight. So I decided to make a TPU sleeve to protect it from potential drops. Known Issue The sleeve covers error icons, so troubleshooting…
This was meant to cover the whole of the side wall of my aquarium, but it had to fit in my Core One. So I made it half the size. I recommend that you print 4 of these and tie them with fishing line. Use PETG. There is space for generous…
Designed a new lid for my aquarium to lower temperatures while keeping the fish from jumping out of the tank. This lowered my temperatures around 3-4 degrees, without adding a fan.
There's a few versions of these on here but none that I could find that are compatible with a tank that has a plastic edging around the top of the glass. This results in a wide gap being needed to be able to slip over the glass. This…
Printed with PETG and 15% infill. Print what ever you need. If you don't want the plant covers just print additional front one and same with the middle part. Clips are to prevent the parts from sagging if the led cover is not centered.…
My friend needed something made to allow him to connect up a standard hose to his pump, so I quickly measured and modelled this adapter. I figured there might be other people out there who can use this, so may as well share this with…
Mount for EHEIM autofeeder+ to mount on Juwel auarium in basic place. Print in 2 parts. No support need Current setup: EHEIM autofeeder+ and Juwel Rio450
This is a remix from https://www.thingiverse.com/thing:4272270 compatible with the Juwel RIO 450 Aquarium. Added 6mm holes (e.g. for dosing) Dosing tube mount: https://www.prusaprinters.org/prints/138993
If you own a Juwel aquarium with a Bioflow filter , you probably know the struggle: over time, fish poop and debris accumulate between the filter and the aquarium glass, making it very difficult to clean. To solve this problem, I designed…
A simple cap to protect the underside of Uwell Caliburn Pods. The pod simply clips into the cap and it shouldn't come off by itself. Print Settings Printer Brand: Prusa Printer: Mini+ Supports: No Nozzle: 0.4mm Resolution: 0.2mm Infill:…
This protective sieve for the Juwel Eccoskim (water surface cleaner) is intended to ensure that no aquarium inhabitants get into the device. Tested on my own aquarium and it works. I print it with lower speed because of the fine…
Please be advised that having LED connected during cleaning is NOT RECOMMENDED. Anyway, if you are aware of the risk, simply print, glue it together and enjoy your Juwel aquarium maintenance (used for Juwel 120), see photo to understand…
Had a lot of swimming plants blocking the filter inlet of my Juwel Aquarium with Bioflow Filter. Ite works great. Orange color is just for you to better see it. Its 7,7cm wide, you have to sqeeze it a little bit to get it in - this is for…
I love the Nutella Candy Dispenser but didnt have the correct glass jar so I made or adapted existing parts so that a 190g Douwe Egberts coffee jar could be used. This jar has a stopper design so I made it a push fit into the “coffee ad…
Just a simple carry case for my UWELL Caliburn... Print instructions Category: Other Summary Just a simple carry case for my UWELL Caliburn...
Ich habe hier 2 Ausströmer für den Juwel Filter erstellt, für den Co2 Anschluss braucht man eine Stützstrucktur.
Tisk - Ender 3 Teplota tisku - 205°C Teplota bed - 50°C Výška vrstvy - 0,2mm Tisk bez podpěr Dokovací a nabíjecí stanice pro elektronickou cigaretu Uwell Caliburn a držák na 2ks liquidu.
Halter für 2 Juwel Helialux Lampen ohne Abdeckung mit einer Aquarienglasstärke von 8mm
uchwyt na kuwety średniej wielkości
Eheim Futterautomataufnahme für ein Juwelaquarium. Feederholder_1 und Feederholder2 werden zusammengeklebt. Update 03.02.2022 Ich habe festgestellt das sich am Trichter und unter dem Futterautomat zuviel Feuchtigkeit gesammelt hat.…
Chihiros Dosing System tube holder designed for the Juwel Lido 200. This mount fits on the edge of the tank, no glueing or similar needed. Supports should not be needed if the print is aligned on the side as shown in the picture. For the…
My buddy was traveling and asked me to make a quick lanyard for his Uwell Caliburn G2. Not all nice and rounded, but it has open ports for the air vents and USB-C port on the bottom (and access to the charge light). Quick and dirty, but…
This is the voronoi edition of my cover system for Juwel Rio 125 fish tank. For further parts and instructions look here: https://www.printables.com/model/684272-modular-lidcover-system-for-juwel-rio-125-led-aqua See also my other fish…
Just a simple charging dock... Print instructions Category: Other Summary Just a simple charging dock...
Use the models as you want, the fan can just be stuck on, but it's for a 140mm fan! The feeder fits perfectly into the cutouts and won't fall out on it's own.
The non-dimmable LED tubes on my new Juwel Aquarium were too bright to my taste. So I designed this dimming cap for Ø 15 mm LED tubes. 6 caps were needed for my Juwel 125 Rio aquarium. I printed with black PETG. The dimming cap simply…
Riser and funnel for Juwel EasyFeed for less spills
Collection of various feed-throughs for hoses for a Juwel aquarium. As my 240 litre Juwel aquarium is positioned with both long sides in the room, the standard hose feed-throughs have always bothered me a lot. They are ugly and the hoses…
Einfach die Magnete aus den Gizeh Papes benutzen, sollten viele ex Raucher rumzuliegen haben ;)
box for storing tools on the edge of the aquarium during maintenance.
The barrier fits over one of the support beams of the Juwel 450 aquarium. It was made for 6cm wide beams so maybe it fits other models too. And if a different size is needed it should be pretty easy to adapt. They are made so that they…
Der Skimmer kann ohne Support gedruckt werden
Juwel Helialux FlexFix with top mount
I bought a juwel 240 aquarium secondhand but it was missing the seal around the outlet. So i made this replacement seal. I have printed with PLA and no supports.
Sleeve/case for Uwell Caliburn AK2 Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: Doesn't Matter Supports: No Resolution: 0.2mm Infill: N/A Category: Other
Ever had that? You stand at the bus station, people everywhere. You want to take a deep drag of your vape without looking. You take that drag. And then it hits you: there was a piece of lint in your trousers pocket, and you inhaled that…
The guide helps that the inlet and outlet pipes of the external filter stay in place and have the correct height on my Juwel Trigon 190 aquarium. The guide is design for pipes with a diameter of 18,4 mm and an arc that is approximately…
First time modelling anything. Might as well do a remix/remake charging dock for the Uwell Caliburn. Still a work in progress, as currently the only way to keep it upright on a desk is with blue-tack. Future ideas include a slight space…
A Drip Tip for Uwell Fancier. Printed mine in 0.08 Category: Other
Here is a charging station for the Caliburn Koko
This is a holder designed to hold exactly 3 original Uwell Pods without much wiggle-room to reduce potential noise. It also features a snap-fit top cover to hold the pods in place. Print Settings Printer Brand: Prusa Printer: Mini+…
Two spare parts for an old composter from Juwel (R). The original parts did not break, but got lost during the life time of the composter :) FreeCAD design files are included. STL files are rotated for the maximum strength and good…
I did see some other models with replacement clips, but not necessarily with both clips for the top and the sides. Therefore I modeled these. They are not 100% exact replicas of the original, but close enough. And they work similarly…
Zwerg Uwe – Der freche Garten-Gnom 😎 Lerne Zwerg Uwe kennen – den wahrscheinlich coolsten Gartenzwerg für dein Beet, deinen Balkon oder dein Wohnzimmer. Mit seiner knallgrünen Farbe, stylischen Sonnenbrille und seiner unverwechselbaren…
I made a UWell Caliburn G Case with a Lanyard Hole for protecting and carrying around your Caliburn G. The case is quite snug so there is little chance of it falling out and getting lost. Also left space in the bottom for the charger to…
Do pobrania uchwyt do odbłyśnika Juwel HiFlex, uchwyt do montażu na ścianie... XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX Download Juwel HiFlex reflector holder, wall mount bracket ... - Jeżeli chciałbyś zapoznać się z tym co robię na…
This are active cooling parts for my cover system for Juwel Rio 125 fish tank. For further parts and instructions look here: https://www.printables.com/model/684272-modular-lidcover-system-for-juwel-rio-125-led-aqua See also my other fish…
My vape measures 11.5 x 21mm. I think the support also goes with the other models of caliburn pods Holes for e-liquid bottles are 30mm (50-60ml bottles) Print at 104% to make sure the bottles go through I will update the model soon. The…
verschiedene Abdeckblenden für das LIDO 120 Aquarium von Juwel die Modelle werden noch erweitert ;)
Easy model, printed in PETG with 0.6 nozzle in my case, can be printed with any infill, any layer hight and any material I suppose.
Aug. 15, 2025 V2.0: First release on printables To my knowledge, this bracket is not available as a spare part and since I needed one, I designed it myself. It fits my JUWEL aquarium lid, but may also fit other brands. USE PETG!
Einfache Schutzhülle für die Uwell Caliburn Explorer. Da mir die Caliburn immer aus den Händen gleitet, habe ich eine Hülle zum Schutz gezeichnet. Gedruckt habe ich in TPU. Es gehen aber auch andere Materialien.
This is a print-friendly model of the bioflow-super fish tank filter cover from Juwel Aquarium. There are two versions: Similar to the original cover A closed up version to prevent crabs from entering the filter ;-) Ensure to use a (more…
I didn't like the long drop from the top cover when feeding so i made this small thing to slow down the drop. Works with my non Juwel automatic feeder also. Print Settings Rafts: Doesn't Matter Supports: Yes Resolution: 200 Infill: 20…
The Eheim fish feeder is one of the best designed models. This is the adapter to match Juwel Primo aquariums . There are two different funnels included: Short one, which just ensures that the food does not spill around and lands inside…
Just a simple carry case for my pods... 4 pods Print instructions Category: Hobby Summary Just a simple carry case for my pods... 4 pods
Are you tired of wasting half an hour opening plastic bags and setting up the game table? Then this Organizer for the board game Caverna from Uwe Rosenberg it's for you. It's designed to fit the original game box Caverna the Game Farmer…
Our fish had some eggs on the pane of the aquarium and we wanted the little ones to be safe from the filter. Also we wanted them to breed with the same water, as they will live in later. Easiest way is to let them grow inside the tank. I…
A replacement clip for the Juwel composter. Print in something durable and weather resistant like ASA.
Antoni van Leeuwenhoek – Buste 🇫🇷 Description (Français) Ce buste représente Antoni van Leeuwenhoek , pionnier de la microscopie et figure majeure de l’histoire des sciences, dans une interprétation sculpturale fidèle et sobre. Il est…
Juwel EasyFeed - automatic feeder holder
Uwell CALIBURN 11W Pod System Button Replacement
A lid for the screw-in ground socket of rotary clothes dryer. For everyone who has a screw-on ground socket and wants a different color of the lid or has a broken original lid. print settings: PETG, 0.20mm structural, 0.4 nozzle, 15%…
Druhá verze adapteru bez nutnosti použít SERA podložku. Navíc je více otevřený a nesráží se tolik vlhkost.
Ein Ständer das beim laden das Gerätes kein liquid auslauft
This filter outlet pipe should fit Juwel EcoFlow pumps and is designed to reduce the water outflow speed using the Bernoulli principle. It’s easy to print, and no supports are needed if you position the filter outlet pipe with the wider…
The Juwel Bioflow Super is meant to be glued on the fish tank glass. I rather like to have them fixed with suction cups, so I created an adapter between the Bioflow-Super Filter and four Eheim Suction cups. What you need: Juwel Bioflow…
A mesh feeder that will fit into Juwel Lido 120 fish tanks. Will probably also fit into other fish tanks made by Juwel and other tanks with a rim thats 15mm (0.59 inch) or thinner. Just hang it over the rim, throw in your cubes or frozen…
Abflussfilter für Juwel Timber Pflanzenwanne/Tasse (https://www.juwel-garden.com/timber-pflanzkasten-fuer-balkon-und-terrasse.html) Um das Verstopfen des Abflusses zu vermeiden habe ich diesen Filter konstruiert. Immer wieder haben die…
Aufsatz für Juwel Aquarien damit der Hobby Futterautomat passt.
PET-G used, printed with support, 0.6 nozzle, 0.2 layer height.
Wellendichtring-Montagewerkzeug Selbstgedruckt für Peugeot stehend Roller Warum ist ein Spezialwerkzeug für Dichtringe sinnvoll? Der korrekte Einbau von Wellendichtringen ist entscheidend für Leistung und Langlebigkeit des Motors. Die…
Covers for openings at the back of Juwel aquarium. Cover1 has two cutouts at the bottom for power cables and air hoses. Cover2 has second opening at the top, making it easier to use pickup filters.
I do like the Automatic Fish Feeder Thing:2959685. I have an Juwel 300l Fish Tank with an 120x60 hole in the cover so i need an different mount. i do also like to have an bigger hopper. You need to print the three parts from this "Thing".…
![Sliding Feeding Flap [Addon for Juwel Aquarium Lid]](https://media.printables.com/media/prints/518195/images/4194163_365af7b8-9a8a-4ed4-b274-8b770f064af5/img_20230702_151303.jpg)
