Modular lid/cover system for JUWEL RIO 125 LED Aquarium
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Modular lid system for adding e.g. feeder, fans and slots for ventialtion. Prusa mini size compatible!
- Rating
- 5 / 5
- Likes
- 53
- Downloads
- 248
- Makes
- 1
- Views
- 2,250
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Pets
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a lid for Juwel RIO 125 LED. It is useful for allowing ventilation and lowering temperature and adding features. This version is for printing on prusa mini (and similar).
I added a mid part without a grabbing hole, parts without slots and other special parts.
You can combine what you like to make your dream cover :-)
update 18.12.2023:
reduced thickness from 2.75 to 2.5mm. Added mid parts for juwel feeder and fans. Fan parts are work in progress!!! it should be usable - use stainless screws or those rubber fan mounting thingies. Rename the model
update 20.12.2023
increase size for side parts by 2mm, because overall length was 4mm to short. Replace slotted_mid_c.stl with correct version (I messed up the files ;-) )
update 21.12.2023
add side parts that can be flipped up. add a special mid part with slide-able cover.
update 15.02.2024 add parts for dosing tubes (I use the chihiros dosing system), add the voronoi parts from the contest, readd fan parts
print instructions
you need to print:
- 2 side parts (solid or slotted, as you like)
- 3 mid parts. choose mid part combinations as you like
settings:
- I reccommend PETg, other will be fine too - except for the specials_mid_slotted_slideable_part2.stl. This must have a bit flex and should be printed in PETg
- 3 or 4 bottom layers (3 to save time and material)
- 15% infill
- 4 or 5 top layers (4 to save time and material)
- on prusa mini and similar sized printers, disable/tune skirt otherwise it won't fit on the plate
post processing specials_mid_slotted_slideable_part*.stl:
- part 1: clear angled edges with a exacto knife from debris
- part 2: if necessary use a file on long edges to make them smooth
- assembly: put one side of part 2 into part 1. bow part 2 a bit and then slide the other edge into part 1. Look for orientation!
- if part is not gliding well, repeat the exacto knife and file step …
assembly/post processing specials_mid_fan*.stl:
- you need a 120mm or 50 mm PC fan, depending on which part you choose.
- 4x screws M3 10-12mm in length.
- place screws in the fan and then place it on the lid part
- screw it in place
Additionally you need some sort of control electronics. I highly recommend to use a PWM controller. There are ready made PC fan controller available or you build something on your own. When summertime arrives, I will have the needed controller and I will update this page with my knowledge.
See also my other fish tank stuff: https://www.printables.com/@Antimaterie/collections/973165
Additional notes
I'm interested in your feedback to improve my stuff! So give me likes, post makes, comment and rate the print to show others and me how well it goes.
If you post a make, let me know which filament you use.
If you want to support me by donating a coffee go to https://ko-fi.com/antimaterie I would really happy about it. The money will be invested in all stuff regarding 3d printing to give more and better quality models.
In general my Prints are not for commercial use, but if you are a print farm owner and want to sell some of my stuff, please contact me.
Hope you enjoy my models.