Counting matching models…
A conversion of the ETP-Bot V2 heads making them compatible with Lucky, Easy, Mini and Dummy 13s! Print instructions: Layer height: 0.15mm (0.2mm first layer) Wall Ordering: Outside to inside (Cura) / Print external perimeters first…
Keychain Collection V13 20 different Keychains! Follow Please! My New Group: https://www.printables.com/de/group/3d-printer-group-for-epic-figures-eQ3qerR/comments
Just a little camera housing to fit a HBV1313 PCB with OV2659 chip onto the right side of any Voron 0.1 / 0.2 extrusion without preloaded nuts. Due to easy printing the 2x clips have to be glued onto the slots at the upper side of the…
I decided to mess around in Blender, model a bunch of eyes and slap them on a blank ETP-Bot V13. These 6 new expressions are the results of my inexperienced endeavors! These are just the inner parts of the head, please head to the page of…
The SV133 is a low cost manual filter wheel that suffers from some unfortunate light leaks through the control wheel. Other brands (eg. Astromania) also offer nearly identical models that would probably fit as well. This cover goes over…
this is a one piece coasters i have created a complete series of coasters about one piece don't forget to see the rest of the models and leave me a like thank you CUB SOCIOS: https://www.printables.com/@tecnoculebras#join:484 PATREON:…
It's an adapter for connect vacuum hose to the sander
The holder is made for a light blub socket with the following dimensions: 5.75 cm tall and 4 cm in diameter. And the hole for the wire is roughly 0.6-7 cm in diameter.
Computer bay mount for JetKVM. Fits into a double-height 5.25" bay. The JetKVM itself is now flush(ish), so it doesn't stick out so much. Additional parts: JetKVM & ATX Power Control https://jetkvm.com/ Mounting bolts for the JetKVM: 2x…
Decorative Seashell – Ocean-Inspired 3D Model Bring the beauty of the seaside into your home with this decorative seashell model. Inspired by the elegant shapes and natural curves found in real seashells, this design captures the timeless…
A functional, 3D printable replacement for the original bottom case (lower shell) of the Acer Aspire V3-372 laptop, also known as the Aspire V13 series. It's higly recomended to printi it at a very high resolution. Due to the dimension…
Decorative Mushroom – Nature-Inspired 3D Model Bring a touch of the forest into your home with this decorative mushroom model. Inspired by the elegant forms of real mushrooms, this design features smooth organic curves and a clean,…
When installing a MicroAir thermostat in my Alliance Valor 40V13, the trim work got in the way. Rather than trimming the trim work, I created this adapter plate that I screw into the wall, then use 3M Command Velcro strips to mount to the…
Simple mount for the JRK G2 18v19 and 24v13 USB Motor Controller with Feedback. Use M2 screws to attach the board to the mount Use M4 Countersunk Screwes to attach the mount
a dust connector for hikoki SV13YA
After hitting my head in the cellar with the gopro mount it finally snapped.
I purchased an V13TST HD wifi camera for my Televid. The diameter of the Leica APD Televid eye peace is 58,8mm. The V13 should handle eye peaces up to 65mm. But no. So I created an adaptor that snugly fit the eye peace that the V13 camera…
Computer bay mount for JetKVM. Fits into a double-height 5.25" bay. The JetKVM itself is now flush(ish), so it doesn't stick out so much. Additional parts: JetKVM & ATX Power Control https://jetkvm.com/ Mounting bolts for the JetKVM: 2x…
My smashed and bashed laptop was missing one of its bottom feet. I removed the one that was still there, measured it and this is the end result. You can attach it with superglue or strong double-sided tape. - 0.2mm layer height - PLA,…
After hitting my head in the cellar with the gopro mount it finally snapped.
Libre à vous de changer l'orientation des pièces dans votre slicer résolution 0,20 remplissage 17% besoin de support pour le fichier suivant: caisse
velmi mě iritovalo přehazování řemenu na vrtačce tak jsem vymyslel toto povolil jsem šrouby na jedné straně vedení motoru nainstaloval jsem perpentikl a hned je to funkčnější stroj
T-spline Spiral Vase designed in fusion 360, print in the orientation of the model with no supports.
I have remodeled the psu_cover_v131 for my Mornsun LM100-22B24 You need the below items which are available online and local market C14 Power Connector https://www.amazon.in/Black-Rewirable-Power-Connector-Socket/dp/B08L6SBFNP?th=1 Rocker…
My smashed and bashed laptop was missing one of its bottom feet. I removed the one that was still there, measured it and this is the end result. You can attach it with superglue or strong double-sided tape. - 0.2mm layer height - PLA,…
Travel Dial Indicator Arm for 1” Dia Pole v13 This was designed for a 8H6 clearance for the indicator mounting stem. If your printer prints undersized, you can ream it. Mine fits perfect. This mount is for my new mini granite plate. On…
Shower Tray for 10mm glass. has three hooks for the other side of the glass. Print with supports. Fusion 360 file included. The honeycom base is 3mm thick. You can make it thicker (or thinner) by opening the fusion file and press-pull on…
Print it with lightning infill, otherwise you'll use a lot of material and it will take a long time. I printed with a high layer height but the layer lines adds a nice touch to the design. Roughly 140 grams with lightning infill and…
