Counting matching models…
Vaporesso XROS 3 Series Drip Tip This is a remix of a model made by CHAOSXSPIRIT that can be found here. I have changed the drip tips design by making it smaller so it prints faster, is more comfortable, and uses less filament. I have…
Another take at a working tip replacement for a Vaporesso XROS series pod. Printed as is, tip down, and with a brim. Might need post processing to smooth sharp corners. (Fixed this on the current version v4) Lemme know if this works for…
For Vaporesso XROS Standard and Mini. Same pod. Just chuck it at your printer and go. Got no time for it. Maybe will polish it up a bit later.
English I made this model for my Vaporesso LUXE XR MAX there is a slot to slide the usb C cable inside, for the cable I used a usb C fast charge from Xiaomi (it is possible that it is a little bigger than the ordinary ones) you can pass…
This model is a sleeve/case designed for the Vaporesso XROS 3 Mini vape. There are openings for airflow, charging port and LED. Printed on my Ender 3 V2 with 0.28 Layer height and 0.5mm line width. Tollerance is thight but works for me.
This is a vaporesso cap for pods MTL and RDL. I have the two models (RDL AND MTL) and it works great in both but in RDL is more tight. I printed in TPU and PLA (the images are in TPU) and it looks great in both, but in tpu filament it's…
Please comment, rate, and post a make! This is a case and dock for the Vaporesso Xros 3 vape. The case is friction fit and will need a little encouragement the first time you slip it on. The dock has a hole for inserting the USB cable…
Please comment, rate, and post a make! Be sure to check out my other models! A relatively simple case for the Vaporesso XROS Pro vape. Having used this brand for an extended period of time, I know that the USB port can get worn…
When chilling to some music or bashing the laptop keyboard I like to make a quick swap of an empty pod for a full one. Here are simple stands to hold a Vaporesso Xros 3 or Xros Pro with slots for two spare pods, designed in Tinkercad. I…
Printed in Geeetech TPU 95A. Using PLA or PETG might be a little too snug. The hole fits a necklace cord with a maximum diameter of 3mm. The cord I used has a 2mm diameter, but the part that connects the necklace together is 3mm, so I…
Designed to work with Vaporesso Xros Series Devices, should work with XROS 1, 2, and 3, Mini or Non-Mini, etc… Has holes for magnets and can be stacked on top of other organizers but not underneath them. I have not included the ‘XROS’…
Here I have constructed a box to neatly store up to four pods of the Vaporesso Luxe X2 e-cigarette. There is a recess for a 3 x 1.7 mm neodymium in each compartment. This means the pods are tightened a little and don't fall out of the box…
Store a Vaporesso using Gridfinity 1x1 Grid. Modified model to store two 10ml bottles of liquid on a Gridfinit here .
A box for holding Vaporesso pods. Place for 4 Pods. Use filament for hinge Updated with better tollerances.
Vaporesso XROS mini holder to hang around nek. Prints in 40 min. Use PLA. You just need your own keyring and lanyard. You can charge it while in the holder.
A simple support screwed on the corner of the desk to maximize its space
Stand for Vaporesso Gen200 S for charging, cleaning etc. It simply falls too easy so i wanted it to have a good standing ;) Halterung für Vap. Gen 200 S um Verdampferdeck zu warten etc. Das Ding fällt einfach zu leicht um und darum wollte…
A caddy that holds up to three Vaporesso Luxe X or Luxe XR pods.
Simple protective case for Vaporesso GTX One Although it is not necessary, I advise printing the case with a brim.
I bought recently the GEN 80S vape from Vaporesso. Very happy with the shopping but I got two problems: The drip get dirty when you put in the pocket and can leak some liquid so I wanted to create a tap to transport without worries. The…
Stand for Vaporesso Gen 80 S mostly for charging .. ist falls to easy. Pic shows print with fuzzy skin - not that nice but it works.
a case for vaporesso xros cube case with ring for more grip need support for the ring printed fine with pla or petg
Stand vor Vaporesso Xros where you can hold your device, four Heads an Liquids
Store a Vaporesso and two 10ml bottles using Gridfinity 2x1 Grid. For just a holder without bottle storage using a Gridfinity 1x1 grid here .
I have a target 200 ecig with broken battery door which are not closing. I've created a print that can be used to hold battery door in place. I've printed it in PLA 0.2mm infill 10% will be enough, 3 perimeters
Printing Vase Mode 0.2 mm layer height 5 bottom layers 1 mm perimeter/wall thickness Materials: PLA, TPU, ABS, …
Ich habe hier eine Schutzhülle für die Vaporesso Luxe XR Max. Seitliche Airflow ist frei sowie einen kleinen Haken für Bänder oder ähnliches. Unten ist der Zugang zum USB Port frei. Einen kleinen aber stabilen Taster wurde integriert.
I've got a couple spare Vaporesso Xros batteries, and needed somewhere to store them. I'm using them with the Vaporesso Xros Mini, but it should fit V1-V3 mini, and I think the larger sizes as well (If I'm wrong about that, do let me…
I designed this cap to protect my Luxe XR Max when carrying it without its pod. Requires x4 5x3 round magnets to be glued. To be printed as-is, no support or whatever required.
My printer is pretty well calibrated, so it fits really nice on my Armour G, but there is a small rim inside that you can file down if yours is too tight. Also you might want to grab onto the pod itself, so you don't rip it out. Should be…
So I really like lanyards for my salt nicotine vapes, but i always break the attachment points so I came up with this sleeve very quickly using Orca Slicer and @ UpstateDesigns Simple Beveled ring.
a protective case for the vaporesso gen 2 mod to be printed in tpu
A simple caddy for Vaporesso Eco Nano pods. Holds three pods.
This cover is used to avoid pressing the keys in a slothful way. The power buttons are covered, the activation button retracts but is easy to press. There is also a version with a Pirate logo. Before Printing Enable Supports
case per vaporesso eco nano/nano 2
Eu estava cansado de trocar o vidro toda vez que meu vaporesso caia no chão, resolvi fazer meu próprio compartimento, com impressão em PETG, encaixando exatamente da mesma forma. Um com o mesmo volume e um que pra mim atendeu a mais de 4…
This dock allows the device to charge in an upright position using a 90-degree USB-C adapter, ensuring convenient and efficient charging. The design provides a secure fit for the e-cigarette, preventing unnecessary strain on the charging…
Tapadera para el vaper Vaporesso GT80,tambien puede usarse en el GT40 Imprirmir en TPU
Cover per svapo Vaporesso GEN 80 S. Stampare in TPU No supports
IMPORTANT ! Smoking is harmful to your health, causes psychological and physiological addiction. Develop your willpower with daily warm-ups and training and then quit smoking! Nicotine is a dangerous drug!!! Подставка для курительной…
simple Vaporesso XROS family stand Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.2 Infill: 20 Category: Tool Holders & Boxes
A minimalistic yet elegant stand for the Vaporesso ECO ONE vaping device. It features a hole so the battery LED indicator can be visible. Also, it has a relatively tight fit, meaning you can pick up the device and the stand remains…
Stand to stabilise my e-cig during charge print in PLA variable layer-high no support on prusa mini
This is a simple ring to keep the lid closed for my Vaporesso Armour S. I'm sure this will fit a lot of other tanks as well with similar issues of falling open due to a faulty latch design. The step file is a blank ring, the STL has…
3d printed gasket for vaporesso xros 3 vape
A Simple holder for ur Vaoresso Luxe. Has a small hole for a screw or u can use double sided Tape like i did. It has a hole for charging on the Bottom Setting: Support: Tree on buildplate only layer height: 0.28mm Infill: >15% Tested with…
A basic holder for your Vaporesso PT80s. The one I printed was too tight so I cut the hole open to fit mine. Feedback is appreciated
storage for pods and juice
Tired of your spare Luxe XR Max pod leaking all over your bag? I was too—especially when flying. That’s why I designed this compact pod case: it holds one pod perfectly and features a tight-fitting plug/cap that seals the draw hole. No…
Made myself a stand for my Vaporesso Revenger inlcuding two bottle slots for 10ml or bottles with the same diameter. May fit different Kits, see below. I imprinted the Vaporesso Logo, second version without. Printing instructions:…
A carry box to hold 2 Vaporesso Armour G / GS MTL / DTL pod (although I only have the DTL pod, but it should fit the MTL). I made the snap-in part a bit tight, so you will need to file down a bit to close it “smoothly”. You will need a M3…
This is an Sleeve for an Vaporesso Tarrot Nano Vaporizer. It gives an stable stand and has an gap for the USB-Chargingcabel Print instructions Category: Organization Summary This is an Sleeve for an Vaporesso Tarrot Nano Vaporizer. It…
Vaporesso Armor e-cig case
A Gridfinity stand for the Vaporestandssso Gen 80 S mod. I made the hole 0.25 bigger for ease of use.
A modified case for the XROS Pro vape device
A cover / cap for the Vaporesso Cascade One Plus Vape to prevent anything going in it while not in use.
TPU95-A Simple cylinder and disc that come together to create a cap for the DTL pod used with Vaporesso Luxe XR. This one perfectly fit my Vaporesso Luxe XR Max 2. It doesn't fit the MTL Luxe X pods. You can always scale down "X" and "Y"…
Make a tiny battery-powered smoke machine out of cheap vaping device. Fit the adapter around air intake ports of a vape and blow into it for the fog to come out of mouthpiece. Optionally attach a 12mm PVC or silicone pipe to the…
Printed with PLA top side down, supports in holes, no brim
The Vaporesso armour G/GS tank box features a compact and sleek design ideal for securely holding your vape tanks. The hinged lid with magnets ensures easy access and secure closure. Designed to store and protect Vaporesso tanks, this box…
Ein kleiner Ständer für die Vaporesso Zero S.
Vaporesso Xros 3 Nano SKADIS 0.20mm layer height Supports needed for pegs & LED cutout Best if printed in a upright orientation.
Cover for svapo Vaporesso GEN SE . Print it in TPU. No supports
Stand for a vape, pretty straightforward print. No supports. Will work for any vape that is roughly 24.6x14.5mm Prints fine in PLA, can be made very quickly due to simple geometry. I added 10 bottom layers and printed it at 10% gyroid…
Customized version of https://www.thingiverse.com/thing:3182024 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=3182024 Instructions Using the following options: Cone_Height = 50 Upper_Radius = 34…
I made this stand to hold my Vaporesso Eco One upright while charging or simply upright when not in use. There are two versions: the second version added two pod holders while charging. Print Settings Printer brand: Creality Printer:…
Basic Vaporesso Xros Pro Holder. Printed on CC, Standard Profile, 0,4mm nozzle.
My GF broke her plastic part on bottom of her E-cig, so i made New one. Proof that 3D printing makes sense (for GF/wife)!
Protection cap for Vaporesso XROS 5 Mini coil pod socket. Best printed with PETG at: 0.95 flow 230C slow (around 70% of typical speed or even slower) 0.10mm It allows to achieve smooth edges and best fit. UPD: added an o-ring (13x16)…
Vaporesso GTX GO 80Watt Holder
. its a box for vaporesso px80 i dont have other swag models may works for them my not 👍👍 . needs glue
A remix of the originals creators case, now with spikes so your vape is less convenient
Made @LudovicBourge_507795 model work for larger vapes. Used his model for the central console holder and remade entirely the support to accommodate larger vapes. Also added markings to make it easy to add threaded inserts.
I have designed this Vape Bed support with USB hole for my wife. It is compatible with Vaporesso Xross2 but i think can be optimized for most POD VAPES, because the base is detachable and dimensions are pretty editable for your needs…
This is a holder for a Vaporesso Gen 200 vape mod. It's compatible with the RAM-mount's diamond base, but the screw holes on the inside will need to be drilled with a countersink drill bit. Category: Other
The source marked this model as adult content.
Simple stand for vaporesso gen max
Description I have remixed a few files for my own uses but I thought id share this even though 0.001% on this planet might use it but here goes and me first published print. It holds the Target 100/200 in place where ever there is an air…
Adaptor for Gen Fit Vape which converts it to being blow-operated rather than suction-operated, for theatrical effects, street theatre, models etc. Fill with plain glycerin for safe smoke-generation without having to inhale anything! Also…
Holds up to 8 Vaporesso Armour G Pods. 4x MTL Mouthpiece 4x DTL Mouthpiece source files included. Feel free to rmx🙂
Designed for XROS pods with 11.7x22mm in the lower part of the tank that will fit into the holder, the wider shoulder being at least 10mm from the base of the pod. I use XROS CoreX 3.0, but 2.0 is the same size and may well be the same…
I wanted a way to charge up my XROS 5 Mini without having to fiddle around with the charging cable and use both hands. The ultimate in laziness, but why not? :o) This is a bit "niche", I admit. Only the Vaporesso XROS 5 Mini will fit in…
Magnetic vape holder with removable magnets. Perfect for making sure you never lose your vape again. I designed this after losing my vape constantly when in my home gym.
Engraved with the name NORMA, and an N. If you can make your own with your name and post it as a remix of this one!!
This is a simple ring to keep the lid closed for my Vaporesso Armour S. I'm sure this will fit a lot of other tanks as well with similar issues of falling open due to a faulty latch design. The step file is a blank ring, the STL has…
Stand vor Vaporesso Xros where you can hold your device, four Heads an Liquids
A nice and simply case/cover for Vaporesso Eco Nano Pro, should fit all other models, but it has the hole for the screen and the mode switch. It fit very tight and is very hard to remove without pushing from the bottom hole, you cannot…
The Vaporesso armour G/GS tank box features a compact and sleek design ideal for securely holding your vape tanks. The hinged lid with magnets ensures easy access and secure closure. Designed to store and protect Vaporesso tanks, this box…
TPU95-A Simple cylinder and disc that come together to create a cap for the DTL pod used with Vaporesso Luxe XR. This one perfectly fit my Vaporesso Luxe XR Max 2. It doesn't fit the MTL Luxe X pods. You can always scale down "X" and "Y"…
Vasporesso Xros 5 Stand- Device will stand upright or tilted back Scale Z Axis only if you want deeper chambers, do not change X or Y axis as the holes fit the device. Printed so that when charging, the screen faces backwards, flip…
Description I have remixed a few files for my own uses but I thought id share this even though 0.001% on this planet might use it but here goes and me first published print. It holds the Target 100/200 in place where ever there is an air…
A nice and simply case/cover for Vaporesso Eco Nano Pro, should fit all other models, but it has the hole for the screen and the mode switch. It fit very tight and is very hard to remove without pushing from the bottom hole, you cannot…
