Counting matching models…
This 3D-printable speaker adapter was designed to fit aftermarket speakers in a 2012 Vauxhall/Opel Vivaro (Vivaro A) camper conversion. I created it for a family member after being unable to source a suitable adapter in time for a planned…
Vaxee XE Wireless 3D Printed base. Stock weight of the mouse is 76g, with this base I was able to get it down to 67-69g. Model is not perfect but works great. Will continue to improve its fit. Let me know how it comes out!
For a better fit, immerse in hot water (70C+), then shape softened clip around your nose before it cools and hardens. Recommended Printing Parameters: PLA or PETG 0.15mm layers 20% infill No skirt or brim or raft No support Remixed from…
For some reasons IKEA does not sell the Vaxer net pots anymore where I live, so I've made my own direct replacement. Fits standard VAXER tubs. Print instructions These are designed to be printed upside down with no supports.
This base replaces the original one found on the NP-01S 4K in order to save up to 9g. Please keep in mind that the buttons on the bottom of the PCB are hard to reach after installation. Feel after installation is close to stock, but…
Germination seed tray with air holes. Seed tray have 15 holes. If it's too small for you, you can cut it and add more holes fits perfectly with mineral wool plugs !!!
This cover was made in attempt to reduce algae and other buildup around the plant and keep the system cleaner. The cap should just sit nicely over the cup with plant growing in the middle. Print instructions Category: Outdoor & Garden…
Fits the Vax OnePWR system. Use when drilling holes in walls to collect dust. Printed in PETG with supports, other materials should work. The base is has wide walls so 1 or 2mm neoprene can be stuck to it with double sided tape. The…
Replacement retaining clip to hold the water supply pipe to the metal tube and flexible hose on Vax wet and dry cleaners. These clips are not available to buy as single parts, only as part of a more expensive set including the pipe which…
This is a Replacement, Modified Dust/Dirt Container Lid Catch. For VAX Cordless Blade 3 or 4 Vacuums. (May fit other models) The original catch only has a bendable plastic return spring which broke on my VAX Blade 4, allowing the lid to…
full files: https://www.etsy.com/listing/1617263237/zs-v1-3d-printed-symmetric-wireless assembly instructions for full mouse: https://docs.google.com/document/d/1wGuOIPzPX49D86LDDstgmkd_BtqXz5dqIMgWrCX0H_k/edit twitter:…
Replacement clip to retain water tank on the carpet washer Vax Rapide Ultra 2. Will need supports, and to print so that layer lines create strength in the part. I printed in ABS to resist creep, and I was using tree supports. I'm sure…
The Fusion file was corrupted. The STEP I recovered to export should open but it's scuffed. Sorry. There is no soldering needed. I designed it to work with a triple A battery in lieu of having to solder a bit and using a different one.…
Hi, I've change source code of remixed part for: add my default part selector refactor to my oscad standard identation The functionality of the part is the same of Vaxxi's original one, but now you can select the pattern and options from…
Replacement nozzle for the Vax Spotwash carpet cleaner. Likely also compatible with the Vax Spotwash Platinum. Prints in 2 parts, connect them together with epoxy glue. Load them into your slicer in the default orientation and enable tree…
Recommended settings: Material: PET-G Layer height: 0,2mm Perimeters: 4 Infill: 15% Supports: YES Let me know how your print fits. :)
Le volant Nevax n'existe plus en pièce détachée … Je l'ai recréé en 2 pièces pour intégrer entre les 2 la partie laiton. Imprimé en PETG 0.2mm et les 2 pièces collées après mise en place de la partie laiton Utilisé sans soucis depuis qq…
I wanted to set up Vaxmyra LED Spots and change the angle it shines to. This is a mount to light things from below. Remove the bottom metal ring or remove the little plastic clip from the Vaxmyra to fit propperly. I printed the sample…
A simple and quick replacement clean water/chemical container screw cap for VAX carpet cleaners I made from 95shore TPU, but could be made in PETG or any other water resistant material. STL and BGcode provided. Prints inverted, no support…
Carpet washer cap. PETG - 15% infil gyroid for strength. If anyone wants to make something different - the thread it needs is - M38 x 4
I'd recommend printing with supports so the slot for the catch doesn't get malformed. Really up to you the other settings but I did this on 4 wall perimeters at 20% infill. Fit and clicked into place just fine.
The power cord retaining clip on my VAX steamer broke so I designed this replacement in onshape. So far it's working great. I would suggest printing with support for the overhangs and using at least four perimeters for strength. Layer…
its a design vase, insperd by ROVAXT ikea vase
The old DEC VAXstation VSXXX-AA mouse designed by Hawley used a XY tracking arrangement of two roller wheels with their axes canted at about a 10 degree angle, one for vertical and the other for horizontal. This not very popular design…
Recommended settings: Material: PET-G Layer height: 0,2mm Perimeters: 4 Infill: 15% Supports: YES Let me know how your print fits. :)
Vax Airstretch Attachment holder Ive designed an attachment holder that clips onto the fixed rigid upright pipe on the back of the Vacuum and then stops the attachment getting misplaced and lost (By my Mrs!!) I have included a model thats…
Nevax remplacement de la poignée du détendeur de chalumeau que ce soit oxygène ou acéthylène. La poignée est fragile mais n'existe plus au catalogue NEVAX … en 2 pièces pour intégrer la partie métallique en laiton à récupérer, puis…
Printable replacement for the orange twist retainers which hold various things to the Vax Rapide Ultra 2 carpet washer. I printed in ABS to resist creep over time. Use as many walls as needed so the central shaft part is solid.
Hoover clasp for Vax Multifunction Hoover. Part seems to be strongest when printed on it's side. Orange/Yellow parts are printed. Grey was original.
Trayvax has not added an AirTag adaptation for their OG or OG2.0 wallets like they have the newer wallet designs, so I decided to make my own. It laces in to the existing paracord and is held on strong. No worry about losing it, even when…
Recommended settings: Material: PET-G Layer height: 0,2mm Perimeters: 5 Infill: 15% Supports: YES Let me know how your print fits. :)
Thanks to the Underware 2.0 Customizer, I have adapted the mount for an FeinTech VAX01202.
The Palesheath Infiltrator scouts abandoned tissue vaults before the clade enters. Darker outer plates and a low stance help the scout move through broken laboratory infrastructure. Series: Vorrakai Frontiers Season: Season II: The…
This is a very simple way to restore functionality to the vax steam mop. It allows the switch to be latched “on” or “off” easily so that the mop can still be used after the badly designed handle breaks. Material: PETG Bed: Smooth PEI with…
After the original clip snapped on our steam mop, I quickly modelled up this replacement in Tinkercad years ago.
Model of Blind Side Sonny Bloggle from the latest Vaxis III arch. This can be printed with any settings you feel most comfortable with. I used the 0.20mm Standard @BBLX1C preset with my Bambu X1C but changed the Bottom surface pattern to…
Didn't realize that the Atom 500 doesn't come with a coldshoe mount, and I can't justify $20 each to buy them- so here we are. The mount is attached with two 3mm x 6mm screws, and is threaded for a 1/4"x20 standard tripod screw. I grabbed…
Adapter for the Henry Quick vacuum cleaner to connect to some Vax cylinder vacuum cleaner hoses and extensions, such as the Vax Air Compact. Print recommendations are to print larges face down. Two files “Bridge” and “No Bridge”. One has…
I created this for my Vax Air Reach. The roller was broken as the original bearing / end had worn down. I guessed what some parts looked like, but even if you print this in PLA i think it will be more hard wearing than the original as I…
Bracket to hold the upholstry brush and hose on a W86-DD-B carpet cleaner. Will reguire 2 X M3 bolts and nuts.
A badge to let people know your status Category: Coins & Badges
I have a bonsai area in the garden with white chippings size 10mm+ that get messy with small leaves and other debris. Normal vacuum nozzles just suck up the stones even if I set the Vax to minimum and open the tube vent, so I had to find…
This model replaces the discontinued Vax model 2000, or V2000 filter retaining ring. OEM Part# - 1863942 I printed this in PETG, with 4 perimeters for strength and it fits very nicely within the vacuum, holding the filter down firmly.
This is a very simple way to restore functionality to the vax steam mop. It allows the switch to be latched “on” or “off” easily so that the mop can still be used after the badly designed handle breaks. Material: PETG Bed: Smooth PEI with…
Hoover clasp for Vax Multifunction Hoover. Part seems to be strongest when printed on it's side. Orange/Yellow parts are printed. Grey was original.
During a deep clean of the brush bars I found that one of the caps had melted and gone off centre so decided to reproduce cap on second roller on the belt side. I'm new to model making so it isn't perfect but fits very snug on the central…
VAX Carpet Washer All Terrain V-125 original product: http://www.vax.co.uk/all-terrain-carpet-cleaner-and-washer The original hook broke, so created a replacement. Design very similar to the original, was manually drawn, measurements were…
For full instructions go here: https://github.com/jonn-reenthused/piVAX There are really only two bits that benefit from multi-colour/material - the wheels and the fascia. Both can be printed as it. The fascia has the digital logo, but if…
I drew the male vax adaptor in onshape which is my original part. I then married the 2 stls in Tinkercad adding shapes to smooth the transition. Handy for use in the car when your wife wont let you use her Dyson. Print upright with oval…
This is a strengthened version of MadebyCat's cable management hook for Vax steam mops. It provides a tighter fit and more strength. Printed in PETG, 15% infill, supports highly recommended.
I'm tired of hearing only about no vax and I'm also tired of wearing a mask, especially outdoors, my glasses always fog up with repetier host/server to print it in two colors add: G91 G1 Z10 G90 G1 X0 Y200 @info pausing @pause G91 G1 Z-10…
A common mistake that people make when trying to design something completely foolproof is to underestimate the ingenuity of complete fools. -Douglas Adams I managed to throw out the cyclonic filter for my Hoover vacuum while emptying the…
This is to connect a Vax vacuum to a Parkside Cordless Multi-Purpose Tool so I can collect some of the dust as I make it. The Vax is a Air Stretch Pet Max The Multi-Purpose tool is model number PAMFW 20-Li A1 I printed it in PLA+
Another version available on-line, but due to my uneven floor mats it kept breaking. So I designed my own.
During a deep clean of the brush bars I found that one of the caps had melted and gone off centre so decided to reproduce cap on second roller on the belt side. I'm new to model making so it isn't perfect but fits very snug on the central…
The fill cap on my Vax spot wash broke. Checked online and couldn't find a replacement or a model already made. Maybe this will come in handy for someone. Print in whatever filament you like, but I used ABS, 3 walls, 3 top and bottom, 30%…
I have a Vax Blade 4 PET, but I think the connection system is similar across other recent Vax vacuums as well. Measure yours if in doubt. Crevice tool The official crevice tool is both too short and too wide for those gaps next to the…
Replacement Vacuum Tube Release Clip for Vax Air Stretch (3D Printed) After years of moving my vacuum from job to job as a professional cleaner, the original tube release clip finally snapped. It's a common weak point, and without it the…
Made a stress relief for the Vaxee Outset AX gaming mouse. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: Doesn't Matter Supports: No Resolution: 0.2-0.1 Infill: 50-100% Filament: addnorth PLA Notes: Print on the flat side…
While visiting our local IKEA, I noticed they had nice LED lights which I could use to light up my printbed so the webcam image would not be all dark. The Vaxmyra "mirrors" have a left and a right side and should fit right in the…
repalcement part for my vax vacuum when the wheels wore through the base plate Category: Replacement Parts
My wife wanted a wall mounted holder for the spare battey for the Vax onepwr cordless vacuum cleaner.....so i designed one for her. The battery slides in easily and clicks into place so it can't be accidentally knocked off. Print Settings…
A variation of Irv's cable holder. I adjusted the table clamping widths. Only 7mm showing on the top and not angling the bottom table clamp, but sloping it for easier printing. I also shortened slots and added a groove to set the…
Adapter for a Vax VX93 cordless vacuum cleaner to use Dyson Cinetic Big Ball Origin accessories. Possibly compatible with other Dyson accessories too.
I designed this simple lid to put on top of and Ikea Daidai 9cm pot and to put the vaxer plant pots inside. It works well but it needs a bit of refinement for the magnets placement. After a few months of testing it turns out you don't…
This is a cover for IKEA hydroponics system named Vaxer. The original system doesn't have a cover for the water funnel. Funnel opening is small but I guess covering it will prevent contamination and light coming into the water pool (less…
My original HEPA filter gasket broke on my vacuum cleaner and it appears that the part is not available and you have to buy the whole filter. I printed this one in Ninjaflex and put it in the vacuum and it works like a treat Simple but…
This a screw in adapter for the Vivax brand AC. Mine came without the adapter for the outside unit, so here's one I modelled for it. Fits a bit loosely at scale 1, but it's good enough to hold the adapter in place even when the hose it…
Vacuum cleaner Vax mach air 3 bin knob, when original the broke. I used PETG
I saw a patch with this design on Reddit initially and decided to turn it into a 3D print. Here's the Etsy for the person that originally created the design. Swapping the filament with the PrusaSlicer M600 command is a breeze. I'd…
The old Vax brand cleaning solutions came with a 40ml dosing cap which was ok but still needed 4 capfuls per tankful of cleaning solution. Then I bought their Ultra+ 1.5L cleaning solution and discovered that the cap is only about 16ml,…
T e plastic of the original wheel break in several parts… VeryVery non quality plastic. I printed New wheels in ABS. You Can add sème glue to fix the wheel to the holder.
Cable hooks on the Vax steam cleaner are prone to break, rather than trying to find a replacement, I've 3D designed one. I tried many versions for the perfect fix and this deasign and size is perfect, I recommend priting in stronger…
I have lost bot of the caps for my VAX ECV1SPV1 Carpet Cleaner, so I designed new ones. Best to print it with PETG.
