758 models
When you wash your car with a bucket of soapy water, the dirt that comes off the car ends up in that bucket. This grit guard captures that dirt and keeps it from getting back on your sponge and scratching the paint. It was inspired by the…
Print approx. €4.27–€5.22 excl. taxPreliminary estimate for one variant
Hello, Welcome to my profile, full of models and miniatures :-) I have a stand for you, a holder for Playstation 5, PS5 games. The games fit beautifully and the logo is compatible with the original. There are many improvements in this…
Print approx. €0.12–€0.15 excl. taxPreliminary estimate for one variant
Description Description The Precise Support for Seiko NH3*, NH7* or 4R3* movements offers exceptional precision in dial placement whether the crown is at 3, 3.8 or 4.1 o'clock. Printing Instructions: Recommended Settings: Use a layer…
Print approx. €0.81–€0.99 excl. taxPreliminary estimate for one variant
This is a great model by @RoccosStuff. In some of his earlier models he used the spare metal pins for the lock bolts but chose to use 3d printed pins on this. I think the metal pins looks better and it is easier to print the rack that way…
Print approx. €0.31–€0.38 excl. taxPreliminary estimate for one variant
Jeep Badge Replacement for “Pavement Princesses” Designed to be color changeable at different layer heights for different colored: Background Outside Ring Mountains Text Printed at .15 layer height, but I'm sure .2 would work.
These are the 3 movement templates needed for playing Starwars Legion. If you want to try before you begin investing in this game. Each requires a top, bottom and a screw fastener to hold them together. These are a part of a set of lego…
Print approx. €1.58–€1.93 excl. taxPreliminary estimate for one variant
This version of the top plate increases the space to pass swatches in the top plate and moves the position of the top open yarn hole. The old position caused the yarn to get hooked onto the wheel screws if the tension was a little lower.…
Print approx. €0.09–€0.11 excl. taxPreliminary estimate for one variant
@LesKaye ‘s watering can is phenomenal. The rose? Not so much. I was gifting the set to a friend and found the rose performance unacceptable. So, I set about tweaking it. After a quick volumetric flow rate analysis and a few prototypes, I…
Print approx. €2.03–€2.48 excl. taxPreliminary estimate for PETGSource material: PET
By my opinion raft-only (sheltie-raft only.stl) version is tough enough, choice is yours. Verze bez střední kruhové výstuže se mi zdá dostatečně pevná sama o sobě. Printed with PLA (0.2) Infill doesn't matter, 10% - 15%
Print approx. €0.63–€0.77 excl. taxPreliminary estimate for one variant
True Fruits Trichter für die 750ml Flasche gedruckt mit 15 Prozent infill und der 0,4 hf nozzle gedruckt. über likes makes und follower würde ich mich sehr freuen, Peace MazZe
Print approx. €5.05–€6.18 excl. taxPreliminary estimate for one variant
Inspired by: https://inevitablecraftslab.wordpress.com/2020/06/06/veml7700-photographic-lightmeter/ Dis/Assembly Video Why would you make this? If you have old manual SLR or TLR cameras with no built-in light meter (or a non-functional…
Print approx. €1.79–€2.19 excl. taxPreliminary estimate for PETGSource material: PET
The cleaner attaches directly to your pool pump so it has good suction. However, as there is only one hole in the middle, it cleans only about 5 cm in with… with the rest you just make the dirt come up and dispense into the water. Print…
Print approx. €1.89–€2.31 excl. taxPreliminary estimate for one variant
EN : A model of dog tag lightning with the name of your super hero pet engraved inside and also your phone number to be sure that someone find your dog who's saving lives in solo, a gentle human could ring your phone if your pet he's lost…
Print approx. €0.33–€0.41 excl. taxPreliminary estimate for PETGSource material: PET
Remix of existing model by TC . Arrows extruded from main body in order to support layer colour change in PrusaSlicer for non-mmu colour changes. G-code files have supports and colour change enabled. Matching Z-Axis model is here →…
Print approx. €0.10–€0.13 excl. taxPreliminary estimate for PETGSource material: PET
Simple watch movement holder. Specifically it is designed for the Casio G-Shock GA2100 or other similar sized movement.
Print approx. €0.75–€0.92 excl. taxPreliminary estimate for one variant
Remix of existing model by TC . Arrows extruded from main body in order to support layer colour change in PrusaSlicer for non-mmu colour changes. G-code files have supports, colour change enabled and 2 objects. Matching X-Axis model is…
Print approx. €0.09–€0.11 excl. taxPreliminary estimate for PETGSource material: PET
Mechanism to precisely synchronize the rotation of the prisms of a ZWO ADC. Solution to facilitate the use of the ZWO ADC, paying full attention to the capture monitor during centering. To incorporate the mechanism into the ZWO ADC, only…
FR Support plafond ou mural pour capteur AQARA P1 (détecteur de mouvement et luminosité). Conseils de paramétrage d'impression: PETG 3 périmètres Infill : 15% Sans support Pièce à imprimer sur la face plane (bonne stabilité) EN Aqara P1…
Print approx. €0.70–€0.85 excl. taxPreliminary estimate for PETGSource material: PET
True Fruits Trichter für die 99ml 250ml Flasche mit 15 Prozent infill und mit der 0.4 hf Nozzle gedruckt. über likes makes und follower würde ich mich sehr freuen, Peace MazZe
Designed by my 9-year-old daughter as a major cuteness upgrade to the admittedly grumpy OctoBot ! The babies, mamas and daddies can go on countless adventures in the hands of creative kids, or happily provide clicky fun for fidgeters of…
Print approx. €0.16–€0.19 excl. taxPreliminary estimate for one variant
Die Vase ist 20cm hoch und wurde mit 15 % infill gedruckt mit einer 0,8 Nozzle habe sie aber auch mit einer 0,4 Nozzle gedruckt dies dauert aber sehr viel länger. über likes makes und follower würde ich mich sehr freuen, Peace MazZe…
Print approx. €6.09–€7.45 excl. taxPreliminary estimate for one variant
This adaptation allows to regulate a clip of workbench without wrenches. It is enough to weaken the top nut and to adjust the necessary effort of a clip, then to clamp the top nut. It is possible to use any firm plastic, such as PLA or…
Print approx. €0.59–€0.72 excl. taxPreliminary estimate for one variant
This movement gauge has a 3inch, 2inch and 1inch side, a large hole for easy manipulation around the game board. Print a few and hand them out at your next event
Print approx. €0.44–€0.53 excl. taxPreliminary estimate for PETGSource material: PET
Hi I created this remix from the original framework mainboard to adapt a additional way to cool the mainboard. As I like the implementation of a Display I implemented on In the bottom. This also creates space for a controller to monitor…
Print approx. €2.22–€2.71 excl. taxPreliminary estimate for one variant
I created the inverter/sound directional adapters (not really sure what to call it) to improve the sound quality when having my HP P34hc G4 monitor standing in an open area without a wall behind. Can be attached with glue our double-sided…
Print approx. €2.20–€2.69 excl. taxPreliminary estimate for PETGSource material: PET
I printed the Small Parts Cabinet and top tray, and wanted to place my movement holder securely on top.
Print approx. €2.43–€2.98 excl. taxPreliminary estimate for one variant
A design i made a few months ago. Enjoy!
So I just received my new Sunlu S2 Filament Dryer and it had the chance to be better than my current favourite, the Eibos Easydry. It gets hotter internally and heats evenly from all sides. There are however two major design flaws that…
I added holes to allow fixing this Zipper Slider Jig with clamp . Clamp can be used on the sides, front or back
The arm file is a 3mf that modifies the arm joint by adding a negative sphere body to make it attach better to the torso. You will need a slicer like PrusaSlicer that supports this. I've also attached a head and face insert that may need…
I have modeled these movement trays to be simple, easy to print, and compact. There are options for 25, 28, 32mm, and 40mm bases in a few different shapes with 3, 5, and 10 model tray sizes. I been printing them at .32mm layer height…
For a lot of helpful details/info please consult the main Teaching Tech listing here: https://www.printables.com/model/864950-open-source-spacemouse-space-mushroom-remix This final assembly video explains all about my remixes in this set:…
Spoiler: I have not created 507 models; the name refers to the book “507 Mechanical Movements” by Henry T. Brown from 1868. The book is also available as an online version with animations. You should definitely take a look at it. Such…
This design optimization is for people who has cooling efficiency problem with his S1 and you don't want to add any weight to this super heavy Sprite thing. Since I found that the S1 has more stringing than the V2 has. I made some…
Lots of little changes for a better print! See below for a list of edits. Includes a 3MF file for Bambu Studio. The arms have a ball and socket and can be posed in lots of directions. Arms and one-piece skull print with supports.…
Simple pavement stamp printable on the MSLA printer. See more at: https://blog.prusaprinters.org/3d-printed-railway-models-part-iii-the-final-model/ If you like my models, don't forget to Support me in more creations!
https://makerworld.com/es/models/1147638-old-world-base-adapters-and-movement-trays Review New Size Movement Trays 30x60mm 4x1 (120mm x 60mm) Movement Trays 25x25mm 4x3 Movement Trays 25x25mm 8x5 Movement Trays 25x25mm 5x5 Movement Trays…
***Update - A second pair of platform and attachment models have been uploaded; these allow for better holding of smaller diameter movements. *** This movement holder is based on the classic Slick-style holders now produced by watchmaking…
Mechanical Movement 123 What is it? -This is a device that is designed to turn rotary motion into linear motion. It does this by having to drive gears engage with the rack at opposite times, in turn pulling the rack back and forth. The…
To view updated version of this model please click here. There are three ways to print this. As single piece :- Please download STL file but there wont be any movements. Multiple Pieces :- Download 3mf file with Full_dismantled.3mf. BEST…
The Multi-Mission Recovery System (MMRS) is a powerful vehicle designed to retrieve and repair disabled military vehicles in challenging environments. It boasts a 360-degree rotating boom with a 41-foot reach and impressive lifting…
Movement holder for Seiko NH series of movements
This is a 2-piece barrel closing tool consisting of a lid and a base. Although fairly easily machined on a lathe, I figured 3D-printing a barrel closer might be useful for some watchmakers/watch repairers. The design of this tool is…
Check out the Premium version of this model at 1:24 scale with the following features Full Front Loader Functions: Engage in realistic loading and lifting operations. Auto-Locking Joints : Ensure secure and reliable operation of the front…
A snowcat/snow groomer is a large vehicle mainly used to pack snow and improve conditions for skiing, snowboarding, and snowmobile trails. Apart from these functions, it can also be modified to fit exploration and other niches I am very…
Hanna Barbera Captain Caveman. with or without base.
This is a full set of all the templates for movements, weapons and dropped weapons you will need to play Gaslands. These are accurate to the book templates, with a new easier to read style. Plus it allows for two color printing with a…
The Stand is inspired by the 165$ stand made by Grovemade. (https://grovemade.com/product/magsafe-stand/?initial=642) Printing Instructions It was designed and split in 3 pieces for an easy print. You can print this stand with pretty much…
The original model looks great, but I found it to not move as freely as I would like, although this could be due to my printer settings. Even replacing the printed parts with screws doesn't eliminate it entirely as I could not tighten the…
This is an easy-to-print platform for supporting the balance wheel during a watch service. It is similar to Bergeon item #7990 “Support for Cleaning the Impulse Pin”. In addition to allowing for cleaning of the roller jewel, it makes a…
This movement spacer allows a VH31 movement to fit within the most common NH35 cases. The files are upside-down, so please flip them over in the slicer before printing :) The movement spacer also has holes for NH35 dial feet, so you do…
Two versions of a book bookmark with a tree motif - short and long. Dvě verze záložky do knihy s motivem stromu.
Welcome to GlennovitS3D. Join the Club on Printables.com to support creation of new models , get access to exclusive models , and get commercial rights, to sell prints. Join today - GlennovitS3D - or check out my model collection or my…
Fun ghost, review of various models sent by other users. Insert the spring into the ghost head. Glue if needed. Attach the base. Optional: Add glue.
There are three ways to print this. As single piece :- Please download STL file but there wont be any movements. Multiple Pieces :- Download 3mf file with Full_dismantled.3mf. BEST QUALITY OUTPUT . Please use the 3mf file for assembly…
Movement Trays for Warhammer Fantasy Battles or other wargames. I had already published the 100x40 independently but I group all of them here for ease of access. 80x40 : 2 rows of 4 infantry 80x60 : 3 rows of 4 infantry 100x20 : 1 row of…
New version (central gear is hidden behind the front panel) is published here . A clock with a perpetual calendar mechanism that correctly handles all types of months, including February in a leap year, has been developed. Despite the…
Wanted a smaller engine so I made this remix of the V8 engine. Movable, tight fit but it works. A couple of minutes of movement and it goes smoother! Printed with 0.2 resolution and 10 % gyroid infill.
There are three ways to print this. As single piece :- Please download STL file but there wont be any movements. Multiple Pieces :- Download 3mf file with Full_dismantled.3mf. BEST QUALITY OUTPUT . Please use the 3mf file for assembly…
Remix from https://www.printables.com/de/model/446313-dji-mini-3-pro-rugged-box-and-insert Issue: broken hinges
I wanted to be able to print more than just 2 at a time. Specially over the night when everyone is sleeping. I came up with the idea to stack them on top of each other. Instead of 2 you could print 8 during night. If your printer has…
Screen to improve ventilation of the mini PC case. PETG. Layer 0.2. Infill doesn't matter.
Upgrades From Version 1 The Body Panels are seperated. The Roof is seperated. Seats and Light seperated Interference issues corrected. Other Minute structural changes. There are three ways to print this. As single piece :- Please download…
Thanks to Martin Schneider for his great design of the Original Open Press Project. https://www.thingiverse.com/thing:2841592 and https://openpressproject.com/ Thank you to Hefrimu who created a load of improvement to form the Open Art…
There are three ways to print this. As single piece :- Please download STL file but there wont be any movements. Multiple Pieces :- Download 3mf file with Full_dismantled.3mf. BEST QUALITY OUTPUT . Please use the 3mf file for assembly…
I got a shirt that inspired me to make this sign. There are 4 versions, some with letters protruding, some with letters cutout, some with mounting holes, and some without mounting holes.
Fairly self explanatory. Update 21 july 2018: Added a 10man version at the request of user big_jack Update 21 july 2018: Added a second blob version of the 10man version at the request of user big_jack Category: Toy & Game Accessories
Introduction I love this design. It's great, but I had some issues I needed to address. Thank you to GunplaMark for making my life easy by publishing the STEP files. I've made a number of changes from the original design: The original…
This is an excellent improvement to cable management by pekcitron Go to his webpage for description and pictures https://www.thingiverse.com/thing:4065410 Print instructions Printer: Prusa Model: Mk3S Rafts: No Supports: No Resolution:…
This is a remix of the main picker part where an unwanted gap is removed / corrected and also some useful rounding corners added. One of these eliminates the need of supports there. I was printing this interesting design and discovered a…
18.05.2025: OBSOLETE! Successor model IAF Idler (Install and Forget) can be found here: https://www.printables.com/model/1269218-nextruder-mmu-multi-material-gamechanger-iaf-idler After many failed prints in which the extruder stops…
I wanted a movement holder for my Seiko watch modding, which would sit steady when fitting hands and carrying out other work. The holder is designed to have a very small lip. making it suitable for placing movements in upside down with…
To view updated version of this model please click here. There are three ways to print this. ***As single piece:- Please download yellow_excavator_combined STL or 3mf ***As five pieces :- Please download yellow_excavator.3mf file. There…
There are three ways to print this. As single piece :- Please download STL file but there wont be any movements. Multiple Pieces :- Download 3mf file with Full_dismantled.3mf. BEST QUALITY OUTPUT . Please use the 3mf file for assembly…
These macros are designed to enhance the Flsun T1 Pro printing experience by improving temperature handling, automating bed mesh calibration, and providing clear on-screen and console feedback throughout the print process. Changelog:…
This is a old school type of fire engine based on the Yellow Zil Truck Chassis model that I have released earlier. In that release itself I have explained how it is the universal platform on which various payloads can be added for…
Hi A small improvement concerning the adjustment screws of the Z axis of the laser, indeed I find the original screws difficult to handle. Simply snap in the originals screws into the printed parts I have also designed an adjustment screw…
This is an old school type of fire engine based on the Yellow Artillery Tractor Chassis model that I have released earlier. In that release itself I have explained how it is the universal platform on which various payloads can be added…
Add-ons for the V6 engine. Original:
Suitable for printing with any filament at any detail level without supports. the numbers are recessed for ease of painting of multi filament printing.
These trays were designed for the Grovemade Desk Shelf System. There are 2 sizes currently: Small: 1.5" tall x 4.25" wide x 8.75" deep Medium: 1.5" tall x 8.625" wide x 8.75" deep (Coming Soon) The TPU insert makes the tray feel premium…
For all awesome photos, makes, reviews and more visit original source links. DaveMakesStuff description on thangs.com: “Hey, if you’re in the neighbourhood drop by for a… CUP OF TEETH!!!! WHOA HA HA HA!” Teeth cup and saucer are linked in…
A 60' version of an articulated D&D movement ruler, 1"= 5'. You may need to mirror the .stl on the X-axis, depending on your printer. This is a thinner version of model…
Simple model made in tinkercad, can be resized with some trail and error. Made so i can play some 9th age with me bois after 40k got too anoying. I printed it with some crappy PLA and 0,3mm layer hight, wouldn't invest any more in it.
Upgrades From Version 1 The body panels with grey colors can be now printed seperately and then joined with main body thus the distinct color combination can be achieved without painting. The back panel engine cover is now operated with a…
Paul's MMU3 Cassette Compatible Buffer is an amazing model to replace the buffer that comes with the MMU3 unit. There were two issues I had with the original model that my adjustments aim to improve upon: The L bracket in the original did…
Instead of using mechanical movements for watch builds, I wanted to use quartz movements like the Seiko VH31 and Miyota 2115. Since both quartz movements are similar is size and shape, this casing ring will fit both of them. I designed…
This is a complete re-build of the laundry detergent lever by PeaRidgeHillbilly. I think that the little button on the top of the laundry jugs spouts are hard to push, and this idea was great. Many have arthritis, and find ordinary items…
There are three ways to print this. As single piece :- Please download STL file but there wont be any movements. Multiple Pieces :- Download 3mf file with Full_dismantled.3mf. BEST QUALITY OUTPUT . Please use the 3mf file for assembly…
When Ogg (my YouTube caveman muppet ) dresses to impress, he feels naked without his trusty spear at his side. But where is a caveman awakened in the modern world going to find a spear? He's going to 3D print one, of course. But he's also…
These movement trays are for the models included in the The Old World Tomb Kings of Khemri Edition Army Core Set. But you can use them for other models. They will fit: • 25mm square based models in 4 ranks of 5 models (spearmen) • 25mm…
Print profile : 0,12 mm 3 walls Top/bottom layers : 5 Infill : 10% Gyroid Supports : yes
This is a few improvements I made for mmsaxer1998's excellent adapters for the Nikon Super Coolscans. The first is a support for the rear spool that screws into the back of the scanner. Created this because I keep having issues with it…
UPDATE 2023-12-06: There was a slight measurement error in the base notch spacing of many of the originally uploaded models. I replaced them all with corrected files. If you downloaded and printed the old designs, they will still work,…
Guard to protect the fish from the SLW-30 Wavemaker pump
This remix addresses several problems that I experienced: When filament is stored in the box and the box is rotated during handling the filament tip occasionally gets yanked from the plug. The solution is to split ends of the plug and add…
The Better Blade OTF Knife is my take on a popular OTF design. I've made significant changes to make this print more reliability and added a lot more availability for customization. Stay tuned for more blade designs and handle designs!
Just buy the real thing: Bricks: https://www.greenstuffworld.com/en/acrylic-molds/3271-acrylic-molds-bricks.html Old bricks: https://www.greenstuffworld.com/en/acrylic-molds/3272-acrylic-molds-old-bricks.html Trihex paver:…
[CATMAN TV] an ultralight (20gram) cellphone hanger for your tent! simply hang this from your tent ceiling and gently hug your phone in. the two legs of paracord must be further away diagonally then the central axis in order for the…
This is a movement holder/casing ring for the Miyota 2035 (not 2305) quartz movement so it can be adapted for a case for Seiko NH series of mechanical watches. Great for mechnical to quartz conversions or for anyone looking to build a…
