Counting matching models…
V2 IS HERE: https://www.printables.com/model/1152427-openvessel-20-a-practical-3d-printing-benchmark Introducing OpenVessel , a model designed from scratch to embody the true spirit of 3D printing: freedom, openness, and community.…
A truly extraordinary decorative object. A moon with a small bowl attached for flowers and decorations. Standard size: 230x230x90mm. Easily scalable smaller or larger if required. A truly extraordinary decorative object. A moon with a…
About: Want to attach your existing gridfinity bins to your new multiboard wall or just use the existing containers you already printed? This is just the right solution for you. Just download some multiboard connector , connect it to your…
Designer-Esque fully 3D-printable Vasemode Lamp Design The Lampshade and the base thread into each other for a seamless and sturdy appearance. Although it is designed to fit the Bambu Labs “LED Lamp Kit” you can easily modify the Base to…
This project is a fully functional V8 engine model designed for 3D printing. It features: Moving crankshaft, pistons, timing chain, and two valves per cylinder, standard firing order: 1-8-4-3-6-5-7-2, Fully printable timing chain, Can be…
All props to Pattersaurus on Thingiverse for this. * You'll need THREE M3 x 8mm Screws / Bolts (no nuts) to attach this to your machine. * ****PRINT ORIENTATION**** - fins and holes face down on plate: Just as the first photo, place it on…
Remix to remove the top half of the back honeycomb to give a 'floating' look and to double the stability while hiding the nails better Print one frame piece and two side grills (Preferably in an accent color) Don't forget to resize the…
Large metric 16cm version of the Mushroom Shelves. Scale to your liking. The newly designed bracket is printed in place (upside-down) and will scale with the individual shelf model. Design #5 and #6 have been added in this remix Update!…
OpenVessel 2.0 is a redesigned benchmark model for testing your 3D printer’s capabilities. The original was scrapped to make this version unique and functional without resembling Benchy. It’s simple, effective, and even floats upright in…
AirTags are a great way to keep track of your valuables, especially while traveling. An AirTag thrown in your suitcase, or hanging from the handle of your bag will provide some peace of mind, and make it easy to recover misplaced luggage,…
Sylvester James Pussycat, Sr. is a fictional character, an anthropomorphic tuxedo cat in the Looney Tunes and Merrie Melodies series of cartoons. Sylvester appeared in 103 cartoons and most of his appearances have him often chasing…
Shelf for Skadis board. Designed in 3 parts so you can easily use different colors. Short Shelf spans across 3 pegs and long shelf spans across 5 pegs. Pictures show stained wood PLA and black PLA.
Basic, tilt-able VESA mount 100x100 and 75x75 200mm and 300mm tall options. Hardware: 1 x ¼-20 x 2" 1 x 10-24 x 1.5" 4 x m4 x 10mm+ depends on monitor Update 07/01/2026: added 300mm arm.
Print-in-place and Articulated Surprise Egg #11 - Tiny Harvester 'Making of' video: https://youtu.be/szbpNGrIUOU The harvester and the egg was each designed to be printed in place without any need for support structures. The harvester…
We have created a new base for the stem, with nice leaves. The stem is simply printed upright and can be printed perfectly, even the small one (like shown on the photo). Printing should be done slowly (about 45 mm/sec. *) and, if…
The original Scan (Atos Core 3D Scan) made by the Mammal Research Institute, Polish Academy of Science during the Open Forest Data project . You can download the original data here . I adapted the scan for 3D printing. The mandible is…
Česká verze Detailní 3D tištěný model Mezinárodní vesmírné stanice ISS v měřítku 1:100. Vhodný pro fanoušky kosmonautiky, modelářství a vědeckých dekorací. English A detailed 3D-printable 1:100 scale model of the International Space…
Version 2 now availiable!: https://www.printables.com/model/254313-finger-surfboard-car-window-finger-surfboard-flybo Have you ever put your arm out of you car window when driving fast in order to ride the waves? Now, you can take your…
A modern approach to the wavy style plant pots with the use of parametric settings. Print information: Recommended vase mode or semi-vasemode settings (0% infill, 0 top layers, 4 or 5 bottom layers, 2 or 3 outer perimeters - for a…
Set of 5 different style Shelves for Honeycomb Storage wall. Shelves are 100-120mm wide and 50-60mm deep. Made specially for HSW or Honeycomb Storage wall with Hex wall fixings. Depending on Your printer it is possible that a very little…
Height is specified in the print file title. The shelves interlock, as shown. 3in and 6in tall shelves are shown. cabinet is 20.5" wide. Shelves allow for storage underneath them for duplicate spices or anything really. Feel free to…
Statue of Dr. Smolder Bravestone / Dwayne (The Rock) Johnson from Jumanji: Welcome to the Jungle. I tried to capture every detail and that's why it's probably my shortest project in one piece. Specially designed for the Prusaprinters…
I needed a monitor arm to attach to my Raising Electronics server rack frame and couldn't find anything purpose built so I hope this helps someone looking to do the same. I started with this make from stunner2211 over at thingiverse and…
In the print settings tab select “ Spiral Vase mode”. A little over-extrusion width (e.g. 0.6 mm for 0.4 nozzle) does not hurt, then it is more stable.
display all your bits and bops on these shelves - 15 x 5 cm shelves
Why: I have a lot of troubles with getting all the parts needed for making this engine. Moreover, some parts just does not work very well, causing mechanism destruction. I'm sharing modified parts that allowed me finishing that project.…
Create a stylish and functional display with our 3D-printable hexagon shelves. These modular shelves feature built-in LED lighting for an eye-catching effect. The cable management system ensures a clean and organized look, allowing you to…
(Update 4/12/2019) Uploaded IGES model files for easier remix. A quick snap-on case for this HDMI LCD module with capacitive touch screen and auto scaling to accept up to 1920x1080 input resolution. Waveshare 7inch HDMI LCD (H) Mount…
Honeycomb Shelves with easy hang center hole. three sizes to download. Easily scalable to desired size. Small: 122mmx137mmx45mm Medium: 183mm x 206mm x 67mm Large: 244mm x 275mm x 90mm Pictured are mediums printed in Prusa black PLA.
Prints as 2 separate pieces that press-fit together. Take note of which base to use. One of them has a slot for a gift card and the other does not. The assembled height is about 10.5cm (4") tall. The base is 4cmx4cm or 1.5"x1.5" The…
This bookmark features the leaves and flowers of the tradescantia , which is also known as the wandering jewel, inchplant, or dayflower. (I think it's probably tradescantia zebrina .) I originally designed this as a gift for my friend ,…
Attach the baseplate using simple 2-sided tape. The weight of the drives will keep it secure during normal use. Support: If you REALLY like this model and want to buy me a beer, you can find me here. Whether it’s feedback or just a nod of…
This project is a fully functional V6 engine model designed for 3D printing. It features: Moving crankshaft, pistons, timing chain, and two valves per cylinder, standard firing order: 1-2-3-4-5-6, Fully printable timing chain, Can be…
Learn how positional vertigo works by watching the crystals (aka "otoconia" or "otolith") fall and move through the semicircular canals of your inner ear anatomy with this educational model. We developed this anatomical model to promote…
I really liked Shotime369 's mushroom shelf I cleaned up the geometry and made a few sizes (S, M, L) and mirrored versions for all three. The large size should just fit on an Ender / MK3 bed. No supports needed (really). Enjoy.
[update] I added a new version “trayStackerShort” which doesn't extend as deep into the tray. This is useful when freezing liquids so the stackers don't get stuck and it prints faster.[/update] These have been confirmed to fit trays for…
Allows you to take a small monitor or graphics display tablet e.g. Wacom Cintiq 16 off of a standard monitor arm and put it back without needing a screwdriver or precise alignment of the mounts due to the self-aligning dovetails. You'll…
Info: decorative organic leaves collection can be bent when heated (hair dryer for example) to look more realistic Print info: 0.2mm layer height no supports be sure to have perfect 1st layer but some bad 1st layer can also create…
(Update 4/12/2019) Uploaded IGES model files for easier remix. A quick snap-on case for this HDMI LCD module with capacitive touch screen. Waveshare 7inch HDMI LCD (C) ) Mount options: My desktop mounts (45-degree / 60-degree) with Pi…
Owl Vessel Print with at least 4 perimeters if it is going to hold water. I would also anneal it in a pre-heated oven at 120 or so for about an hour. Added owlvase2 (2/10/10) there was a tiny hole in the bottom of removed model.
Update 24.06.2026 Released the F3D and STEP files of the entire assembly Added a compact backplate (50mm wide) 1. Introduction I needed a sturdy and reliable design to remove the Monitor stand from a 24"-ish Monitor, intended for use in a…
Overview OpenSCAD project to create a cage that fits in 3 5.25" drive bays and holds 4 3.5" hard drives using rails. Optionally supports a fan shroud to provide additional airflow to the drives. You need to print: 1 cage-cage.stl 8…
8 sizes of display shelves for your Honeycomb Storage Wall. The clip mechanism is fairly tight, I do not suggest you use high stiffness filaments such as ABS-GF, and for the bigger shelves, it's probably not a good idea to use low…
Pulled from the game Sea of Thieves and repaired for printing.
Bust of Dr. Bravestone - Dunson Johnson I made two bases No. 1 is ordinary and No. 2 is a bit decorated ;) Print instructions The bases are printable without supports For the bust, I recommend earbuds, but they are probably not necessary
This geometry was designed to fit a leftover socket, which was missing a lampshade. It might fit other lamp sockets as well. If you intend to use the geometry as a vase, there is also a version with a mounting hole included. Geometry was…
Assembly: Put some CA glue (super glue) in the holes and insert the pegs. I recommend gel super glue. 40, 60, and 80% scale use a single peg, so they're decorative only. Use “peg_short” for these. 100–200% scale use two pegs, and can…
Model Vespa 150 Super (1965) It's not exactly scale model but is optimised for easy print with no supports. It is better to glue the pins, but it is not necessary. Printer setup: Nozzle diameter 0,4 Layer height 0.20mm 10-20% infill No…
There are these useful gadgets you can purchase from the hardware store to keep your work gloves with you when you are not wearing them. Typically, a small clip that attaches to your belt loop and a larger clip that attaches to your…
You shoul use a 4 M3x10 screws to secure a screen to the case.
Are you feeling overwhelmed by your monitor taking up too much space on your desk? It's time to take a stand and reclaim your workspace with this French cleat, low profile monitor wall mount. This mount is designed to be both strong and…
I remixed these for my nephew, who is a marvel fan but just 4 years old. The original hands are way to big for him so I made them 75% size of the original (opening of the wrist is 75mm) and added a handle bar inside the glove so he can…
A desk tidy with slightly angled shelves and two spots on the bottom to attach to a desk with 25mm VHB tape (0.6mm indents). Print on its back (Hex side). I recommend 3D honeycomb fill with 10% infill and 3 walls/top/bottom. No supports…
Will make adjustments per request
The TerraPi Xtreme DUO is an open Raspberry Pi NAS case, featuring two HDD 3.5" slots . A set of USB3 to SATA external power adapters are required to connect the drives to the Pi. You can buy those from your local market, to ensure that…
Halloween Cookie Biscuit Gingerbread Cutter (approx 45-50 mm) You can change scale in the Fusion 360 File in Parameters Table, for make the cutters bigger (X and Y axis), without to increase the wall thickness. (See attached picture with…
A standalone design that beautifully complements the design of the thorny rose stem, but could also go well with other flowers. The sheets are simply printed flat on the print bed, also with a colour change. The twist of the matter is…
Are you tired of major internet celebrities like me telling you what your Dummy's kit should be? Do you think that freedom means you should be able to choose it yourself? This, then, is your solution; the Dummy 13 Modular Plate Carrier.…
This is a keychain for two loved ones. It clicks into place like a puzzle. The model has a 0.20 mm tolerance. I printed it in two color PLA, 0.20 mm height and 10-15% infill. I've uploaded the fusion 360 files so you can add text on top…
These are Tamiya Paint Holders for use on IKEA Skadis pegboard. Skadis_Tamiya_2 and Skadis_Tamiya_4 are for the Mini 10ml bottles. Just added 23ml version, this is too big, cup inner diameter is 45mm.... v2 added, which should be inner…
This is a remix of the Sea of Thieves Megalodon by mordekain . I smoothed out a lot of the model to remove the semi-low poly look of the original and split it into pieces for easier printing. A very minimal amount of supports are needed…
My wife needed a way to securely hold her Airwrap attachments and wasn't finding anything she liked here or for purchase so I designed and printed these. I hope they work for everyone. I printed the shelf with the hooks on it's back with…
My airsoft vest is great for me, but storing it is quite a pain because you can't really just hang it somewhere on a normal coat hanger or lay it flat without it taking up a huge space. So I took to the drawing board and made the TVH…
DEADPOOL SCOOTER - VESPA PRIMAVERA SCALE 1:12 If you want this as a multi piece thing you can get it here: https://cults3d.com/en/3d-model/game/deadpool-scooter-vespa-primavera If you have any questions, let me know in the comments. You…
It is a very simple but durable screen mount in sizes 100x100 and 75x75 mm. In the wall mount (female) the hole spacing is 46x56mm. The diameter of all the holes is 5mm. I've printed this out from PET and I've been using it for almost a…
Summary: This is a variation of the HP Omen to VESA adapter provided by Technius with added gussets and tapering for strength. Two STLs provided: HP Omen monitor (slightly modified from original) HP M27FQ monitor (heavily modified from…
New: I made a new version of all 12 shelves with a back with Bolt Holes for the Large Multiboard Bolts. I use the 9mm Flat Head . You can use longer if you have your tiles spaced from the wall. These will hold a lot more weight then the…
I wanted a holder for at least 12 USB drives with a few SD and MicroSD slots and it should be in a tall/vertical tower design. This holder has a small cavity for a 10g balancing weight (those lead weights with a self adhesive side for…
These are 3D printable glove adapters that you can use for your projects that will allow you to add a hole for your hands/gloves to be screwed in place. No supports required and you should be able to rescale these larger or smaller as…
Armas personalizadas con el rostro de personajes de películas de terror Category: People
In the print settings tab select “ Spiral Vase mode”. A little over-extrusion width (e.g. 0.6 mm for 0.4 nozzle) does not hurt, then it is more stable. The files were provided by Lucretia @bergfex55_505553 in order to be able to present…
Here is the Model for my Barrel that I made after being inspired by playing Sea of Thieves there is the option of either a standard lid or a Money Box Lid lid to store your booty Both are a screw fit and is a nice secure fit once…
Hello, Welcome to my profile, full of models and miniatures :-) I have for you Hobbits, dwarf, gnome for an exhibition or a diorama. Very nice figures. They are suitable for coloring. My children absolutely love them :-). Important: If by…
The existing shelves lacked consistency with the original container by Preb, so I designed a parameterized version that uses the same latches as the box to hold the shelf segments together. The top plate can also function as a Gridfinity…
VESA 100 Wall mount. Designed for Philips monitor, but will probably work for any VESA 100 mount. Philips mount is countersinked 8mm deep with a hole 120mm width and height. Print it standing up and 4 walls to get best strenght. I printed…
(DE) Stabiler, schnell zu druckender 45° Winkel mit Versteifungsrippen und 6 Bohrungen. Egal, ob Sie ein DIY-Projekt planen oder Ihre Wohnräume aufwerten möchten, das robuste und leichte Design garantiert Stabilität und Langlebigkeit. Die…
This shelf bracket is designed to fit the Ikea Burhult shelves( https://www.ikea.com/us/en/p/burhult-shelf-white-80400042/ ) But any shelf with the same dimensions will fit. The screw holes are made to fit screws with a head width of…
A simple monitor holder for Ikea Skadis. Suitable for Vesa 100x100. Separate the model into two parts in the slicer and turn the two parts to the side of the hooks. so no support structure is necessary. I recommend at least PETG! Eine…
## APPARENTLY THE FAST_START MACRO DOESN’T WORK WITH QIDI BOX. FW 1.7+ can also cause issues. Sorry. ## ## NEW in v3.5: PRINT_START_COOL to circumvent the common heat based Z issues. ## There's a lot to improve in the stock Plus 4…
Check out the new Framework x Cooler Master Mainboard case for US$39 BE CAREFUL the power button might get you into trouble. Currently only has the reference designs from Framework. Custom designs coming soon! Stay up to date on the…
Driveshaft for 1/24 scale crawler axial SCX24 and Probably AX24. First pass so still a little rough but practical. Designed this so I could flip my motor/transmission around for more weight forward. Needed custom driveshaft lengths. I…
New version of the model 1.1, optimized for easier printing. Game from first episode: keys and knives Support is needed. You can print individual parts and then glue the entire model. I will add photos of the finished product as soon as…
Do you DARE summon the dead? how about some Demons? Here are the files for my Haunted Gravestone It is sized to suit an old Motorola G4 that we had going to waste in a drawer. The G4 is quite a large handset so slightly smaller ones could…
vymodelováno ve FreeCADu
https://www.printables.com/model/1122014-tazne-zarizeni-rc-110-towing-device-110-rgt-rescue it is necessary to describe the parts when printing! Pneu https://a.aliexpress.com/_EQaJNvO PLA AURAPOL 25% infill 3 walls .02 layer height no…
3D Printable Caddies that you can use to adapt the 3 ½" storage bays of a 45Drives Storinator (AV15, Q30, S45 or XL60) or 45Drives Homelab HL15 server to accommodate a standard 2 ½" 7mm SSD or 2 ½" 15mm SSD. You'll want to use these M3 x…
Pendant in the shape of the boxing gloves. 20% infill. Printing with supports.
Laser visualizer of sound waves Sound propagates as mechanical waves through air molecules. This device contains a rubber membrane that vibrates in response to sound waves. On the membrane is a small mirror, onto which a laser is…
Cover for Garmin LiveScope Plus LVS34 Transducer
These files are designed for the most part for laser cutting. But if you are not confused by the small size, you can also print them on a 3D printer. To increase the size, you can cut these models into pieces, print them separately and…
I noticed everyone printing the base model with brims, so I printed it similarly. I hate brims, so I decided to add some hooves which are solid on the bottom in order to accomplish the same goal. Enjoy.
The Chest of Legends from Sea of Thieves. Printing: For best print results, print the emblem and chest separate. I have provided the chest without the emblem (chest-of-legends-no-emblem.stl) and standalone emblem…
Follow us on Patreon & Instagram for the latest models. ❱ Instagram: https://www.instagram.com/sektor7_studios_3d/ ❱ Patreon: https://www.patreon.com/sektor7_studios (commercial license & more beautiful designs) MINI LUCKY PIGGY 🐷🎉 Start…
WaveShare 7.5" e-Paper case - symmetrical and without holes on the outside. Note: There is a new variant available now too. Check it out here: https://www.printables.com/model/1400457-school-timetable-with-epaper-display Features: For my…
I wasn't happy with any commercially-available options for this and the 3D-printable solutions I found online were iffy, so I made this design! This model is intended to be secured using 4 or 8 M5 heatset inserts, and 12mm-long bolts…
Inspired by a model at thingiverse (https://www.thingiverse.com/thing:3544454) But needed something to be laser cut. Designed to enclose the drives, which is why the ends are not symmetrical. You will (obviously) need two identical parts…
Simple low profile wall mount for 100x100mm and 75x75mm VESA monitors. I used it to mount my 34" ultrawide and it worked like a charm. Because of the low profile, 4 screws and angled dovetail it's very easy to install and very strong. Use…
Ozdoba na pověšení na stromeček s nápisem “Veselé Vánoce” Materiál: zlatá PLA Tryska: 0,4 mm Teplota: 195/60 °C Vrstva: 0,12 mm Výplň: 100% Perimetry: 2
This is a scent training vessel for dogs learning or competing in scent work / nose work. You can place the scented object inside (such as a cotton swab infused with essential oils). There are two sizes to choose from (the original, 64 mm…
This is a design of a VESA adopter designed to fit Samsung Odyssey G9 screens. Adapter is reinforced with M8 Bolts. Hardware list: 2 x M8 x 70 mm - to reinforce 3D printed part with clamp force and take up the bulk of sheer force 4 x M4 x…
![Finger Surfboard! Ride the air waves out of your car. [FlyBoard 1.0]](https://media.printables.com/media/prints/100757/images/1014229_9fb2d64a-7f8e-462f-bf0d-7fc1a294fc48/large_display_finaldisplayphoto_100757.jpg)
