Counting matching models…
Modeled this SCX10.2 flat skid to install a Vanquish VFD transmission basically as far forward as possible. Used this along with the Xtra Cab trays I also uploaded. Certain bodies may require some modifications to the body and/or the…
VFD Keypad Mount for Masso Touch controller: With permission from PwnCNC I'm posting these mods I made to the VFD keypad mount. The original size of the mount for the keypad has not changed, only the back plate size. How well this fits…
This has been remixed for use with 1.5/2.2kW 65mm VFD Spindles and normal 1.25" / 32mm Internal Diameter size vacuum hoses and to use readily available 12.7mm x 3.175mm Neodymium magnets. Notes : Suction area has no reductions in size, so…
Designed this VFD KeyPad Holder for the YL620 available on AliExpress. This fits in the same size hole as the original part, but the dimensions have been updated for the keypad. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts:…
I needed a way to securely mount the servos on my VS4-10 builders kit chassis. Since I was using a custom body and some other modifications, other options didn't work for me in a clean way. I can''t guarantee that this will fit with the…
A case design for whowechina's AIC Pico, based off the real VFD Aime reader assembly. (outer measurements should be fairly accurate but missing mounting) NOTE THAT THIS DESIGN IS UNTESTED - PRINT AT YOUR OWN RISK The midframe is designed…
VFD KeyPad Holder for the H100-1.5C2-1B
I needed an enclosure for my VFD (Variable Frequency Drive) bought off Amazon , specifically the MySweety brand re:cheaper. I use the VFD to control the motor on my 272 belt / bench grinder and just been stuffing this in a plastic tote…
For fans of Lemony Snicket's A serious of unfortunate events
Hi, Here is my latest creation, yet another clock ! This one is based on a IV18 VFD tube. You can find a lot of models on ebay. some documentation : https://web.jfet.org/inGrid/ It is powered by a simple USB charger or any laptop USB…
This is a second desgn of my IV18 VFD clcok here : https://www.thingiverse.com/thing:3037333 This time have choosen the "most minimalistic" design. My goal was to get an almost floating clock : the tube just above the wooden base. A full…
A Symmetrical Bracket designed to mount VFD to Lathe with: 40 Al extrusion like Item Profil 8 40x40 1-3 M8 Countersunk Screws DIN 7991 M8 T-Nuts DIN 508 Printed in ABS 3 Walls, 20% Infill Should be fine to Hold 1-4Kg Components depending…
A clean clock design that uses soviet IV-6 VFD tubes. Plenty of space inside for a Wemos D1, step-up converter, GPIO expander, and transistors to drive the segments :)
No-frills, simple design with only the functions I need and based on readymade components. Works with Magsafe. The clock is perfect for a nightstand because it can be dimmed, and the settings button is still accessible through a hole…
I upgraded my Router to a Chinese spindle. The cover that is provided wasn't flat on the front to mount a Pot or switches so I made a replacement and also made LED light rings for a 60mm air cooled spindle and a 72mm ring for a water…
Hook up the wires on the bottom side before putting on the cover Put on the cover And now screw the wires on the top terminals No need for supports
This is a case for the Audio-Spectrum-Analyzer VFD2515 to be able to use it as standalone device. I placed the input sockets on the backside of the case to hide the cables. To power it direct from the STB standing below I used an…
потребуются резьбовые вставки М3х3х4.2 и винты М3х16
Prints with no supports needed, and looks great on a textured bed in matte filament. A case for the INBN0BV1287UD VFD module. The case is a single-piece print with a recessed bezel for the VFD glass and a friction-fit pocket that grips…
A mounting for Huanyang VFD (HY Series, 1.5kw air-cooled HY01D523B) made for Altmill MK2 CNC made to fit on the left leg because the official VFD bracket by Sienci Labs wouldn't fit this VFD size. I printed with 6 walls, 15% gyroid infill…
What you can see in the picture can be cut using a laser cutter or printed if you do not have one, but keep in mind that 0,1mm depth is probably not enough for a printer to make the signs look nice, so make it 0,25mm deep at least. Any…
This is a mount for the detachable VFD (Variable Frequency Drive) control panel for a SUSWE model SU800900 VFD. These are a very nice, inexpensive, Chinese inverters used to operate a large three-phase motor at variable speed. The small…
Prints with no supports needed, and looks great on a textured bed in matte filament. A case for the INBN0BV1287UD VFD module. The case is a single-piece print with a recessed bezel for the VFD glass and a friction-fit pocket that grips…
This is the link to the VFD display: https://vi.aliexpress.com/item/1005005836470911.html The device is offset inside the case so that the text appears in the centre. It needs to be reassembled to fit into this case. You should be left…
Space for a vent fan and air inlets. Printed on Prusa XL from PC at .2LH and using a .4 nozzle. Mounted to 8020 frame with 5mm through-bolts. Cover mounts with 3mm bolts and brass inserts. The vent fan is sized for https://a.co/d/9uC57i9…
This is a mount for the detachable VFD (Variable Frequency Drive) control panel for a SUSWE model SU800900 VFD. These are a very nice, inexpensive, Chinese inverters used to operate a large three-phase motor at variable speed. The small…
The XSY-AT1 VFD was not designed for external cable routing. This adapter allows for safe external wire routing to the VFD. Design Considerations: No modifications to the VFD housing needed. Easy alignment. Secure mounting. Support up to…
Cut a ~81x81mm peace of felt or other filtering material, push it into the printed part and snap onto the fan grill
This replacement nose piece and control panel for the Jet JDP-17MF drill press allow mounting of a direction switch, speed control and tachometer for VFD conversion. I have provided STL and STEP files for the replacement front housing as…
Strain relief for Spindle VFD cable and water cooling lines. Comes in two parts, held together by M4 x 10mm machine screws and nuts. I printed a bunch to route the cables and tubing along the vacuum line to the back of the machine. VFD…
Updated source code: https://github.com/truglodite/3D-Printer-Enclosure I designed this for my Lack enclosure arduino control panel circuit featuring a 7.75" 2x20 IEE VFD. The model number of my VFD is 05464ASSY35119, but there are other…
Digital File to DIY 3D print a Onefinity or Generic VFD Control Box. Support controlling accessories (like vacuum, colling pump, router) power outlet Start/Stop - Automatic from CNC Controler - or Automatic from HY Huanyang brand inverter…
A clean and interestingly looking IW-21 (IV-21) VFD tube clock, thermometer, and anything else you program. ESP32 Inside. Tube driven with transistors.
A clean clock design that uses a soviet IV-27 VFD tube. Plenty of space inside for an ESP32, step-up converter, GPIO expander, and transistors to drive the segments :) Sketch and documentation: https://github.com/revoxhere/IV-27-VFD-Clock
This is a VFD-Clock from www.grother.de I built the clock a long time ago, with a simple wood case. Now I designed a new case. It is made of PLA Eryone Ultra Silk copper.
Часы на VFD IV-27M, ИВ-27М индикаторе с WiFi, на основе универсальной платы VFD Clock ESP12(ESP8266) WiFi (universal board) VFD Clock ESP12(ESP8266) WiFi (universal board) Current features are: -network time and date synchronization…
ABS 0.1mm layer height 100% infill I print multiple on 2 layer raft. Paint with 000 brush and acrylic paint that been thinned a little with water. Coat with acrylic gloss medium. CA glue pin tie back on.
3D files for an IV-18 clock I've made as a gift. With alarm function and internal RTC. Everything made by me.
I designed and built a batch of these as Christmas presents. Design files for electronics are available at: https://github.com/Wiles/iv-12 Short case requires a right angle USB cable. Category: Electronics
After making the transistor radio style piggy bank I decided to repurpose the model by giving it a new front and including an analog vfd clock module (originally purchased from Kosbo ). Et voilá - here is my retro desk clock.
This is the shell I designed for my VFD screen project. You can check the schematic and code from this GitHub repo. https://github.com/megabitsenmzq/MyVFD/
This is an angled panel housing for the control panel on an XCFDP VFD. I only can confirm that it fits the XSY-AT1 Model AT1-2200x. It likely fits other models from the same manufacturer, but please check your dimensions before printing.…
Included are both Fusion and 3MF files for cable & coolant hose management clips that I made for my PrintNC CNC machine build. The designs are parametric and can be easily customized for whatever diameter hose or hose & VFD cabling you're…
