Panel Mount for SUSWE model SU800900 VFD
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a mount for the detachable VFD (Variable Frequency Drive) control panel for a SUSWE model SU800900 VFD.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 6
- Makes
- 0
- Views
- 42
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution
This is a mount for the detachable VFD (Variable Frequency Drive) control panel for a SUSWE model SU800900 VFD. These are a very nice, inexpensive, Chinese inverters used to operate a large three-phase motor at variable speed.
The small control panel detaches from the main inverter and can be located remotely using a CAT5 (orCAT6) network cable. I had an existing 2 inch (50mm) diameter meter hole that wasn't in use that I wished to repurpose for the panel mount the VFD control. The rear backing plate centers the whole mount in the 2 inch hole. Two M3 countersunk screws hold the front housing to the rear backing plate and clamp the assembly to the sheet metal panel.