95 models
1S LiPo Storage and Charging Case for up to 30 LiPos. Optimized for the ViFly WhoopStor 3 Charger. Includes a Lid to close it, but I never use it myself. You are fine just using the charging case by itself to organize your LiPos.
JeNo 3" Vifly finder mini support to be mounted on the back of the top plate. Print with TPU. Print vertically, resting on the small side. No support needed.
I really liked the lower portion of the WhoopDegen Case designed/remixed by Jron2008 on thingiverse, but was not a fan of the outer box/hinge design, the large screw holes not matching the screw size and needing nuts, and the wasted space…
This is a, Capacitor + spike absorber + Vifly finder 2, support for a JeNo 5.1 Frame , remixed from my model for a Vifly finder mini. The JeNo 5.1 frame is an open source frame project design by Nochamo and JeromeFPV from the french…
Made for standoffs with a distance of 25mm. I use it in a Speedybee Master 5 HD frame. There are cutouts for cables and the voltage switch and bumps for easier pressing of the button. Print in TPU.
I like the Vifly Finder 2 Buzzer for being cheap, functional and reliable as far as I can tell Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: Yes Resolution: 0.2 Infill: 30% Filament: SainSmart TPU emerald Notes:…
Print in TPU without any support
Support pour Vifly Finder 2 et condo pour frame JeNo. Compatible avec cam plate 25° et 40°. EDIT 21/05/2024 : Ajustement de certaines côtes et ajout d'une version pour condo de diamètre 12,5mm. N'hésitez pas à me dire si vous avez besoin…
A holder specifically designed to mount a ViFly Finder Mini buzzer to the rear standoffs of the Botgrinder Grinderino quad frame. And a perfect match with the HDzero antenna mount designed for this frame. There are two versions of the…
A box for storing a VIFLY WhoopStore 1s LiPo charger (https://www.viflydrone.com/whoopstor.html) together with a short cable (the included USB-C cable or similar). The lid comes in two versions, with and without text ("VIFLY WhoopStor")…
The original 3D printed part that came with the rekon 5 did not fit my Vifly Finder 2. So I made my own based on the design of the original. Can be printed without supports in TPU. You might need longer mounting screws. Print Settings…
This is a, Capacitor + spike absorber + Vifly Finder Mini , support for a JeNo 5.1 Frame . The JeNo 5.1 frame is an open source frame project design by Nochamo and JeromeFPV from the french community WeAreFPV . Details : I have a 10mm…
UPDATE: v0.2 features a vertical side grill for easier print. This case is designed to mount VIFLY Finder 2 to the rear standoffs of the It’s FPV ERA 5" frame. It was modelled around the O4 version, with enough space for the dual-antenna…
Mounts the Vifly Strobe to the base mount without tape and at same time turns the 3 white LEDs to “legal” green for night flights in Germany which is far brighter than the single green LED on the Vifly. Works as diffusor which turns the…
I took the idea and dimensions from the original model and created a new model that fits the TBS Source ONE 5" V5 frame (standoff distance 19 mm, diameter 5 mm). I also made a small recess to use with the sockets. For better printability,…
suite a une demande , j'ai mis a jour mon tpu pour le jeno 3 , tpu pour le buzzer vifly finder mini et les antenne du dji 04 …. je n'ai pas tester le print ! si des beta testeurs veulent essayer ! le voici a disposition …
Replacement Hatch for the AtomRC Penguin Airplane Made to contain the Vifly Finder 2 Beeper Module
A simple slide to lock in connector for mounting VIFLY strobes to any drone including DJI <250g models. Use double sided tape to connect the light top to a flat section on the strobe (battery side etc) and the light bottom to a flat…
This is my full TPU set for the pavo20 pro II. It is designed to provide protection and longevity, since I use this as an actual cinewhoop for filming jobs. Adds some weight, for me thats worth it on a cinewhoop. If you want to freestyle…
Un mix de 2 fichier combiné pour installé le module led strobe de ViFly sur les DJI Mini 2 tous en demeurant sous les 250g il s'installe aussi bien sur le dessus ou le dessous. pour les modules led :…
Remove original head shrink tube. before putting into case. If you planning to use dark filament i suggest to paint insides of led holes with some bright or reflective color Hardware: M3x10 screw M3 nut (optional, there is "no nut"…
Support pour le buzzer Vifly Beacon. Entraxe du support: 32mm
Used to fit Vifly GPS Mate, and put inside your drone. Utilisé pour installé le Vifly GPS Mate dans la frame de votre drone. Size 30x30 (30.5x30.5) Print Settings Printer Brand: Creality Printer: CR-10S Rafts: No Supports: No Resolution:…
tpu pour jeno 3 -support antenne “dji 03” et buzzer “VIFLY finder mini ” 2 longueur : une de 45 mm , ! il faudra couper la gaine de l'antenne de 20mm ! une de 60 mm , rien a faire -protection de bras ! le tpu est fait de manière a ce que…
salut Je trouve dommage d'avoir ce petit instrument indispensable! pour nos montage de drone , simplement mis , dans un pauvre morceau de gaine thermo ! il mérite d'avoir un boitier , j'ai travailler un peu le design pour le rendre sympa…
Case for using and storing the Whoopstor 3 charger and 6 batteries. Lid is designed to fit underneath the case when in use and has cutouts for charging port and vents to allow charging in place. The fit is a bit tight (0.25mm) so sanding…
Fits both front standoffs and adjusts perfectly behind the front TPU. The button on the side is ideally positioned for the Vifly Finder 2 Buzzer. Choose between 12.5 or 10 mm as the capacitor diameter size.
Modified version of "TBS Source One V5 - Nano RX / ViFly Beacon Mount " from Wavz3D on https://www.printables.com/fr/model/462291-tbs-source-one-v5-nano-rx-vifly-beacon-mount/files To be able to use the vifly beacon on multiple drone, I…
Hold your Crossfire Nano Rx and a ViFly Wireless Beacon securely while minimizing space. ViFly Beacon is able to be removed for charging and able in activate while in mount. 2 Options (See Files) Printed in TPU - 3 Walls 40% Cubic infill
I designed a new back for the Speedybee Mario 5 to fit the Vifly_Finder_2 additionally to a GPS and the DJI antennas. Special Feature: Button to disable the beeper :) Printed in TPU with a manual support (tree slim) see images.
Hello everyone, I made a remix to hold the vifly finder mini in the Lethal Conception Bando Killer v2 frame. Kudos to PhiveOne_FPV from Thingiverse for the original design.
Vifly Finder V2 FPV Racing Drone, to put on the front, just after the camera, can be secured with two screws.
If you use these Vifly strobe lights: https://a.co/d/1DqF4pc You can store two of them in this print for transportation. I would like to develop another outer shell to snap this holder into to cover the top. Stay tuned!
Printed in TPU as 2 parts. I fed the arm through the base, hook side first with the help of a pick backwards and then spin it around to face the correct direction. There are two bases, one that puts the strobe out front and one that has…
.4 nozzle, .2 layer height. TPU
Support TPU pour le buzzer autonome Vifly Finder 2. le bipper (hurleur) se trouve la tête en bas. Je vous mets également celui tête en haut mais l'alarme est moins audible dû à la proximité de la frame et du support GoPro. L'accès au…
V2.3 Allows for GPS to stay powered with a Hold Up Battery (HUB) between battery changes so you don't have to wait for GPS to relock. It also acts as a traditional buzzer and still works if the battery is ejected. If you fly long range,…
Printed in TPU with 30% infill and an slim tree supports on build plate only (see images).
Description This is a mount frame for carrying the Vifly GPS Mate. I remix the model from Juli3n and adjust the mount to 25x25. You'll find the file in STL and STEP if you want to modify it. Material Use TPU Nota : assembly tolerances are…
Made with TPU No support are requested Capacitor diameter 10 mm
iflight GPS and Finder Mount ( Backpack-Sandwitch) for Diatone L5 Longrange ... may also fit F4 and LR4 but not testet. also TBS M8Q GPS should fit Category: 3D Printing
https://www.reddit.com/r/fpv/s/R96kIWoKZZ
needs four 3mm height by 6mm diameter circle magnets for magnetic lid also needs four 30mm m3 button head bolt printed on prusa mk4 with mmu3
TPU Permettant de fixer un Buzzer autonome Vifly Finder Mini en même temps que l'antenne O3
Simple one piece plug for Dc and XT60 port for Vifly Whoopstor 3
Vifly 2 holder for ERA drone, mouted to the back part of frame. Printed in TPU 95A.
JeNo Low Profile Support condensateur standard + Buzzer Vifly Mini Bumper Avant Protection bras
Phen X Frame Support Buzzer Vifly Finder 2 + Condo Panasonic 1000uf 35V
Dust Protection Cap for VIFLY WhoopStor – JST PH 2.0 Connectors This model is a simple but effective dust protection cap designed for the JST PH 2.0 ports on the VIFLY WhoopStor charger. It helps prevent dust, dirt, or debris from…
Vifly Finder 2 in step ✅ Made for TPU creation Fly safe
Made a mount for the Vifly Strobe for the tailboom. Print in pale half-translucent white PLA. I find that neutral colored PLA often works very well. If you like my designs please consider donating a coffee or any amount really, I…
2xM3 screws and nuts required. Case does not block buzzer, led or light sensor Decicate design for armattan beaver, but might fit for other frames it tooks 30mm screw pattern
Here is a pretty case for the famous VIFLY Beacon buzzer Simply inspired by some 3D printing products from fpv shops I added a small hole to better see the LED inside (even if you choose a dark filament). I use the Bambulab TPU for AMS…
I printed it with TPU 95a
protection lipo pour speedybee mario 5 avec support pour vifly mini finder integrée et acces facile au bouton. En impression TPU
These side plates are designed for my iFlight Nazgul Eco DC 5" FPV drone to protect the electronics from debris while providing easy access to the FC's USB port and the VTX's SD card slot. At the front, there is a space for the Vifly GPS…
Holds 3 Vifly strobes, one model has a hole a little oversized for two 20x20x2mm magnets. I was able to cut the unused foam out of the filter set and fit the strobes in there with the mounting feet.
0.4g heavier than stock baby ratel 2 tpu The buzzer itself adds another 2.7g
This is an optional add-on for my SpeedyBee Mario 5 Custom TPU Mount . It is designed to securely hold a VIFLY Finder 2 Buzzer (100dB) . Compatibility: Fits perfectly underneath the GPS/Antenna module of my main SpeedyBee Mario 5 mount.…
This is a housing to hold the ViFly Beacon on the Mario5 Frame. It uses a TPU Button to press the button on the ViFly Beacon from the bottom of the frame. I have only tested this with an HD Zero Camera. Other systems/cameras may not fit.…
case for vifly whoopstor 3. to speed up the time of preparation for the flight. allows you to charge batteries in the backpack while you get to the spot.
Quick Edit with Tinkercad adding a mount for a VIFLY buzzera 13mm Capacitor with space for a Skystars ELRS RX under the cap https://www.tinkercad.com/things/8fE27xkF3Dk
Case for your ViFly Whoopstor V2. Covers up the side ports to ensure dirt stays out so be sure you only need the top ports to charge.
Skadis Mount for VIFLY WhoopStor 3 Keep your workspace tidy and your gear right where you need it! This custom mount allows you to securely attach the VIFLY WhoopStor 3 or SkyRC B6 Neo+ charger to an IKEA Skadis pegboard. No more loose…
Meteor65 Pro II O4 – Rugged FPV Case 🚁 Everything you need for your Tiny Whoop adventures! I designed this rugged transport case to keep my BETAFPV Meteor65 Pro II O4 , LiPo batteries, and charging equipment organized and protected in one…
Hello This is a mount for the BDR Iris drone : https://rotorbuilds.com/build/27906 It allow to fix: - HGLRC M80 GPS - vifly finder 2 buzzer - Vista antenna mount To be printed in FLEX. Happy flight. Julien
Voici 2 supports pour le Kayoumini * un support pour vifly mini * un support pour l'antenne du O4 Les deux supports se montent sur la bottom plate et peuvent accueillir une lipo 2S 450mah
I did create this Vifly 2 + cap Ø10mm support for HIGHTCULT & LOWCULT frame Print Settings Printer: Artillery Genius Rafts: No Supports: Yes Resolution: 0.2 Infill: 15 Filament: Any TPU Any Category: Hobby
I use this model to hold two Vifly chargers and power them in parallel from a single power source. Compatability: Suitable for both Whoopstor 3 and Toothstor chargers. Support my work: All of my models are available for free. If you'd…
TPU print Print with support 16/08/2024 : Version 2 add 4mm lenght to protect connector reinforcement of screw housing
Replacement bottom plate for the acrylic bottom plate of the vifly whoopstor
TBS Source One v4 Vifly Finder 2 (Buzzer) Mount Created to hold the Finder in place, without any glue or other sticky and nasty stuff. To be placed on the standoffs behind the camera but before the FC Note: This is for the full size…
The front standoff mount for Vifly GPS mate with extra room to zip tie extras (I'm planning to mount SpeedyBee FC configurator and ELRS receiver). Please note, this model doesn't use Vifly JST connectors, instead it requires soldering to…
I was tired of carrying large, mostly empty screw bins when out in the field, so I designed an inlay for the Vifly Finder / GPS Mate (all the same) cases. They are small and compact, yet I have alle the screws I might need for a quick…
Adapted the design to mount on the Lethal Conception Bando Killer v2 frame and added a mount for a Vifly mini buzzer on the back.
This is a HSW compatible storage compartment for A VIFLY WhoopStor 3 or a SkyRC B6 Neo+ or Neo 2 battery charger. @rhaen_3530839's original design is a Skadis mount but I put a Honeycomb mount on it instead. You must use an 'insert-empty'…
I figured mounting the charger on the wall to charge batteries would be convenient—and it totally is!
Updated locking sides, modular inserts, slide drawer, and insert for 550MAH 1s LiPos.
Support for the Viflybeacon tu put on a lipo strap (large version 20mm)
Hi! This buzzer holder has to be installed behind the fpv cam, on the standoffs of the TBS source one V5 frame. Print in TPU, 100% infill, no support needed. Edit: Thanks to Talhah remarks on his remix (…
Bei diesem Modell handelt es sich um eine eigenständige Entwicklung, die nicht vom Inhaber der Originalmarke stammt.
Hi! Here is a Vifly finder 2 mount for the JeNo 5,1" frame Print without support, 100% infill 💡 For full versions, optimized models and more options 👉 https://cults3d.com/@-kC- 📦 All my designs and more : https://atelierkc.fr
Tried to find an elegant way to fit a Finder 2 in the back of the Punch, but kept running into slight space and clearance problems. The solution to this is to cut the shrink wrap off the Finder, and split the battery and the buzzer so…
What it is A dimension-accurate CAD model of the VIFLY ShortSaver V2 smoke stopper, measured with calipers. Use it to design mounts or cases around the real part. Why you want one Plug it between the battery and a new build for the first…
rotor riot moxy frame vifly v2 beeper with sharkfin
Gridfinity bin for the Vifly ToothStor LiPo charger with a small cable storage. The carger can be used inside the bin, since it has air intake and exhaust openings. It is compatible with the 5u Rugged Gridfinity box.
I use this model to hold two Vifly chargers and power them in parallel from a single power source. Compatability: Suitable for both Whoopstor 3 and Toothstor chargers. Support my work: All of my models are available for free. If you'd…
Fits both front standoffs and adjusts perfectly behind the front TPU. The button on the side is ideally positioned for the Vifly Finder 2 Buzzer. Choose between 12.5 or 10 mm as the capacitor diameter size.
These side plates are designed for my iFlight Nazgul Eco DC 5" FPV drone to protect the electronics from debris while providing easy access to the FC's USB port and the VTX's SD card slot. At the front, there is a space for the Vifly GPS…
protection lipo pour speedybee mario 5 avec support pour vifly mini finder integrée et acces facile au bouton. En impression TPU
Printed in TPU with 30% infill and an slim tree supports on build plate only (see images).
This is a HSW compatible storage compartment for A VIFLY WhoopStor 3 or a SkyRC B6 Neo+ or Neo 2 battery charger. @rhaen_3530839's original design is a Skadis mount but I put a Honeycomb mount on it instead. You must use an 'insert-empty'…
![[JeNo 5.1"] Support Vifly Finder2 + condo (diam 10 et 12.5mm)](https://media.printables.com/media/prints/831007/images/6406449_2e4dcd8c-c5ef-421f-a3c4-4215835dadcb_96e06ed8-1d71-4af9-8594-1a05fcecee0c/img_20240403_154722.jpg)
