Counting matching models…
Video by Teaching Tech - Teaching Tech was kind enough to make a review of this Bench Mountable Vise. It has some great info on downloading and assembling this design. !!! LUBRICATION: This design will not work without lubrication. I use…
This is a custom print bed stl and textures for the Creality Ender 3 V3 KE for use in Orca Slicer. There are different versions of the texture files. Hope one is to your liking. For the purist… The Print Bed stl is true to the original…
No supports needed; stock settings should be fine.
There were similar rack mounts for NVRs but not for my Hikvision DS-7104NI-Q1/4P/M. Dimensions: 265 × 223 × 48 mm The weight of the machine is not that much, therefore the front support is enough. Print with face down for nicer finish.…
Revised version of my Anodontosaurus
I use this cap to protect the ZEISS lens inserts. I printed the cap once for one lens and then mirror flipped it and printed again for the second lens. I used soft TPU plastic
Printables Visor Cap - wearable Print the Headband with TPU
This haptic 3D-printed educational aid helps blind children develop fine motor skills and shape recognition. The set includes columns where students must sort and place squares, triangles, circles, and rectangles based on touch. By…
TrackVision - The Open Railway Project Welcome to the TrackVision ecosystem! This is a comprehensive, custom-designed model railway project built from the ground up for makers. It features a unique, non-standard scale engineered…
An extruder visualizer in the shape of a shuriken. has a small place for a magnet.
Replacement stand for a Vision Engineering Mantis Microscope making use of a ¾" gas pipe and nipple mounted through the desk Additional hardware required: ¾" wood drill to go through desk ¾" Iron pipe DN20…
this was made to work with https://www.printables.com/model/1056695-laser-visualizer-of-sound-waves/files. it allows me to use my redmi note 12 phone speaker as source of sound waves. my phone thickness is 7.8-8.2 mm and this works well…
The original model is meant to be used with a magnet. Just glue it!
a more positive talon catch for the grass snake
40 to 60 mm visual guide design to make it easier to 3D model and design your creations without the need for digital calipers !
Inspired by the amazing design done for Fortnite, I decided to turn it into something wearable. Always loved that classic Cyclops design and was surprised not much has been made for it. Model is very simple and features the main piece and…
This magical runic circle allows you to cast spells like a real wizard or witch on Halloween or every other night at Midnight. Unleash your best curses accompanied by wicked laughter, wave a magic wand over the runic magic disc, and light…
Measuring spoons for visually impaired people, holes make it easier to recognize. Printed with PLA 100% infill. Not mine creation, just reupload it from thingiverse.
This plate was generated from different svg templates and mainly reworked on CorelDraw!, then exportes as svg and imported in TinkerCad, cut out, joined, finished and exported as individual stl-files, which you can drag into your slicer…
V2 UPDATE: Ok, so i had a brainfart while "CADing" this and made it too tight for no reason at all. Now it should fit MUCH BETTER. The clip has identical dimensions to the original and the same function. The only thing that i could not…
I glued a magnet, 6mm wide, 3 mm thick into the bottom part. I slide and glued the Z into the slot of the bottom part. I love to look at Z axis movements during a print ! I have used a standard plastic glue, no cyanocrilate.
New, more detailed version in different badass poses. Each pose has multiple options with varying amounts of armor.
Canopy for Hikvision DS-1258ZJ WM110 camera holder. Protect the camera from rain and keep it clean to prevent poor view
Adapters that slide over the arms of an Apple Vision Pro to enable the attachment of a second Dual Solo strap. The arms have to be detached from the body using the special pin that was shipped with the AVP. I printed the adapters…
Keep your 8" Kurt vise chip free with this easy attachment. Bolt on the attachment plate with a 5/8 nut in the back, then chose the deflector spacers that are the right size for the job and your faceplate. Secure them in place with a…
Worked for my ender 3 v3 se stock extruder, should work for other extruder if they are the same dimension. It is friction held in place.
è suggerito l'utilizzo di feltrini adesivi per non graffiare il banco da lavoro o la scrivania. al primo assemblaggio forzare leggermente le viti nei fori e avvitare/svitare più volte per rendere lo strumento più scorrevole; fare lo…
UPFRONT: I just created an Discord server for the PVS420 so its easier to talk about and share thoughts, ideas, improvements. All further updates to the design, functions and software will be available on my Discord!…
This is an improved Riser for the FlashForge Adventurer 5M Pro. I made the fit better and removed to tab slots that didn't work for me. The front sides have 2 x 5mm dowel holes and 2 dowels. The rear sides include the 3 rectangular plugs…
Solid version uses a lot of filament - 78 gram at 40% infill. And a lot of time too! - 2 hr and 15 min at 200 mm/s. So i created a lightened version for those who want to save time and filament. Lighter version only uses 43g and takes 1…
This is a nice decorative yet still functional vase I designed in FreeCAD. The cup bottom should be watertight, and has a slight internal lip to reduce the chance of a spill. It prints without supports. I also created a candy bowl…
There were similar rack mounts for NVRs but not for my Hikvision DS-7104NI-Q1/4P/M. Dimensions: 265 × 223 × 48 mm The weight of the machine is not that much, therefore the front support is enough. Print with face down for nicer finish.…
The design makes use of the 4 x 9mm pins for alignment. The pin holes are modeled with a very tight fit (0.05mm clearance), adjust as necessary. The center hole needs to be precision threaded M14x1.00. Any deviation off centre will render…
This is a two-part holder to mount the Trendsetter jewellery practice wheels onto the Jura inside ring vise. It comes in two parts, both printable without supports. It slides in between the various gaps in a Trendsetter practice wheel to…
2004 - 2012 Bentley Continental GT and GTC SunVisor Clip. Original centre piece and cover fit this model as shown in the photos. This was designed from scratch and not scanned. Printed on Ankermake M5c with 40% honeycomb infill to ensure…
I made a better knob for my panavise 376. Printed without supports with red TPU95A filament on an ultimaker 3 with 0.8mm nozzle.
I liked the cup holder that VersusMakes published. But when I added my tall bottle it would turn and drop. The bottle dented and the cup holder broke :( So here's what i changed: changed clamp so its at a fixed 40° angle → the holder…
Sun Visor Cap for Ford Fusion based on DS73-F040A26 I installed it in my car, and seems firmly in there. I increased a chamfer from 0.2 to 0.35 before uploading to ease removal when desired. If the cap doesn't stay in as desired, let me…
This side clamp jig is a fastening device used to hold objects securely in place by applying lateral pressure using a regular clamp as the holding force. It consists of a clamping mechanism that applies pressure to the side of a workpiece…
This is a remixed pad to fit Quick-Adjust Half-Nut Vise by LoboCNC, it is better for holding PCBs or cylindrical parts. I made the pad a bit thicker, and have three V grooves at different heights. one on dead centre. Freecad .STEP and…
Affiliate links for my favorite filaments to help support what I do are here: Linktree A simple mount that cleanly display's your Ace of Spades nerf gun on the wall in either vertical or horizontal orientation. It inserts into the chamber…
*** Thanks for checking out this model! *** If you appreciate what I'm doing, consider buying me a coffee , and check out my other models for something else you might like! ********* Why I designed my own retainer case: Most of the ones I…
If you have your own composting bed and in support of the effort and validation of biopolymer degradation claims, we created a very simply 3D object that is multi-functional for composting trials. Its made of a varying wall thickness, as…
Visor clip that can hold items on both sides. Store a handicap placard on one side and cards on the other. There is also a spot that can hold paper like a parking lot ticket.
Remove the slop from your clutch pedal clevis with this bushing. I recommend printing with TPU or ABS for the best fit
Following the design of self-centering chucks for lathes, I designed this project from scratch with many test prints along the way. The large vise can hold a maximum diameter of 3 inches (76 mm), and the small vise 2 inches (50 mm). Note…
This custom-designed accessory serves as an alternative to the original Light Seal on the Apple Vision Pro. It allows the headset to be used without the default facial gasket, offering a more open experience that’s especially useful for…
Are you tired of the poor camera quality of the Creality Hi? Wish you could see your prints with clear resolution and night vision? I was frustrated with the camera quality of the stock camera in the Creality Hi, as are many others. I…
This is an improvement on my old model which was much bulkier and more uncomfortable to use. I found my last model to be really nice for the first grit but my hand would start to ache after a while so i made this smaller, softer and…
Remixed the original clip as I didn't want to have to attach anything to the remote and as I still had the original Steel Line Garage remote holder I made modification to make the clip narrow and able to slide into the remote holder.
If you like this remix and find it useful, I’d really appreciate a like this model ♥ — it helps a lot and supports future models and updates 😊 ///////////////////////////////////////////////////////////////////////////////// This remix…
I made these to rebuild my Kawasaki H1 forks, they should work for any 36mm fork. 6x2 magnetic insert holes allow for press fit, which will keep the soft jaws in place while you work. I used IEMAI PETG CF with Anycubic Kobra S1, .6mm…
UPDATE 2025-09-09: I've added the missing lazy susan files. Thanks for letting me know! I got impatient waiting for the lazy suzan to arrive from Amazon so I designed a printable version. While I was at it I remade the fractal vase to…
FAST PRINT I use it on my Magura MT5 Pro , but it should work with other brakes You can use this either for bleeding your magura brakes, or when traveling with uninstalled wheel It can be also used when you need to press pistons back ,…
Kartenhalter für Technik-Ausstellungen, Musterwohnungen, Beratungsstellungen, die mit WiQQi-Arbeiten. In der Pinwand-Version können Reißnägel eingeführt werden. (Infos auf WiQQi) Hintergründe auf WiQQi
Textured and untextured replacement protective vice jaw caps for Bessey BVVB Vacuum Base Vise (BV-VB) . I tried to replicate the stock ones as close as possible for a first iteration, I may tweak the design a bit to remedy some…
It's a very simple two part construction that you press fit together. It was made that way in order to print the base red and the pattern black. I might add more patterns in the future. The Whole thing has a diameter of 3 cm and the…
I printed this out of TPU with 3 walls, 8 top and bottom layers with 20% gyroid infill. There are two types of dimmers here to account for the presence of a screw head protruding from the behind the knobs. On my range, I needed one of the…
Experience a captivating blend of retro design and futuristic technology with this 3D printable STL model of the Hyundai N Vision 74. This sports car model is perfect for automotive enthusiasts and concept car admirers looking to showcase…
I liked the original model but wanted it to hold more securely. See remix changelog for notes. Fusion 360 files included. Have fun. Licensing: Credit/attribution/link is my only requirement. Free to use, modify, or sell. Please share your…
It was created for and is compatible with the Hikvision DS-KH6320-WTE1 model, which is a KH6 Series IP-Based Indoor Station.It was created for and is compatible with the Hikvision DS-KH6320-WTE1 model, which is a KH6 Series IP-Based…
Shaft hole is 5.1 mm, fits just right in my print. Optionally a 5x3 mm magnet can be inserted on front for better fixation. Snakes are thin, so squishy and wide first layer would be good to avoid gaps. Added mirrored versions as I just…
Replaces the screw and washer needed to attach visor to Kask Super Plasma hardhat in case you lost or broke yours
You will need a ¼" - 20 Long screw/bolt, 2 or 3 nuts ¼-20 a #10 Bolt and nut ( I got mine from a harbor freight storehouse kit) a washer, wider is better, but the hole should still be small, maybe a fender washer? Concrete to weight it…
Filament - PLA Color Changing, Silk Layer Height - 0.3 mm Perimeters - 3 Infill - 15% Gyroid Supports - Definitely NOTE: Joint was intentionally made tight (0.15 mm clearance per side). You may need plyers to fully seat it.
Inspired by https://www.printables.com/model/1407760-sunglasses-holder-for-sun-visor-in-car But it's hardly a remix. I built it from scratch, added “teeth” to the design for better grip and honestly was experimenting designing with…
Dockcase Visual USB C to 4 in 1 Hub (measures 31.5mm x 13.25mm x 98mm) holder wall mount. Mount with two poster command strips or two screws 40 mm apart. Can hold the hub either horizontal or vertical inserted with the cable in either…
update v2: ear cups holder updated, print in one piece no need assembly. I made a custom headband for over-ear headphones (I did these for the omega dms open-source headphones) using an Apple Vision Pro knit band, a set of thin blank…
Introduction The QVES is an extensive collection of easily configurable parts that can be used to make your Cooler Master QUBE case truly yours. Provided files can be printed as-is, enhanced by color changes or modified with your own…
PVS-31A Night Vision Specs Adjustable you can use the supplied printed rods to attach the lenses or use a long bolt and nut. Use HollowSpecs. For hollowed out lenses. (you can see through them)
🛠 Instantly Functional: Print it, free up the threads, and it’s ready to use right off the build plate. 🚫 No Supports, No Glue: The model is optimized for FDM printing—no messy support removal ⚡ Quick Print: The simple, clever design…
This is a set of prints that will house Xprite 52026Ts , which I was able to find in an 8 pack. The light facades fit snugly into aluminum architectural U-channel that I got off McMaster , but will need to be weather sealed. I used a…
Těsnění do umyvadlové baterie - Novaservis Metalia 58001/1,0. V případě, že máte umyvadlový otvor větší než standardní, těsnící o-kroužek v balení nelze použít. Náhradní, větší o-kroužek dodávaný pro tento případ je kvůlu čtvercové…
EAF Bracket, Bearing Retainer/Spacer and Collar for the older Celestron C8 with Orange Pebble tube. I bought a similar design 5 years ago but, it never worked properly. I made some major changes in rigidity, functionality as well as this…
FR : support de spray mural , en deux partie pour que les vises ne soient pas apparentes. EN : Wall-mounted spray holder, in two parts so that the screws are not visible.
If you would like to customize the size, you must download the .f3z file, and then you can change the dimensions by going to Modify -> Change Parameters. Any reasonable dimension will work, but if it's too small/big, Fusion360 can error.…
A more refined version of the heat bed cable support for the Prusa Mini
Fork vise jaws for Marzocchi upside down fork as fitted on Triumph Speed Twin 1200 (2021-2024) 2 holes : one vertical, the other at an angle of 20 degrees. 53mm upper tube You can use 6 10x3mm magnets.
1:1 Scale Oculudentavis sculpture. recommend printing it at a finer layer height or with a resin printer. The files are pretty large, they may take a while to load. (I know that this creature is heavily debated between being a bird or…
*** I have revised this design again. I didn't like the original wrist angle and so I changed the grip tilt. Now the your wrist should be more naturally aligned. I also reinforced the fulcrum point to account for the increased angle.…
Needed new jaws for my 4 /12" Rigid vise. Printed these out of solid TPU and they bolt right on. May fit other vises, but Im do not know.
I wanted something softer than steel to hold certain projects in my shop, so I designed these jaw pads for my 7" Columbian wood vise. I printed them in PLA, and then did another set in TPU for an even softer grip. They work great!
Este modelo 3D representa a Diana , uno de los personajes más emblemáticos de la ciencia ficción televisiva de los años 80. En la serie V (1983), Diana es una de las líderes de los Visitantes, una especie alienígena reptiliana que llega a…
Simple and cute quick printing case for the Heltec E213 eInk node. There's even a little room for a battery if you're so inclined. Whipped this together for my desk and though I would share if anyone else with the same node wants it...…
