Counting matching models…
Aquí os dejo mi test de Curling que es una adaptación del que hizo McGybeer en su día y me pareció muy interesante. En este caso lo he modificado para tener voladizos de distintos tamaños y así poder evaluar más situaciones. Si queréis…
This is remix of schweiz9394's remix of FragrantAbyss's bullet puzzle . Its intended to be a puzzle giftbox with not too easy but not too hard maze to solve. In chamber you could put giftcard or small gift. I created new bootom part and…
Test de voladizos Control3D Desde Control 3D hemos creado un test definitivo, en el cual vamos a ver la capacidad de nuestra máquina a la hora de imprimir voladizos y puentes en varios ángulos. Los ajustes de impresión son muy sencillos:…
Set of TPU inserts to adapt Volador VX3/VX3.5 aluminum camera mount for DJI O4 camera.
made by Dr. Brett Carey and engineer Ben McCandless originally to benefit patients without health insurance. Measure the diameter and length of a patients wrist and re-size accordingly. Use the mirror function to turn this into a left…
Tištěno na tiskárně Prusa I3 MK0 - 3mmABS
tappo di chiusura per valvole dei pneumatici
Princip hlavolamu je jednoduchý, naskládat všechna čísla zpět na podložku - to ale už tak jednoduché není. Nápad to není můj, je to vytvořeno podle obrázku, který jsem zahlédl někde na Pinterestu.
4 modèles différents. Décoration de Noel style boule de Noel avec le Père Noel et ses rennes volant au-dessus de sapins, avec ou sans texte. impression avec une hauteur de couche à 0.2 et un remplissage à 20%. Vous pouvez choisir la…
Solution: 1. step 2. step 3. step (back) That's it!
Este test de voladizos se ha realizado después de mucho investigar y gracias a la experiencia aportada por @rudolf Es un test fijo a 75º. La idea de no hacer otro ángulo en este test es porque, cualquier impresora con una ventilación de…
GPS mount for FlyFish Volador VX5 for the original antenna mount, compatible with all GPS units with dimensions of 21x21mm. No screws are required to mount the module. Print settings: Material - TPU Infill - 50% Walls - 3
Dale vida a tu colección con este espectacular modelo 3D de Superman volando en versión chibi. Este diseño combina el carisma del personaje con un estilo adorable y detallado, ideal para impresión 3D. La figura muestra a Superman con su…
Print Settings Printer brand: Kingroon Printer: Kingroon KP3S Rafts: No Supports: No Resolution: 0.2 Infill: 100% Filament material: TPU Filament brand: Kingroon
Volante Audi RS disegnato con Fusion 360 Può essere un bell'oggetto da mettere sul mobile di casa tua. Semplice da stampare e nessun pezzo da assemblare. Primo volante di una serie.
use the trimmed vtx mount to have room for both fits as one assembly
Při tisku je vhodné barevně odlišit spodní část vnitřních dílků (puzzle) od vrchní.
Breathe a sigh of relief, this will work fine for their garbage FPV cam mount design. Print with 100% infill in TPU.
use the same conector thats on the tbs mambo sma kit power leads should feed trough the top
Volatile | Dying Light - tisknuto na Original Prusa MK4S - filament: PLA flashforge - spotřeba: 200g - doba tisku: 9:16 hod - výška: 20cm
FPV canopy for Volantex Ranger 2400 and Volantex Phoenix 2400. With 9g servo mount and designed to house DJI O3 air unit. It will also work with any other VTX since you can use zipties to mount VTX in place. This is a rough first version,…
100 % - 3x3 cm Recommended scale: 120% - 3,5x3,5 cm
Adjusted mount for the two antennas of the DJI O4 Air Unit Pro for the FlyFishRC Volador II (VD6 in my case) frame. Including screw-holes for the GPS-module. Antennas are in a 80° angle to each other, to get (close to) optimal range. I…
FlyFishRC Volador VX3.0 VX3.5 VX5 Vibration Dampers for 19mm Camera TPU. Found the original silicone ones are way to soft for a 19mm analogue camera. I couldn't find an STL online so i made one.
Super simple and compact tazer module. Parts i used: High voltage module: https://s.click.aliexpress.com/e/_dSZnwyn Lithium charging board: https://s.click.aliexpress.com/e/_dXTpFtH (Without the over current/overcharging protection) I…
Stredový kryt športového dobového Škoda volantu "Kolín" FB: https://www.facebook.com/KRDizajn Instagram: https://www.instagram.com/kr_design_sk/ Print instructions Material: Pet-G/ASA prípadne FLEXI
Ecrous de manœuvre M8 à 3 volants pour karting, outils de jardin comme les tondeuses ou autre. Convient parfaitement à la fixation du réservoir, pare chocs sur les karts. Il vous suffira d'ajouter un écrous M8 au centre une fois la pièce…
I've been playing the game dispatch recently and i've been really enjoying it lots of my friends have been talking about cosplaying characters from it, and i figured i may as well put this out there The model is scaled to be 140cm long I…
Print with TPU and tree support. Version 2 has a small overhang to protect the cam. The GPS is rotated 180deg to get the cable throught the top plate. Everything gets better with coffee! https://ko-fi.com/pixbalance
FlyFishRC Volador 2 VX5 - dual antenna holder (Waksnail Moonlight Kit)
M100 Mini GPS Holder For Flyfish Volador I provided the 3mf file to make it easier to make adjustment if you need to.
Print with TPU, no support needed. Everything gets better with coffee! https://ko-fi.com/pixbalance
Just modelled these to help protect my VX3.5 motors since I often times would crash in a way that would bend the bell on motor. I have not yet fully tested this designs performance in the air so please keep that in mind. You will need a…
GPS Mount made for VOLADOR II. It may be compatible with other drones. Printed on TPU 95A 20% infill
My customization of the popular toilet paper cloud, easy to print in two parts and to be wall mounted with double sided tape. Positioned diagonally, the print of each piece fits perfectly on the build plate of the Bambu Lab X1/P1P 3D…
zjednodusena kopie orginalu, jen tak narychlo splacana. Ma sve mouchy, ale co by clovek neudelal pro klid. Je treba ji utesnit prouzky samolepici penove pasky, aby to lepe tesnilo a neviklalo se to. Mozna to jeste upravim. Tiskl jsem z…
Camera mount for DJI O4 Air Unit Pro in FlyFishRC Volador II (VD6) frame. Camera angle adjustable from ~5° to 25°. Replacement for the original CNC-parts of the Volador frame. Full camera protection at 25°, no part of camera protrude from…
This is a basic model for Volantex Ranger 2400 and Volantex Phoenix 2400 canopies. It is my attempt to reproduce stock canopy form. This model is not suitable for printing as is - instead, use it to make your very own canopy! I keep this…
This stearing wheel knob is designed for stearing whell with outher diameter 365mm and 25mm diam in cut. The clamp is printable as a one piece, situated on plate according picture. The ball with pivot is printable on place also. Gap is…
Compact antenna and GPS mount for Volador VX3.5. The VTX antenna mount requires trimming down the plastic antenna tube to fit. Sized to fit the antennas from a dual antenna Walksnail VTX, but will also fit DJI O4 Pro antennas. Supports…
Simple capacitor holder for Flyfish Volador 3.5 and rotated FC, where power wires are on the front side of the drone.
A mount for the Radiomaster RP1 ELRS receiver for the Volador VX3.5 FPV drone. Fits on the underside or upperside of the frame. Hole diameter is 20mm. I used 6mm M2 screws for mounting, the 5mm M2 screws which came with the frame kit…
This is a mount for the Foxeer m10Q 180 for the FlyFishRC Volador VX5, that includes provision for an SMA mount and a USBC connector that can be wired for Walksnail Avatar
Volant modèle réduit Matière : ABS Gris argent Résolution : 0,20 mm Radeau : On Support : On
I've designed this tray to completely replace the stock, plywood one. It lets you balance and fly the plane with much larger batteries. You're gonna have to remove the wheel and the wheel cowling though. However, it pairs nicely with a…
Front GPS holder for the Volador II VX5 O3 FPV Freestyle T700 Frame by FlyFishRC. This GPS holder, made for 25 x 25 mm modules such as the Team Blacksheep M10Q, which also includes a magnetometer, uses the same hole pattern as the…
Aft GPS holder for the Volador II VX5 O3 FPV Freestyle T700 Frame by FlyFishRC. It mimics the concept of the default 3D-printed GPS holder included with the frame, but enlarged for a 25 x 25 mm GPS module, such as the Team Blacksheep…
A simple model to hold your GPS module in place. Should be printed only with TPU. Works with HGLRC M100-5883 M10 GPS Insert the module through the hole on the left side, then connect the wires.
The Urvolax UR73C carplay screen comes with a mount that you can glue to your dashboard. As it was bought to replace the stock Maps&More screen in a Skoda Citigo, I wanted to bolt it to the same place where the original screen was mounted…
I made this cover for my bosses racing team so they could mount the buttons in different places. there is also a backing plate with several holes to run the button wiring through. Id print it in ASA or ABS if your going to use it in a IRL…
After crushing my Cap I designed this to be able to mount it to one of stand offs I have a 35v 470uF cap. 3mf flies uploaded so you can make adjustments if you want.
Flyfish Volador VD5/VX5 O3 and GPS Mount Features: Designed for Flyfish Volador VD5 and VX5 All-in-one mount for the DJI O3 stock antenna and a micro GPS With and without the Omni Protection Print Settings Printer: Creality Ender 3…
V názvu každého STL je kolikrát se má vytisknout. Jedná se o předělávku dřevěné skládačky. Návod ke složení přiložen :-)
este es un test para los voladizos de tu impresora 3D
Se ha localizado una grieta cerca del tope producida por el continuo funcionamiento de la pieza, he diseñado una pieza similar con el calibre como herramienta de medición.
This FC plate replaces stock wooden plate and mounts Matek H743 Flight controller, its USB extender, optional buzzer, and two wing connectors like these . Lots of holes for cable routing using zipties. Been flying this for a year, works…
This is my attempt to recreate vertical stabilizer of Volantex Phoenix 2400 (Should fit Volantex Ranger 2400 too). You can print this if you want. Use filament piece for stab axis, glue some parts together with CA glue.
Originál se nám zničil a tak bylo třeba udělat nový.
EN: This is a valve to prevent the air inside the blind bathroom's moisture evacuation duct from flowing back into the house when the bathroom extractor fan is switched off. Backflow of air from ducts is a problem especially in modern…
Ce volant permet de remplacer le bouton d'un potentiomètre en lui donnant un aspect SteamPunk. Print Settings Printer Brand: Creality Printer: CR10S PRO Supports: Yes Category: Decor
Crashing my Volador VX3 FPV quadcopter repeatedly caused my camera to change angle or get damaged, so I designed this thing. It fits Walksnail Moonlight with filter, or any other 19 mm FPV camera at fixed angle of 30°. Integrated lens…
Button for Asetek streering wheel. Full replacement for standard (grey and orange) buttons. Possibility of printing with an FDM printer or using RESIN printer. For printing, turn the model upside down and print on the supports. To install…
PLA, 2 perimeters, 10% infill, 0.15 layer should be sufficient. part 01 - 3x part 02 - 2x part 03 - 1x The manual for assembling is attached in the pictures.
A beautiful minimalist painting of a Heron on the wall. Print Settings Printer Brand: Creality Printer: Ender-3 S1 Pro Rafts: No Supports: No Resolution: 0,2 mm Infill: 15% Filament: PLA Notes: Top/botton pattern - concentric Category: 2D…
For the Flyfish Volador VX3 / VX3.5 Single antenna mount lollipop style I have added a mount to hold a GPS unit on the rear, This is for an 18x18 GPS unit ( Im using the TBS m10 unit) Printed in TPU 0.2 layer 15%, I have attached the 3MF…
Cestino da Tavolo Minimalista Un cestino porta rifiuti compatto ed elegante, progettato per mantenere pulita la tua postazione di lavoro, il tavolo da cucito o il bancone della cucina. Grazie al suo design funzionale, si adatta…
original design is by FabianP on Cults 3D
This part replaces original plywood top tray in Volantex Phoenix RC glider to serve as a replacement and offer attachment for SpeedyBee F405 Wing Mini Flight controller, its Wi-Fi module, HGLRC M100-5883 GPS and XT-60 socket. Print with…
2 palette Audi pour une esthétique irréprochable
Propeller spinner cap for popular RC aircraft Volantex TrainStar in equal scale with side bolts mounting. No supports needed. For 6mm shaft Equal scale If you like it, please support me: Paypal: [email protected] Skrill:…
3D printed car freshener with refill option for volatile oils You need to 3D print these with more than 2 Perimeters (because of oil penetration): cylinder cover pull (optional) - the pull is for removing the wood easier You also need a…
After the Printables takedown of one of my Benchy cored models due to the original Benchy licence restrictions, I deleted ALL my Benchy cored models. With the recent release of the Benchy into the public domain it has opened the door to…
The small model is lighter but provides less protection, no TPU in view. The large model is heavier but provides more protection, slight TPU in view. Print laying flat on the side, infill density is up to you and your weight requirements.…
This part is printed in tpu and replaces the standard aluminum mount that comes with the frame. It provides more protection for longer camera's such as WS moonlight by mounting the camera further back in the frame. Note: If you have a…
Inspiration and History The Traditional DIY Chilean Kite 'Volantín' is a simple, fast printing and light structure inspired by the Chilean Volantín folkloric game and tradition. We sure did not invent the kite, but it became a very…
adjustable 04 pro camera, dual antenna mount, and top GPS mount made with TPU
A mount for the GEPRC 25x25mm GPS modules, which fits where the GoPro mount is intended to be. Tested with the Volador II and GEP-M1025Q, but most likely compatible with at least all the other Volador frames and GEP 25x25 gps modules.…
modelo reforzado para helice Volantex_Phoenix_propeller
Mounts for Walksnail VTX's specifically the Avatar HD v2. The camera mount fits both the standard and Pro and possibly the Moonlight camera. I have three camera mounts, only difference is the servo head alignment, hopefully one of them…
Info This part is a direct replacement for the flimsy tail bracket for a Volantex Phoenix 2400/2000. The 2400/2000 share the same body, so it should fit both. Print Tips It is recommended to print it as oriented (upside down with respect…
Pour remplacement du volant d'origine (système de vidange à câble ref. 30723098/3375537186303/3375537195763 qui présente une fragilité sur la section du volant qui reçoit le 6 pans en cas de résistance. Réalisable en PLA avec 2 couches de…
A bomb proof mount for a (happymodel) ep2 receiver. EDIT: I made a LITE version of the mount, It's less than half the volume and thus half the weight.
Obal: Tisk s podporami v rozlišení 0,16. PLA Výplň hlavolamu: Tisk s podporami v rozlišení 0,2; 2 stěny bez výplně. TPU Kulička: Tisk s podporami v rozlišení 0,16-0,08. PLA Označovací kolečko: Tisk bez podpor v rozlišení 0,08. PLA není…
You might break a sweat, you might wish for a third hand :) But once you succeed, you can torment your friends ;) I am not the original author of this puzzle. Although I created the 3D model, it is a copy of a wooden puzzle that I once…
Rubber mount for FPV Camera (HDZero & Runcam) for FlyFish Volador VX5/VX3.5. I constructed this based on my measurements with a broken caliper. Still didn't print it and test fit it.
I broke my Phoenix 2000 battery floor... too much fragile IMHO ! Here is a light version 3D printed. To fix it, position the floor in place, then drill a 1mm hole for each screw. And that's it Doesn't add weight to the nose. CG is…
Jednoduchá cedule nepovolaným vstup zakázán (zákaz vstupu) bez nutnosti MMU, AMS, atd..
With a small cut, can be fitted to rudder. Printed in TPU Perfect 3rd Person View I personally have put in some carbon tubes for air flow to the unit, as well as a tube for the antenna.
Camera frames to fit volador camera holes
This is a custom motor mount designed specifically for Sunnysky x3120, although i guess it will also fit any other sunnysky motor. This is intended to be used with stock metal plate & screws so you dont need to drill anything. Note that…
This is a four way 2g server horn, specifically designed for the Volantex RC Spitfire . I included the original fusion file as well.
remixed from: https://www.thingiverse.com/thing:6523720 and https://www.thingiverse.com/thing:6928153
The original motor mount for Volantex aircraft is crap, as any collision motor first cuts it clean off the rest of the fuselage. This motor mount replaces the entire nose section, providing strong support of the motor and better cooling.…
He diseñado estos botones para el volante Cammus C5 para darle un toque mas deportivo y algo de color y tambien tener los botones identificados. Estan nombrados para mi ajuste de botones y en mi idioma, quizas esto a ti no te concuerde…
