Counting matching models…
This is a Remix of the design by er2kien uploaded on thingiverse. The original design didn't fit well on my Voopoo DragX. I printed with supports. Note! Please have a look what filament you use and adjust the scale. With this filaments I…
Simple storage for two pods for voopoo argus Z. Let's try.
Ho realizzato questo supporto per sigaretta elettronica (Voopoo Argus/Argus Pro) compatibile con il vano portabicchieri
Keeps your vape plus few coins and more. With cutout for the charging cable. Could be a bit tighter. Still better than rattling in the cup. Will probably fit VW/Seat etc. (not confirmed yet). V3 - Gives you the option to put it in…
Made a case for the Voopoo Argus G vape kit so it is not too exposed when stored away. I found that often the pod would come loose and the liquid would leak. With this the pod will stay clean and secure on the vape. The vape can be use…
Here is a design I made to hold my vape (Voopoo drag 3) in the cup holder of my car (Ford Transit). Here is the different files I made : Simple case (base holder) can be useful to adapt it to another use. Fit the drag 3 perfectly and not…
Button guard for lazy people who suck on the death nipple so often that there is no time to lock or unlock with 5 clicks. I burned so many coils in my pocket with my phone leaning on the buttons, so i made this almost perfect button…
Say hello to the charging stand for the VooPoo Argus Pod System. The stand is designed to hold your pod in place while it charges, with a special place for the charging cable to be inserted between the "LH" and "RH" cable box parts and…
i designed this dust cover for the voopoo pnp pod, stil need to test print this, i am waiting on my flex fillament to arrive to print this Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: Yes Resolution: 200…
Voopoo Drag X steamer. Holder for Audi A1 for the center console ( middle small cup holder position )
Replacement tip for the Voopoo PNP X pod (tanks), use the o-rings from the old one or just put a little dot of superglue
I lost the origional magnetic cover for my voopoo drag vaper mod so i did some measurements and made a model that will friction fit the device. It looks much better than the origional now in my oppinion. For the hex pattern i printed the…
TPU/TPE case for neck stripe for VOOPOO Drag PRO X/S taller so it fits better
Do you keep your vape in your pocket? Are you getting trasshes on the heater? This simple plug for your e-cigarete will solve your problem! Construction - Hard plastic, fits tightly, fits perfectly to 0.02mm, it may slightly scratch the…
I was annoyed with my partner putting vape mod in cup holder and it constantly rattling around, leaking if left leaning for too long and worst of all: forcing me to hold any drinks when I'm a passenger because vape hogs one entire cup…
A POD Holder for the Drag X Vaporizer, enjoy it.
This model serves a 1x3 units sized stand for vape model from description. You can quite possibly fit other models. Cylinder size of bed is based on these sizes: Length of bed: 80mm Diameter of vape: 35mm So any vape under 35mm (cylinder…
Voopoo Doric small cap, easy print with FLEX filament (I used TPU) but useful to correctly cover the Voopoo head. Suggested to print with 0,15mm setting, really clean bed surface and using a TPU 98 or 95A shore.
21700 + 18650 batterys and 25.2x9mm holes (perfect fit on Voopoo Pods) Print Settings Rafts: No Supports: No Resolution: 0,2 Infill: 10% Category: Organization
Ladestation gedruckt mit Unterstützung und 20% Infill. Das Original USB C Kabel kann einfach von unten eingesteckt werden.
Cansado de tener mi Vaper lleno de mugre y desgastado he diseñado está funda para proteger mi nuevo Doric 20 y así evitar daños y suciedad. Diseñado en Fusion 360 y fundido en PLA, altura de capa 0.2 Sin soportes.
Tisknuto na PLA, 0,2mm
Easy to print stand for Voopoo Doric 20 electrical cigarette. Usefull while charging due to not usefull placing of USB-C Port. Printed in 0,3 layer hight.
This holder is made to hold 1 Voopoo Doric e-cigaret, with 3 pods supports and 4 e-liquids 50ml supports. I use it in a drawer, and I was tired of having my bottles and stuff falling aside every time I was closing this drawer. That's why…
DORIC 60 VOOPOO cap, to protect it from dust when you put your ecig in the pockets.
layer thickness --fine--0.1 fill density light 10 % programe matter control
Replacement of the standard coating for Drag S Category: Electronics
VooPoo VinciQ case … Easy print , no support.
a pratic holder for spare atomizer
VooPoo Drag X\S pro case magnet magnet 2x 10X2mm
Works for VM6 coils. Im not sure if others will fit.
It's just a simple sleeve for the doric 60 pro. You can see your juice, the leds, the bottom lock system is working. printed in pla 0.2 layer, with 2 walls, no support it protect just enough for my use. the PIP fil is ready to print, the…
I was tired of my vape falling over in the side pouch of my back pack leading to the bottles leaking a little juice and it just getting generally nasty in that pocket. Well it turns out I want one for my desk too so I don't need to hunt…
I have a couple of PNP pods and find they often weep a little when left for a while. To save them leaving a wet patch I created these simple stands to store spare pods when not in use. Print Settings Printer Brand: Creality Printer: Ender…
VOOPOO Doric cup for car. (15deg) Slot for two side tape
The Problem: The fake leather on your Voopoo Drag X / S side panel is peeling, bubbling, or just worn out. It looks ugly and makes the mod slippery. The Solution: A durable 3D‑printed drop‑in replacement that never wears down, resists…
Чехол для Voopoo vmate pro2 с крышкой на резинке , защищающая испаритель от пыли и насекомых . Есть вырез под : экран; кнопку переключения режимов; регулировку обдува ; зарядку. Для сборки потребуется маленькая резинка для волос или…
Just slide into the vape box. I managed to print it without any support material with PET-G filament.
My daughter wanted a stand for her vape while charging so it wouldn't fall off the shelf onto her head. Hope this helps someone out there.
Layer Height: 0.15 Supports: Yes For your purposes, I am attaching the Fusion 360 source files.
A convenient solution for those who have lost the standard cover or the device is badly scratched You need a rubber band
Чехол для Voopoo vmate pro2 с крышкой на резинке , защищающая испаритель от пыли и насекомых . Есть вырез под : экран; кнопку переключения режимов; регулировку обдува ; зарядку. Для сборки потребуется маленькая резинка для волос или…
Just slide into the vape box. I managed to print it without any support material with PET-G filament.
Print on PLA or PETG with printer default settings. Pause the printing at layer 765 and insert a steel ring with a thickness of 2 mm.
Easy box for 4 VooPoo cartiges (2ml) hole in hinge is for filament (1,75mm).
Cupholder adapter for VW cars, I originally printed this in black, blue and white filament
Very simple and functional Vape holder for the Voopoo Argus Z Voopoo Argus Z - 1 - will hold 2 x Vapes, 1 x Vape Juice Bottle, and either a slimline battery pack or spare pods Voopoo Argus Z - 2 - will hold 2 x Vapes More to follow -…
Fixer for the battery cover that no longer locks closed.
