Voopoo Argus G Vape Case
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Made a case for the Voopoo Argus G vape kit so it is not too exposed when stored away. I found that often the pod…
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 132
- Makes
- 0
- Views
- 1,165
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Made a case for the Voopoo Argus G vape kit so it is not too exposed when stored away.
I found that often the pod would come loose and the liquid would leak. With this the pod will stay clean and secure on the vape.
The vape can be use with the main case still on. I have included a cut out the charging port and the air intake, as well as a window for the screen. I have also put a small hole at the top of the cap so it not create a vacuum seal, otherwise the vape turns on whenever you take the cap off.
Besides the main case body and the cap, there are two rings that attach on each of them and act as the connector. This way you can print them in different colours as accents. You can superglue each of them to their appropriate parts but that would mean you would need to reprint the whole thing if you want to change them. Also, they should have a tight enough fit where you shouldn't need to do that in the first place.
Print Settings
Printer Brand:
ELEGOO
Printer:
ELEGOO NEPTUNE 4 Pro
Rafts:
No
Supports:
Yes
Resolution:
0.12
Infill:
100
Filament: Polymaker PLA Black
Notes:
Make sure the resolution is as low as possible (0.12-0.15) for better fit of the rings. You do not need to use supports for the main case but will need to for the rest of the parts (I recommend Tree supports).
If the fit between the rings is a bit tight, it will loosen with daily use. Do not sand it down or it will become too loose and will easily be coming off.
Category: Gadgets