7 models
Plate to hold lenses inside the BetaFPV VR03 FPV goggles as the goggles are smaller than all tested glasses frames. (Needed size is ~110mm) Print two plates - with the bed side of the pieces facing inwards. Needed as the is a chamber on…
Parts are easy and fast to print I used PLA and PLA+ for filament Lid for the case is snap on (you can use some CA-glue to hold it firmly). Battery has its own compartment in the bottom of the case, but I used some strips of duct tape to…
Use this plate to hold lenses inside the BetaFPV VR03 FPV goggles. Print two plates, screw together with lens inside and place in goggles. Compatible with lenses you can buy on Amazon using following link: KoKoBin 2 pacco Occhiali da…
I used the popular Eachine PRO58 RX Diversity 40CH receiver for this modification. The goal was to keep the receiver in the goggles functional while having the option to turn on an external receiver if needed. The external receiver…
The BetaFPV VR03 face hole is too narrow to work with all or most glasses. It is feasible to grind down old glasses lenses using a padded clamp and a sander with 80 grit paper. The original model was based on the observation that a small…
Adapted for this specific glasses: https://es.aliexpress.com/item/1005003269514025.html?spm=a2g0o.order_lis +4 goggles +4 worked great. Print twice, and screw together.
You will need to file the internal structure behind the right-side antenna hole for the switch to fit properly. Don't use super glue to fix the switch in place. The glue vapors seem to dissolve something within the switch and it will no…
