100 models
YOU WILL NEED THE KIT TO BUILD THIS: USA: Bearswares: https://bearswares.shop/products/vulture-mk3-by-mhp-arms?variant=42951208534129 Out of Darts: https://outofdarts.com/products/mhp-vulture-lever-action-springer-hardware-kit AUS:…
The MHP Vulture is a lever-action short dart spring-powered blaster remixed from MrHeathPants’ own Wrenfield MK-3 blaster design. Featuring a premium CNC-milled, black anodized aluminum lever and priming bars along with a unique…
Huge thank you to Printables user soozafone for creating my new obsession, Lucky 13 . I saw an amazing Doctor Octopus remix made by Printables user Cromulent ( https://www.printables.com/model/205015-doctor-octopus-aka-doc-ock-lucky-13 )…
If you want to buy me a coffee :) https://buymeacoffee.com/methanejuice BOM (on top of the Vulture kit): M3x25mm SHCS qty 7 M3x30mm SHCS qty 2 M3 Nuts qty 9 #4 Screws (3/8" Long) qty 14 5 walls and 99% gyroid for orange parts, 5 walls and…
more in depth summery the mask is not completely accurate and if you look it for to long it will being to look like a cheep bootleg, or you will convince yourself into thinking that it looks pretty good replica. its probably some where in…
The second villain from the Sinister Six, The Vulture. I had made a quick set of wings but wasn't happy with them so I started to scale down the Lucky 13 Vulture wings I had made previously when I saw the fantastic Mini 13: Wings that…
A magnetic fear tracker for Daggerheart in the style of birds perching on a rooftop. Prints with minimal supports, only the bird magnet holes require them. Ravens often represent tricksters in mythology, which makes them seem appropriate…
Vulture of the Void – Halloween Desk Guardian Perched ominously atop a cracked stone base, this vulture sculpture brings eerie elegance to your Halloween setup. Designed for minimal support printing, it features layered feathers, a…
Vulture model from Elite: Dangerous Model is split into two parts at the widest point and down the centre to permit better printing Point the two halves vertically at the seam This work is strictly fanart and not meant for commercial…
Freestanding Turkey Vulture modelled on my buddies at Cascades Raptor Center Originally designed for a macro-photo diorama, primary feathers and ankles are very thin. Shrinking the model is not recommended Designed for resin printing
Want to access even more models not found here in Prusa Printers? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my…
Made this for fun. May require some force for some parts assembly. Be sure to post a make! Category: Toys & Games
Halloween door corner Vulture and skelton
2 versions of files are included: pre-supported and unsupported. All parts have been prepared and tested for 3D printing. We recommend to print in resin. The Vultures Gang commander with 2 interchangeable right hands (chainsword, power…
A Zombie Giant Vulture. You can support me on https://www.patreon.com/Schlossbauer if you like my work. Category: Toys & Games
This is my last model from TaleSpin. Recommended only for fanatics. :D Pretty big one. Prints with minimal or no supports. There might be some tolerance issues with the joining pins but they should work. :) There are some untested…
SEE REMIX IF YOUR VULTURE KIT USES THE DRUM SPRING This is a full replacement for the entire front-assembly of the Vulture blaster. This means that every part of the breech, barrel, and magazine assembly have been redone. The only…
Cool keychain. I printed it with two different colors and it came out great. Scale to your preference. Printed at 0.12mm with PLA 100% Infill
Perched atop a weathered beast’s skull, the Desert Sentinel watches in silence, a symbol of nature’s unforgiving judgment. This highly detailed model captures the raw atmosphere of the wastelands — with the vulture’s sharp features and…
SUMMARY Howdy folks! Meet Grinchester, a quality-of-life remix of the Vulture by MrHeathPants. The main focus was printability tweaks and converting from heat set inserts to M3 nuts. I also made small changes to part tolerances and…
The vulture head of LEGO Legends of Chima. Jacob Quintana is the creator of this model. Jacob Quintana page: https://sketchfab.com/jacobq1004
Meet Victor. He’s a vulture that looks cute at first glance, but at night, he can show his dark side. However, there's no need to fear him, he’s kind and friendly to good people 🙂 If you'd like to sell prints of this model, join my paid…
I am moving from Thingiverse over here to Printables, and I have gotten a lot better at 3D modeling. I'm kinda embarrassed by the quality of my old stuff. I'll be posting a lot today, hope you enjoy
Wanted my Vulture build to have the fancy stock, but realized that the back of the Vulture is just slightly different. Narrowed the connection holes to be for the Vulture's M3 hardware (instead of smiley's #6 screws), added spacers to…
A more basic handguard for the MHP Vulture patterned after classic leverguns. It's not exactly the shape I wanted, but it got the job done. Recommend adding some fuzzy skin for grip.
Uses all M3 screws for connecting the parts together and to the main body of the Vulture. EDIT: Added files for stock
The Vulture V1/V2 Toolhead by GN500 The Vulture Toolhead is a compact, light direct drive toolhead for the Ender-3 and CR-10 3D printers. It utilizes the Creality Sprite SE Extruder, CR-Touch/BL-Touch, and a 5015 part cooling fan. If you…
an easily adjustable stock modification for MHPs Vulture blaster (use the quick change spring pin to adjust it) Posting makes is appreciated and feel free to ask questions :)
That black speck circling high above isn't a carrion bird; it's a living guillotine. Its feathers are fused into plates of razor-sharp obsidian , a perfect creature of brutal efficiency. It circles, patient as the sun itself, waiting for…
lets u clear jams and single shot reload while having pic rails :)
I shortend the Handguard and removed the "front magtube" and "rear barrel" because the Original was a bit too long for me. This reduces the capacity to 5+1. I also used the stock delete piece from @jjeeffff
Warcraft Rumble - Vultures, provided by Blizzard https://warcraftrumble.blizzard.com/en-gb/collection
If you enjoy my designs and would like to support my work, or get a commercial license to sell prints of my models — you can join me on Patreon: 👉 https://www.patreon.com/cw/AR3DP --- The CF Vulture is designed in a faceted geometric…
pretty simple model that combines the sight and the rail option does NOT use extra hardware Posting your makes is appreciated and feel free to ask questions :)
This Model is a Mini version of a Vulture Droid thats why I made this model. To bring the charm by small Brick Sets into bigger spheres. The Model can be printed in place and requires no building. Supports should be used otherwise the…
A new 3D figurine generated by AI, a Chibi Creepy Vulture. I print my models on a slightly ageing printer. I try to find the best quality/time ratio for my prints. I print these models in fairly small formats, and the quality of the…
Discover inner peace with this serene 3D printable vulture figurine that captures the unexpected zen of nature's most patient predator. This beautifully detailed STL model showcases a vulture in perfect meditation pose, complete with…
I was having inconsistent last dart feeding with the mag follower failing to push the head of the dart into the lifter, so I moved the space for the drum spring in the follower back so it would properly push darts all the way through.…
This is a remix of a remix to use the current constant spring that's included in the kits from Bear or OOD for the vulture. Shortened mag without a compression spring
An extra picatinny attachment point for a bayonet, flashlight, laser, etc Hardware: 2-4x M3x8 screws Posting your makes is appreciated and feel free to ask questions :)
Spring spacer for fine tuning your Vulture's fps. Scale vertically in slicer as necessary.
Vultures Keychain Print Settings Printer Brand: Anycubic Printer: Kossel Linear Plus **Supports:** No Filament: MAKO PETG Black Category: 3D Printer Accessories
Capture the powerful presence of this striking bird with this 3D printable STL model of a Cute Vulture on Rock. This distinctive figure is perfect for adding a touch of wild nature and unique character to your displays, dioramas, or…
This highly detailed vulture model captures the distinctive features of this powerful scavenger bird. From its hooked beak and bare neck to its layered wing feathers and sturdy talons, the sculpt emphasises anatomical accuracy and natural…
Asked MrHeathpants about making some modular tubes since the twist lock parts are easy to swap, but he said he's too lazy rn, so I spent a couple minutes cutting up the meshes for shorter copies. Parts tagged by how many darts lengths…
A simple sling mount for MHPs Vulture that only uses a single M3x8 screw (and some super glue if needed/wanted to make it not swivel and unscrew itself) Can be attached to any of the 5 points on the handguard Posting makes is appreciated…
If you enjoy my designs and would like to support my work, or get a commercial license to sell prints of my models — you can join me on Patreon: 👉 https://www.patreon.com/cw/AR3DP I’ll be gradually adding colored profiles for the Mini Zoo…
Mad Dog Prime, aka Vulture for Battletech This is one of my classic free miniature releases, originally shared on MyMiniFactory. I am bringing the original files to Printables for hobbyists to print, paint, and enjoy. Included files •…
I found the vulture's barrel retention was fairly weak with only the o rings and didn't print properly without supports. I didn't want to mar my barrel with grub screws, so I added in my preferred style of o ring barrel mounts. I…
This is my take on Vultureman from Thundercats. You may need to rescale this design to fit your needs.
I've seen a lot of vultures with imitation wood stocks (brown plastic). Personally i find that the grain adds something extra. So here you go, enjoy printing a long AMS project. (Little note, my vulture (the one pictured) uses a shorter…
A great Wall Art of a vulture. Do not forget LIKE and to upload your makes, thanks ! As it is very thin, I am not sure it can be easily scaled down, do it at your own risks ;-) I used Flux.1 AI, Copilot and Hotpot
Scaled for 28–32mm play , but resizable for 65mm or larger formats. Optimised for FDM printing on a 0.2 mm nozzle with 0.08–0.12 mm layer height. eSun PLA+ Supports: minimal; model is pre-posed with strong base connection for easier…
AMS ready but if you want you can print on a single color printer by doing the following filament swaps: Set the layer height to 0.08mm and a base layer of 0.16mm, only one wall and infill to 100% then: For the white mask one: Start with…
warcraft rumble beast vultures Category: Scans & Replicas
can be mounted on the left, right, or bottom of the handuard and does swivel a bit, I used an M3 8mm screw, but shorter would probably be better.
Have fun with this low poly vulture! Check out my profile for more low poly animals.
Vulture's stock BCAR just doesn't work, at lesat for me, so I made a quickstring that doesn't ruin the look of the vulture. The scar was designed for the 40mm barrel. The best twist rate I'd recommend is 8-10 cllicks from straight, at…
make the vulture leg pretty, made some quick examples but included base step files. If there are any issues with them let me know!
parametric model added too ig, just in case u want some special tolerances i found my vultures orings to be super tight so they did get an amazing seal but the prime was real stiff
Grabbed original Grip and Stock files from Vulture, modified them to accept the FPS Knob (Same one used in Smiley) "Skeleton stock" inspired by this - https://www.printables.com/model/1727302-smiley-wood-ish-skeleton-stock Knob files from…
why must a stock be a useless hunk of plastic? with this design you can hold a m2.5 allen key for quick disassembly, 2 pusher orings, 4 barrel orings, step files & f3d file included :) it requires a m3 thumbscrew below (you can 3d print…
This is just a replacement buttplate for the vulture/smiley fancy stock with a QD attach point at the bottom. There are anti-rotation posts inside the cup to help prevent twisting. Use the same print settings as the rest of the stock and…
This makes it harder to put together. You must attach the stock to the grip first, it takes some force to get it fitting in. Then put the spring in and the plunger after it. Use a stick to push the spring back so it is primed and remember…
Made from pics I found & liked. Models not perfect. Made to 150mm, re-size as needed. All made in STL & 3MF formats.
This is a blank cartridge intended to be used with any springer that takes shellington flypoint shells. Do NOT use these for the flypoint or any flywheeler, as they are not designed to shoot anything out of them. It is recommended to fill…
Yet another Playmobil part that we've managed to lose. This isn't an exact replica but it's pretty close. The fit is tight but it needs to be in order for them to stay in place. I've included the OpenSCAD file if you want to make…
Use pieces of your transparent filament of choice or acual fiber, I used green transparent PETG and it works great. Everything else is basically the same
bayonet mount for a tpu knife :) please dont hit people with the mount, floppy bits ok
Black Vulture Skull is an anatomical bird skull replica 3d model for display, study and collections, made as a 3d printable stl for fans searching Black Vulture Skull stl, vulture skull model, or animal skull anatomy decor. Use it for…
BUITRE con percha Alto: 9 cm. Tiempo impresión: 1 h 10 min Parámetros de impresión 3D FILAMENTO PLA DIA. BOQUILLA: 0,4 mm ALTURA CAPA: 0,2 mm TEMP. EXTRUSOR: 215 GRADOS TEMP. CAMA: 50 GRADOS
Griffon Vulture stl is a 3d printable model of a real bird-animal concept, designed for collectors, diorama makers, and educational display. Use it for wildlife themed tabletop decor, custom animal figurines, science learning visuals, or…
Robot Urubu – a cyberpunk take on Flamengo's famous vulture mascot. This is an unofficial fan-art figure. It is not affiliated with, endorsed by, or connected to Clube de Regatas do Flamengo. • Size: about 107 × 37 × 120 mm (scale it up…
Occasionally the dart carrier doesn't drop enough to let the dart be loaded from the tube. This lifter has a taller face so the bolt will force the carrier lower and hopefully solve your feeding issues.
it fith on smol plat :3 check step files for more info or smt
Rear irons sights use leftover holes on the front grip thing, and the cover replaces the old one. Print with the same settings as the Vulture. print the back plate out of a contrasting color. When assembling the cover, glue the back plate…
I've been playing a lot of COD WW2, and naturally I love using the lever action, and I just thought the scope design was awesome, so I wanted to recreate that with my vulture. You'll need 2 M3 heat set inserts, and I'm pretty sure I used…
This is a new model for the iron sight and picatinny rail mount for the MHP OOD Vulture blaster. This allows one to have the looks and function of picatinny rail while maintaining the original iron sights designed for the blaster.
This is a 3d printable model of the New World Vulture, a real bird animal collectible sculpt for display, education, and collecting. Use it for desktop and tabletop decor, biology and wildlife learning projects, dioramas, and…
Vultures Keychain Print Settings Printer Brand: Anycubic Printer: Kossel Linear Plus **Supports:** No Filament: MAKO PETG Black Category: 3D Printer Accessories
Capture the powerful presence of this striking bird with this 3D printable STL model of a Cute Vulture on Rock. This distinctive figure is perfect for adding a touch of wild nature and unique character to your displays, dioramas, or…
YOU WILL NEED THE KIT TO BUILD THIS: USA: Bearswares: https://bearswares.shop/products/vulture-mk3-by-mhp-arms?variant=42951208534129 Out of Darts: https://outofdarts.com/products/mhp-vulture-lever-action-springer-hardware-kit AUS:…
SEE REMIX IF YOUR VULTURE KIT USES THE DRUM SPRING This is a full replacement for the entire front-assembly of the Vulture blaster. This means that every part of the breech, barrel, and magazine assembly have been redone. The only…
I shortend the Handguard and removed the "front magtube" and "rear barrel" because the Original was a bit too long for me. This reduces the capacity to 5+1. I also used the stock delete piece from @jjeeffff
This highly detailed vulture model captures the distinctive features of this powerful scavenger bird. From its hooked beak and bare neck to its layered wing feathers and sturdy talons, the sculpt emphasises anatomical accuracy and natural…
This is a remix of a remix to use the current constant spring that's included in the kits from Bear or OOD for the vulture. Shortened mag without a compression spring
make the vulture leg pretty, made some quick examples but included base step files. If there are any issues with them let me know!
can be mounted on the left, right, or bottom of the handuard and does swivel a bit, I used an M3 8mm screw, but shorter would probably be better.
A more basic handguard for the MHP Vulture patterned after classic leverguns. It's not exactly the shape I wanted, but it got the job done. Recommend adding some fuzzy skin for grip.
Asked MrHeathpants about making some modular tubes since the twist lock parts are easy to swap, but he said he's too lazy rn, so I spent a couple minutes cutting up the meshes for shorter copies. Parts tagged by how many darts lengths…
If you want to buy me a coffee :) https://buymeacoffee.com/methanejuice BOM (on top of the Vulture kit): M3x25mm SHCS qty 7 M3x30mm SHCS qty 2 M3 Nuts qty 9 #4 Screws (3/8" Long) qty 14 5 walls and 99% gyroid for orange parts, 5 walls and…
