Counting matching models…
See Zip file for all files including STL & STEP. ---Citations: Inspired by the Recovery Tactical MG9 Angled Mag Pouch. ---Description: Holds a mag, at an angle. Designed for the Taurus TX22. Mag release is ambidextrous. ---Variants: A:…
Adapter is modular, so it's easy to adjust separate parts, or print it in different colors. No glue or supports needed. PrusaSlicer warns about print stability issues. Reason is two small parts of perimeter of the duct module, just before…
STL file of the legendary Sony VX1000 loved by all skaters.
Vesa adapter for Asus VX27 monitor. Print with higher Infill (~40% for PLA) and/or PETG.
Will fit the original button and will replace the transparent piece. Note: can be printed in any color transparent is not required. Printed with PETG 0.2, to have a bit of flex.
KRUPS GVX2 replacement bevel gear Recently my coarseness selector knob (or as KRUPS refers to it, the “ground coffee finesse selector” on the side of the grinder would no longer rotate. I disassembled the grinder to find that several…
Circular support base for ASUS VX239 display monitor (or your display if it fits) It is printed upside down without supports. Designed in Freecad, sources included.
Tweeter Door Pods The face Tweeters towards the driver and passenger
I gave my daughter quite a nice coffee grinder. It appeared 6 months later during an apartment move in the "ditch" bin; "It never worked after the first day". Turns out the grind container has a LID that interlocks the grinder; the…
Probably only works for resin printers due to its small details.
A bracket to neatly mount a TP-Link VX231x Wi-Fi 6 Modem Router inside a Hager VU36NW multimedia distribution box. Before you comment : I don't use the Wi-Fi of this modem, it is turned off. I use a separate Wi-Fi Mesh system (TP-Link…
Button for Krups GVX242 coffee grinder. Take it apart and replace the button with this and it'll work as before.
A bracket that provides a proper fixture of the Chiclew Scooter bag to a VMAX New VX2 (Hub/Gear). Tighten the screws only until the bracket is properly seated. A gap between the clamp and the slider parts is intentional and part of the…
A wall mount for TP-Link VX231v. The short brackets maintain the dimensions of the original design from @bensen . The longer version is designed to mount the router above its power supply.
The retaining clip of my S2 Lotus side repeater lamp broke off. I didn't want to wait or to pay more in shipping than the price of this repeater. So, I design this clip that slides over the broken one and that is hold in place by the bulb…
The geometry of my results of measurements of the VMAX New VX2 (Gear/Hub) steering strut. It allows to design own parts in CAD for the E-Scooter such as brackets for bags or locks If you have any comments, suggestions or similar, you are…
Boton para molinillo de cafe Krups, ajusta bastante bien y se puede incluir el accesorio original transparente para que ilumine como el original
in the picture, i used the settings: 0.4mm nozzle 0.2mm layer height wall loops: 2 material: BambuLab TPU 95A HF with the 95A profile (instead of the 95A HF profile)
Kit de réparation pour phares Opel Speedster a coller ou a visser en fonction de la version choisie. Pour la colle, la Cyanolit ou préférence epoxy. Pour la version a visser il faut une vis M5 avec tête fraisée diam de la tête 7mm Prévoir…
A monitor stand with a 2mm lip and a hole for storage. Paint supports under the top of the storage hole and use lightning or another adaptive infill. just standard for your printer other than that. Printed on a K2 plus.
The orcaslicer .3mf file contains the actual best settings, which I used successfully. If you're not sure how to set "negative volumes" in your slicer, use the .stl files and set the print settings manually, because it is important to…
based on modification of Shure BLX2 Battery Case
Description ______________________________________________________________ (EN) DOSING CONTAINER FOR KRUPS GVX242 GRINDER (MOKA POT EDITION) A simple, purely functional replacement for the stock grinder bin. This model was created for one…
I’m sharing the OpenSCAD files for a custom monitor riser designed for the ASUS VX279. I’m not sure how common this particular monitor is, but perhaps someone else will find the design useful. The VX279 is an older monitor without height…
UPDATE 2: Added a spring-loaded insert that will adjust based on your container's width! You will need a spring (10 mm in diameter, length based on your preferred "stiffness" of the clamp) and a bolt for it to work! UPDATE: Increased the…
This is a replacement for the lower part of the rear cupholder. You can just push out the old one and glue this one in
See Zip file for all files including STL & STEP. ---Citations: Inspired by the Recovery Tactical MG9 Angled Mag Pouch. ---Description: Holds a mag, at an angle. Designed for the Taurus TX22. Mag release is ambidextrous. ---Variants: A:…
A bracket that provides a proper fixture of the Chiclew Scooter bag to a VMAX New VX2 (Hub/Gear). Tighten the screws only until the bracket is properly seated. A gap between the clamp and the slider parts is intentional and part of the…
The geometry of my results of measurements of the VMAX New VX2 (Gear/Hub) steering strut. It allows to design own parts in CAD for the E-Scooter such as brackets for bags or locks If you have any comments, suggestions or similar, you are…
The orcaslicer .3mf file contains the actual best settings, which I used successfully. If you're not sure how to set "negative volumes" in your slicer, use the .stl files and set the print settings manually, because it is important to…
Simple calibration jig for the NavX2-MXP for calibrating the gyro scale factor ratio. Clamp the alignment frame to a flat table. Place the NavX2-MXP into the holder. Use the holder and the alignment frame to complete the calibration.…
Designed to fit an Hola Music stand ~28mm diameter. This clip has a nice snug fit to it. I printed it in PETG-CF to give it some flexibility, but I think any material would work.
