75 models
Viaduct rail compatible with BRIO and IKEA wooden rails. Complete extended set contains: Straight Tracks Medium Straight Track - A Short Straight Track - A1 Mini Straight Track - A2 Mini Straight Track - B2 Mini Straight Track - C2…
Print approx. €5.19–€6.34 excl. taxPreliminary estimate for PETGSource material: PET
Kitchen Stove Knob model is based on @Weedjesus_350271 CAD file and modified for W10844787. I printed it in PLA in Prusament Galaxy Gray
Print approx. €1.42–€1.73 excl. taxPreliminary estimate for one variant
i didn't like the original butt pad “wings” so i adapted/designed my own.
Print approx. €1.04–€1.27 excl. taxPreliminary estimate for PETGSource material: PET
2 lids. Best to print them “standing up” to maximize strength in the tabs.
Print approx. €1.41–€1.72 excl. taxPreliminary estimate for one variant
AgustaWestland AW101 The AgustaWestland AW101 is a medium-lift helicopter in military and civil use. First flown in 1987, it was developed by a joint venture between Westland Helicopters in the United Kingdom and Agusta in Italy in…
Gewehrständer für die Weihrauch HW100
It spreads the tension of big/heavy antennas (W100RX2 added since its a great antenna and i have it now) away from the SMA onto the case. I got inspired by https://www.reddit.com/r/hackrf/comments/1l9c72m/hackrf_h4m_antenna_mod/ .
Replacement tine pivot clip used for some Jenn-Air, Kenmore, KitchenAid, LG, Maytag, and Whirlpool dishwasher models. Directly Replaces: WPW10082853, W10082853, WPW10082853VP, SAPW10082853, 1446946, AP6014920, AP4262208, AH1734891,…
Print this with the face laying on the bed. I recommend .15 or thinner layers to get enough material down. This is an application where a LESS stiff material like PETG is probably better than PLA. I have had good luck with all sorts of…
Original plastic control knobs on my electric stove top started to crack at the stem where it attaches to the metal shaft. Replacement knobs are expensive - too expensive! I designed a replacement stem (all you need is to pull the metal…
Weihrauch HW100 comes without any endcap on the threaded part on the barrel so there is a risk of damaging the crown or the threads when moderator is not attached This endcap covers all the threads and the crown. There is a hole at the…
Pen stand for the Huion PW100 (H640P, H950P, H1060P, H1161, H610 Pro V2, HS64, HS610, Inspiroy Ink H320M). Supports right-side-up or upside-down orientation Space for all 18 spare nibs that came with it (mine anyway) Space for the nib…
Als Ersatz für beschädigte oder abgerissen Verschlüsse an den Wasserbehältern. Auf der Seite liegend drucken mit Support. As a replacement for damaged or torn seals on the water containers. Print it sideways. Nearly every quality does its…
The Mercedes-Benz 600, also known as the W100, was a state-as-art vehicle crafted by the Daimler-Benz during the 1960s and 1970s. This stylish vehicle was used worldwide for and by the upper echelons. It served as an epitome of…
print the the insert with the designated color the metal ring is a soldered metal wire to have an endless look prepare the hole afterwards and live at your car with a file to fit you screw precisely
Protect your e-bike computer from crash damage and trail scratches with this low-profile protective bumper case. This model is a friction-fit "sock" that slides directly over the display body to absorb impacts without blocking the screen…
We had to replace a stove knob. This is a remix from the one from millerontap, which was very close to what I needed but not exactly right for my WCG55US0HS cooktop. The knob I'm trying to replace has a W10850010 stamped on the bottom.…
Lets you wall mount your MW100 or MW101 and it's probe to the wall. May fit other Milwaukee meters too like the MW301 MW302 MW401 MW402 and MW500 that have similar body and probes.
I bought a new speaker set from Monitor Audio and am very happy with it. However, I had to notice that the hard plastic feet of the subwoofer caused the subwoofer to slide around on my parquet floor when there was extreme bass. That's why…
You will need 4 slides (2 doors!) If they break again: reprint! Use PETG (PLA will melt in summer)
I made this last year to replace the original gear that broke on the rail of my freezer drawer since I was unable to find the part online without purchasing the complete rail. My fridge is the KitchenAid /Whirlpool (W10772358) five door…
Having dropped and lost the SET button for a Sennheiser EW100 G2 wireless mic pack, I designed this as a replacement. It's not quite as nice as the real switch which includes some elastomer but it works. I used a 0.25mm nozzle with PLA on…
Sony ICF-SW10 Battery bay cap. Need supports for the 3 pins
A wall mount for the Milwaukeen MW102 pH Meter, and may also fit other models of Milwaukee meter (MW100, MW101) Uses 6G timber screws or M4 (8/36 inch) CSK bolts to mount to walls or panels. There are three in-line mounting holes for…
I have a Ride1Up Roadster V2 ebike that uses this display that is somewhat common on other ebikes. But the problem with it is the plastic is brittle and the clamp is just a bit smaller than my handlebar so you can't really tighten in all…
This is a basic enclosure to house the Meshnology W10 LoRa AIoT development board plus the screen that it comes with. I bought one of these kits on Amazon and couldn't find that anyone had designed a case for it yet, so I did. This is…
Gridfinity holder for a Surecom SW102 SWR Meter. Holds 3 RF (Type N or PL) adapters in a 2 x 3 grid.
Requires 20x6x2 magnets (same as Prusa bed) to be secured with super glue. 6 magnets for the pH meter mount. 4 magnets for the probe mount. Cadquery source included.
Safely wall mount Aqara W100 Climate Sensor using two poster size command strips. Includes versions with alternate mounts, two holes 40mm apart, and 4 x "3mm x 10mm" magnets. For stability, since the button pushes are on the edge of the…
I created this as a template to pre-drill the holes to mount the sub with wood inserts.
needs heat inserts! plenty strong with them. get from m2 to m6 assorted box with flush screws also assorted box
Container, lid, and lid gasket (print in TPU) to suit Wagner Paint Sprayers, series W100 W150 W200 W300 (e.g. W350 which I have). I would highly recommend sealing the inside of the container with epoxy resin. I used 24g resin and 8g…
This was printed with Prusament ASA filament in order to hold up to the temperatures inside a dishwasher. At the time of upload, I have ran the dishwasher almost daily for a couple weeks or so and it shows no sign of deformation. Due to…
This is to replace the track that runs between the two center crispers, works with some Whirlpool, KitchenAid, Maytag, Jenn-Air, Amana, Inglis, and Magic Chef models of fridges. White - 13.5" long
I printed it with support. If the cap does not fit perfectly because the screws have tolerances, just scale it. There is 5mm space for 20mm diameter washers. I needed this for two washers.
Bracket to put SW102 display lower on handlebars, to avoid damages.
использовал кнопку без фиксации, для экономии заряда, батарейный блок садится на пенёк и плавится для удержания.
I used measurements from a damaged OEM part to create this printable version. I iterated through a few printed versions until I got one that worked well enough for my purposes. It's a bit finicky in that you can crack the screw posts if…
Perfect pot for plants. prevents overwatering and aerates the roots. improves root development.
The original model had a cracked fork on the right earpad. To avoid waiting for a replacement part to be shipped from the US to Ukraine, I decided to create a functional replacement.
Updates 07/2025: Made the rollers and clips slightly deeper to avoid occasional slips from the rail (clip v1.9/roller v1.5). Description Modified wheels/rollers for Midea SF 5.45NW10C dishwashers to increase the clearance between the…
So the hinge on my Eggrider broke and I needed a way to fix it. The protector I remixed worked as a good reference for making this holder, even though my Eggrider model does not fit the original part, due to being the older(?) offset…
The holder can be printed from any material. No supports are necessary when the model is placed on the build plate with the foot facing down. A layer height of approx. 0.15mm is recommended.
The holder can be printed from any material. No supports are necessary when the model is placed on the build plate with the foot facing down. A layer height of approx. 0.15mm is recommended.
Ecowitt Gw1000, GW1100, GW1200 IOT Wi-Fi Gateway with Built-in Temperature/Humidity desk stand holder. USB cable end size: 18mm wide x 10mm high x 26mm long Several temporary supports in the cable opening that can be easily removed with a…
This is a mount I designed to place the Eggrider V2 display directly above the left (or right) handle of my Catrike Dumont. It goes into the end of a 7/8" tube and should work for other trikes that use 7/8' handles. I wanted my display to…
It is designed for 2 or 3 9 x 18 x 5mm magnets designed
Keys for Wurlitzer jukeboxes. RW95 fits 2700 RW100 fits 3300 Print 100% infill in keyway. No support needed when key lays flat and cross section is in "W" shape. Category: Parts
Our Whirlpool front load washer had a drum baffle (Whirlpool Part Number WPW10283356) fall off during the course of normal laundry. This model is not an identical replacement, but has worked rather well as a replacement in our washer. I…
People RE-W1012 Temperature and humidity Sensor
Replacement throat plate / insert for the Powerplus POW107 scroll saw I also created a plate with more support and a smaller hole for fine jobs where you don't need to angle the table.
This is a remix of conleth's W100 wall mount, with an open top and center retention pin rather than full surround snap-in retention. The hold of the original was too tight for my liking, making it a challenge to remove when performing…
Upgraded Top Rack Assembly uses screws to hold the wheels in place. Over time, the plastic axle deteriorates due to heat and chemicals. This model will allow you to print your own replacements (you won't need to buy the full replacement…
Obal na tablet se skládá ze dvou částí. První část obsahuje packy, druhá část obsahuje otvory. Stačí obě části nasadit na tablet a mírným tlakem proti sobě části secvaknout. Při tisku části s packami je vhodné pod packy umístit podpěry.
503 adapter to mount the Aqara W100 thermostat using the original keyhole.
Case for Tilswall W106S glue gun and accessories. I used M3 x 0.5 x 30mm Socket head cap screws but any M3 30mm should work fine. You'll need 6 total, tow for the hinges, two for the locking clips to rotate on, and two to latch onto to…
Absolutely impressive: a layer thickness of 0.05mm or even better - but absolutely annoying: you're trying to start a jet plane every time you run a print... even vacuuming the room is more silent than this box! Knowing the guys from…
Sharpie W10 Permanent marker holder for the Ikea Skadis board. Hole is 20.5mm and 50mm deep so can be used for other things too. Enjoy
A modified Philips OneBlade stand from goldoseb for use with the Panasonic Dentacare EW1031 sonic toothbrush. The factory charger with stand is nice, but I needed something smaller. Print Settings Printer Brand: Creality Printer: Ender 3…
Siku Rad Ersatz für LKW10 Der Reifen kann aufgeklappt (Filmscharnier angedruckt) auf die Achse geschoben werden und dann zusammen geklebt werden (zB Uhu Hart oder Sekundenkleber) PLA oder PETG Layer: 0,2mm kein Support
a replacement air filter for a Mercedes w108 / W109. for 3mf change infill density for coarser or finer filter. for stl scale to 94.28% remove top and bottom layers set perimeters to 10
Mouse Droid (MSE-6-series Repair Droid) - Black - Dark Bluish Gray, Open Stud Wheels sw1004 Droid Should be scale up to 400% in order to have good results. Building instructions This droid is present in the building instructions for LEGO…
Needed to mount Gaciron W10-BS smart tail light on flat surface so I came up with this neat holder that still allows all functionality and water resistance of the light! It's removable for charging and ambient light sensor is still…
I got a tilswell glue gun and there were not any gridfinity bases for it. lightning101 has a very nice little case for it so I remixed the bottom of it into a 4x6 gridfinity base.
Toyota MR2 bonnet badge for First Generation/MK1: W10 (1984–1989). Not for use on vehicle. For display only. My models are free but if you'd like to buy me a coffee that would be greatly appreciated. Thanks. Note that the corner locating…
This is a specially designed desktop stand for the Huion PW100 stylus, which is used with many popular tablets such as the Huion Inspiroy H640P, H950P, H1060P, HS610, and others. The design is compact and stable. The model shown in the…
Ecowitt Gw1000, GW1100, GW1200 IOT Wi-Fi Gateway with Built-in Temperature/Humidity desk stand holder. USB cable end size: 18mm wide x 10mm high x 26mm long Several temporary supports in the cable opening that can be easily removed with a…
Safely wall mount Aqara W100 Climate Sensor using two poster size command strips. Includes versions with alternate mounts, two holes 40mm apart, and 4 x "3mm x 10mm" magnets. For stability, since the button pushes are on the edge of the…
Case for Tilswall W106S glue gun and accessories. I used M3 x 0.5 x 30mm Socket head cap screws but any M3 30mm should work fine. You'll need 6 total, tow for the hinges, two for the locking clips to rotate on, and two to latch onto to…
Container, lid, and lid gasket (print in TPU) to suit Wagner Paint Sprayers, series W100 W150 W200 W300 (e.g. W350 which I have). I would highly recommend sealing the inside of the container with epoxy resin. I used 24g resin and 8g…
Upgraded Top Rack Assembly uses screws to hold the wheels in place. Over time, the plastic axle deteriorates due to heat and chemicals. This model will allow you to print your own replacements (you won't need to buy the full replacement…
