207 models
Viaduct rail compatible with BRIO and IKEA wooden rails. Complete extended set contains: Straight Tracks Medium Straight Track - A Short Straight Track - A1 Mini Straight Track - A2 Mini Straight Track - B2 Mini Straight Track - C2…
Print approx. €3.53–€4.31 excl. taxPreliminary estimate for one variant
For fixing M2 module For fixing M2-M3 panels
Print approx. €0.28–€0.34 excl. taxPreliminary estimate for PETGSource material: PET
For fixing module screw - M2, for fixing panels - M2 or M3
Print approx. €0.18–€0.22 excl. taxPreliminary estimate for PETGSource material: PET
Outdor camera holder Xiaomi CW300 for a pole or tree with a diameter of 12 cm, for an outdoor socket box fastening using 16 mm stainless steel straps and clips
Print approx. €1.07–€1.31 excl. taxPreliminary estimate for PETGSource material: PET
fixation with glue
Print approx. €0.71–€0.86 excl. taxPreliminary estimate for PETGSource material: PET
This funnel fits perfectly into the dishwasher salt intake for the Cookology CMDW3WH. The narrow part of the funnel is 36mm in diameter (outer). No supports needed. License info: I have marked this model "non-commercial", but I would like…
Print approx. €1.89–€2.31 excl. taxPreliminary estimate for one variant
For the 2025 Tesla Model 3/Y, a shield around the camera was added . This is a remodel of the Model Y 2023 Berlin custom version that: Smooths out the walls to be circles instead of polygons. Fixes the bottom part of the shield not being…
As seen on YouTube: Disclaimer: This is an acoustic model. As such, it does not scale, nor is it compatible with drivers other than the ones specified. Scaling / incorrect driver(s) will result in significantly diminished performance.
As seen on YouTube: Disclaimer: This is an acoustic model. As such, it does not scale, nor is it compatible with drivers other than the ones specified. Scaling / incorrect driver(s) will result in significantly diminished performance.
As seen on YouTube: Disclaimer: This is an acoustic model. As such, it does not scale, nor is it compatible with drivers other than the ones specified. Scaling / incorrect driver(s) will result in significantly diminished performance.
I'm switching to a standing desk and bought a mount to hold my monitor and other accessories off the table. I either threw away the original adapter or my monitor didn't come with it, so I searched online for options to purchase. The only…
I generated the STLs that correspond to the different cases: Bottom : WIthout RJ12 port : CYD_Dial_JC2432W328C_bottom_without_RJ12.stl RJ12 on rounded side : CYD_Dial_JC2432W328C_bottom_RJ12_rounded_side.stl RJ12 on squared side :…
This wall mounted bracket is for an AT&T BGW320 Fiber Modem. It allows you to mount your modem on the wall securely. It includes the mount shelf with retaining tabs, a top clip, and an optional power supply mount which clips to the…
I couldnt find a shroud for this specific GPU model so designed one myself. You can revert this mod without trace in case you want to sell the GPU. Printing: Depending on the printer the shroud could be too big to fit horizontally. Either…
I needed a key for a Toyota roof cross bar lock, so I made one. The keycode is 82, as shown in the photo (the number on the lock). This key is for Toyota part number PW301-02009. Category: Automotive
The enclosure has a volume of approx. 3.15 liters. The port was tuned to 89 Hz with a slight dip in response above that according to WinISD. The dip can be corrected with an equalizer at 175 Hz +1.5 dB (Q=1.0). With these settings, the…
I drew a quick housing for the mentioned temperature controller. It has super simple design, no screw holes. You should use hot glue to fix it onto fridge or whatever. Or design holes if you need. (Glue is strong enough tbh and don't…
Slight modification to the riser by impozey. Increased depth of 3mm as I have a light strip on the back of my monitor preventing the weight from sitting flush with the back of the monitor. https://www.thingiverse.com/thing:4931271…
This is a remix of the excellent VESA 100 spacer created by FredCo as the original was a bit too small to fit into the back of the my Dell/Alienware AW3225QF and allow fitment to the mounting bracket. This remix is 13.4mm deep - the…
This is intended for: Toyota MR2 ZZW30 (mk3 , w30, etc.) MR2 Roadster (Europe) MR2 Spyder (USA) MRS (Japan) My shifter had a lot of wiggle sideways, the "ball" of the shifter rod has a lot of room between the frame and the ball itself,…
Needed materials: - https://www.amazon.com/gp/product/B0776PY5JK/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 -(SW3518) https://www.aliexpress.com/item/1005001682681687.html?spm=a2g0o.order_list.order_list_main.10.35981802laQqxG -(4)…
module holder (SW3516 or SW3518) with screw clamp For a 27-30mm hole for mounting P.S.: if the module falls out of your model, use glue type B7000, B8000, T7000 or others Changes in the update: (v2 update 1-Feb-2025) The shape of the nut…
This is a custom shroud for the Zotac RTX 3070ti Trinity GPU, using Arctic F9 PWM fans. It is possible this will work with other Zotac 30 series Trinity cards, but I cannot confirm. The stock card is undercooled and the fans are badly…
UPDATE: i got a new w3230 that actually does 500c an when i tried to put it in the lite case i had printed it would fit but the clips on the sides was so tight i ended up breaking the case so i made some changes to the model, have it…
Due to its odd triangular profile, a webcam will not sit well atop the Alienware AW3420DW. This is a simple mount that provides a mounting surface. This was designed to fit the mount used by the logitech brio, 920, 922, 925, 930 and any…
If you get Fiber internet from AT&T and they give you a BGW320 modem/router this holder will allow you to wall-mount the power supply. The install tech told me the power adapter can interfere with the WiFi signal if placed too close to…
This is a simple W3230 Thermostat mount for Prusa Enclosure. Example Thermostat: https://www.amazon.de/gp/product/B07RHDS2RN/
This is a quick Tinkercad design to solve the issue of the Logitech Brio 4K Camera mount covering a small amount of the top of the Alienware AW3423DW OLED Gaming Monitor. I used Prusa PETG in Black. Pictures are in draft mode but works…
My original fans where starting to making bearing noises, so I made these brackets to allow me to install whatever 120mm or 140mm fans I wanted. This bracket allows installation of 2x120mm or 2x140mm fans. This bracket will make the card…
Description: This is a custom-designed enclosure for the SW3518 module , available in two wall thickness options : 2mm for added durability and 1.6mm for faster printing and lighter applications. Key Features: Screwless, Sealed Design :…
I love my FW3A and I often use it to light whatever I'm working on, but that requires me to give up one hand for the flashlight. Well, I designed this to hold the flashlight for me in any position that I want. The design doesn't use any…
Una caja simple con alojamiento para un termostato w3230 y un interruptor de corte. En mi casi el interruptor es para la iluminación LED del gabinete. Por la parte trasera tiene la salida para la sonda y alojamiento para 2 conectores…
Simple model for housing W3230 thermostat module.
Just a simple way to keep your headphones from falling. I designed it for Earfun TW300 but it should be compatible with other ear canal headphones. For best comfort print it from some flexible filament like TPU and then smooth it with…
History An early radial engine was the three-cylinder Anzani , originally built as a W3 configuration, one of which powered Louis Blériot 's Blériot XI across the English Channel . Before 1914, Alessandro Anzani had developed radial…
If you want to fill up your oil without having to awkwardly hold a regular funnel or risk spilling oil everywhere, then this is a must have item. This funnel sits snugly in the filling port of your 1ZZ-FE engine while not interfering with…
Warning Only 5/6 tread types have been tested by a print ; but I am confidant for the most of the other ones. Printing According your project (weight) and your TPU filament type (98A, 95A, …) chose a classic tyre or a reinforced one (with…
what does the MKIISD update mean? the main update and why these are called MKIISD are that I took some improvements from the FGC9 SD and placed in the MKII shroud models that I designed. but keep in mind the are still made to just work…
Adapter that secures the LM18-LSI sensor lens, for the PMW3610 sensor, when used with the original BastardKB Charybdis trackball assembly.
I bought a Dell USB DVD Drive, Model DW316, and had nowhere to put it on my desk, so I designed a mount to go under my desk. Should print without any supports, gets held on with basic screws. I have included the *.step file as well so…
This wall mounted bracket is for an AT&T BGW320 Fiber Modem. It allows you to mount your modem on the wall securely. It includes the mount shelf with retaining tabs, a top clip, and an optional power supply mount which clips to the…
Old gasket was broke, I redrew and reprinted a new on in TPU. Pretty easy design, high efficiency. TinkerCad → Voron 0.4 → TPU → fire and forget. Explore my other Printables: https://www.printables.com/de/@Tritschi
Für die Montage braucht Ihr einen Kabelbinder (140x3,5mm, 1,2mm dick). Gewinde M20x1,5 braucht keine Nachbearbeitung. Schlüsselweite 30mm Konturen → 3 Decke → 5 Boden → 5 Erste Schicht → 0,2mm Variable Schichthöhe Stützen → Nur für…
Warning Only 5/6 tread types have been tested by a print ; but I am confidant for the most of the other ones. Printing According your project (weight) and your TPU filament type (98A, 95A, …) chose a classic tyre or a reinforced one (with…
This wall mount allows for your Giraffe AW30 garden hose reel to rotate a full 180 degrees. Mounting holes are identical to the original. Print in PetG with 35% infill.
Nozzle: 0.6mm for best results Material: PLA, ABS Supports: Yes Driver: Tang Band W3 1876s (ND90/91 version will be added later) Radiators: Dayton ND90-PR Amplifier: Hifidiy live 2.1 amplifier from Aliexpress. Any version will work, but…
Housing for the SW3518 charger module. Printed in pp gf30 / abs / petg - window will need to be clear for the led to shine through. Supports needed for the main housing, 20% infill Housing 35 mins / cover 23 mins / window 2 mins. Needs:…
One night, during a company dinner. Spawned an idea for this creation. Clicking from beyond the grave, your brass nozzle returns! (No, it doesn't) This Coffin Box fits a standard Cherry MX keyboard switch. Use whatever key switch gives…
Mich hat immer gestört, dass ich die Hörmann Fernbedienung HSE 4 BiSecure für unser Garagentor in unserem Toyota MR2 W3 im Handschuhfach suchen musste… Inspiriert von einem bei Printables gefundenen Cover für diese Fernbedienung habe ich…
a Simple Wall Mount for Tenda Nova MW3
Schrittmotor Kurbel mit Zahnrad D6-SW3-H8-Mod1-Z15 und Schrittmotor Kurbel mit Zahnrad D5-SW3-H8-Mod1-Z15
TURN ON: Print Tiny walls! I did my best, but it was really time consuming to make it totally solid in the inside... so some walls are tiny depending on the scale you make it in. so check your preview fist in you slicer, Before printing!…
My 34" Alienware Monitor was to thick to handle the stock mounting solution for the Mi Monitor Lamp. I tried some solutions here on printables.com and thingiverse but none really worked and kept the angle of the lamp like its supposed to…
Intro Update 01/09/2024: Tested new 5º degree tilt, removes almost all reflections that comes thru rear windscreen. Update 31/08/2024: When testing I see some reflections due screen angle, need to test a new version with corrected screen…
Since the monitor housing on the back is so thick, the clamp of the light bar won't fit. This adapter raises the height of the lamp so the weighted part of the clamp can sit on the back of the housing. The file can also easily be modified…
Panel mount for SW3518 / SW3516 Type-C PD board panel generally found on Aliexpress / eBay, with a cutout template to cut your panel. I used this in my Powerbank / Solar generator build. You can install the module in any order: before or…
This is a cover for the GUITION JC2432W328C development board. It is a cheap development board that can be programmed with MicroPython, Arduino IDE and ESP-IDF. 3mm screws are required for assembly.
Work in Progress: This is a backplate mounted cooling solution for EVGA 3090FTW3, it can be used with heatsinks to enhance the cooling ability of the stock backplate, which has heatpipes. I realized the o11 mini's airflow was not doing…
Needed a tool to remove the vent grill without disassemble the whole dashboard. Puller it's not needed as long you pull from the grill with the method from your convenience. Printing Instructions 0.1mm layer height recomended Use PETG,…
I was inspired by https://www.thingiverse.com/thing:4931271 But sadly that thing did not work for my AW3418DW monitor. So after a dozen of trial & error, I finally made something working great for me. Hopefully it works for you too.
this new 2022 series will have the option of a bolt on top rail. (yes, I have gotten those requests over the years) but the real reason I made it's that this shroud will soon also have a lower rail option. that is made possible by using…
what does the MKIISD update mean? the main update and why these are called MKIISD are that I took some improvements from the FGC9 SD and placed in the MKII shroud models that I designed. but keep in mind the are still made to just work…
A compact and practical tool designed to safely connect and disconnect Shimano Di2 EW-SD300 wires without damaging the connectors. Compatible with 12-speed Shimano Di2 road and gravel groupsets, including: Shimano Ultegra Di2 Shimano…
Pictured supporting a 08G-P5-3767-KR in a Fractal Design Define R4 case. I don't know about fitment for any other card/case combination. This brace supports things at the PCB at the corner rather than by the fan shroud like some do. It…
Print 4 pieces fron ABS or PETG and use long enough zip tie.
keep in mind that this need a large printer
A V4N4G0N Keyboard case with a handle to throw it away if you lose in the game. It's compatible with V4N R3 PCB and Monorail.
I needed a simple way to mount my W3230 Panel Mountable Temperature Controller for a project I was working on for my wife. She wanted a way to keep her sourdough starter at the perfect temperature (because happy starter = amazing bread!).…
Wall mount for DeWalt DW3742C Jigsaw blades
My PTZ Optics Webcam has a little too big of a tab in the front, and it covers part of the screen on my new AW3225QF due to the small bezels. I designed this model to follow the 1700R curve and raise the webcam just enough as to not cover…
Case for 2 Way SW3518 with XT60 no support needed 4 M2 bolts required Category: DIY
Original: based on v2 (1-Feb-2025) https://www.printables.com/model/835513-screw-holder-sw3516-sw3518 charger board case
Summary: I use the W3230 thermostat to control my "enclosure heater". The probe is mounted in the center of the enclosure and the W3230 thermostat is connected to an external 24VDC power supply. You can find the thermostat on Amazon, Temu…
Matek Optical Flow & Lidar Sensor 3901-L0X Housing (for FPV/INAV Drones) This is a custom housing designed for the Matek Optical Flow & Lidar Sensor 3901-L0X / PMW3901 module, created to mount securely under The Scout FPV drone (or any…
This mount uses the cable hole in the back of the monitor as a mount point to manage the weight of the Tobii Eye Tracker. It also leaves a whole for the control stick, and the USB ports. Print long side flat on the bed separately, glue…
This is a model of a small DC motor. Dimensions: 115mm x 39mm x 36mm, Shaft is 8mm diameter, ca 15mm long Typical voltage: 12V or 24V, ca 30 W I've added a a 15 teeth gear, modul 1.5 that works well with FischerTechnik. The gear fits…
TURN ON: Print Tiny walls! I did my best, but it was really time consuming to make it totally solid in the inside... so some walls are tiny depending on the scale you make it in. so check your preview fist in you slicer, Before printing!…
a box to mount the W3230 you need: 4x m3 heat insert 4x m3x40 screw Pay attention to the size of the recess as the W3230 is available in different dimensions
FGC9 Mini 1/6 scale TURN ON: Print Tiny walls! I did my best, but it was really time consuming to make it totally solid in the inside... so some walls are tiny depending on the scale you make it in. so check your preview fist in you…
I have adapted this .22 Silencer/Moderator by "elseb" to a push fit that fits perfectly on a Weirauch HW35 air rifle, however it should fit any 15mm barrel. If there is any interest i can make a version that can be tightened with a bolt…
I have updated it to a V2 model this will add 2 bolt holes so the rail is stronger -- what does the MKIISD update mean? the main update and why these are called MKIISD are that I took some improvements from the FGC9 SD and placed in the…
TURN ON: Print Tiny walls! I did my best, but it was really time consuming to make it totally solid in the inside... so some walls are tiny depending on the scale you make it in. so check your preview fist in you slicer, Before printing!…
Use this and a headband to attach your DW3AA to ya head! Fits 25mm headbands. The head of the light and button are on your left while wearing. [Edit] I have added mirrored files so you can choose which side the head/button is on. There…
If you do have a Xiaomi light bar (https://www.mi.com/global/mi-computer-monitor-light-bar/overview), you may think how the hell does I mount the light bar on an Alienware curved screen. Well - the print is a simple design to solve the…
Quick model I threw together in order to swap a spot optic into my new DW3AA.
Hold on tight to your FW3A! This is a tactical ring for the famous FW3A (and similar lights using the same tailcap). It is based on my Noctigon KR4 Tactical Ring design , but recreated with FreeCAD and adapted for the FW3A. Comes with…
Introduction Provides a cable box at the bottom of a Sonoff TH/POW 16/20A smart relay to safely enclose cable connections when used outside of a distribution box, such as wall mounting it independently. Without the cable box, mains…
Recommend smaller resolution for smoother height stepping. Print in any colour to add your own accent piece. Tested on FTW3 only, because of the size difference it will not work with XC3 variants. Should work with RTX 3070 FTW3 as well.…
For users who got the BenQ EW3280U monitor, and, a Chinese Wisecoco 14 Inch 3840x1100 4K monitor, this Fixer is the must-have, definitely. This monitor leg with VESA mount can mount the Chinese Wisecoco 14 Inch 3840x1100 4K monitor (only…
I'm constantly misplacing these 2 tools, so I made a holder with magnets to stick on onto my metal pegboard. I also glued one next to my keyboard in the service area. I have spots for two 3x8mm round magnets. I melted in a chain pin into…
Made this for my Toyota MR2 (Toyota MRS / Toyota MR2 Spyder) because I don't want to use the typical cigarrette adapters because comes too hot and sometimes doesn't make good connection. With this you can use an excelent buck converter…
Storage for 3 flashlights in a 1x2 size
Bracket for AW3821DW, shown on my Fifine AM8, but should work for other microphones.
Printed with clear petg infil set to 30% for the ‘lock’ at the bottom, then to 0% for the rest of the dome Supports only for the bottom section to hold the overhang on top of the ‘lock’ in place, and for the centre of the dome. You'll…
Update: tried in keyboard and did not work since it was too far away from the trackball. New version (v5) should address this issue. but you need to print a remixed version of the adapter_v4_bottom as well! It is still not perfect, but I…
An updated version of my previous design. Easier printing , better finish of the front side, less support needed and stronger too. The previous version had some issues with deformation over time. I have this version for 2 years and with…
this is the shroud set is based on the FGC-9 MKII shroud models. but these are modded to accept paintball barrels. in this collection is a set of different shrouds. in STL and STEP format, so you can customise the look of your marker. to…
Verze 2 - drobná úprava oproti tvaru, který je vidět na obrázku z tisku. Lépe sedí na monitoru. PLA/PETG 4 perimetry, 25% infill
this is the shroud set is based on the FGC-9 MKII shroud models. but these are modded to accept paintball barrels. in this collection is a set of different shrouds. in STL and STEP format, so you can customise the look of your marker. to…
