13 models
The stock sphere for the mount is badly made with a flat part (see pic.) that make the grip by the RAM arm worse, causing the device to move around despite the screw being really tight. So redesined the sphere, with now better clearance…
Print approx. €0.31–€0.38 excl. taxPreliminary estimate for PETGSource material: PET
UPDATE 04-17-2024: I realized that the ram style mount on the back of the device is also used as a heat sink for the CPU inside the unit, so I modified the mount to include openings to allow for air flow around the aluminum mount plate.…
remove the RAM mount ball by unscrewing the centre screw close the hole by screwing the screw back in or replacing it with a suitable M4 screw remove the 4 screws at the corners of the metal plate press 4 pieces of M3 nuts into the…
Update: Version 2 added that fits tighter and has better clips to grip the screen better. I printed my copy using ASA filiment on a Bambu Lab P1S. ASA needs 100c printing plate/bed for this area and preferably an enclosed printer to…
The sun shield for these devices is very shallow, and in direct sunlight from above tends to make it difficult to see the display even at full brightness. Although this design is far from perfect I was able to use Tinkercad to design it.…
A navigation mount for a Garmin Zumo 395 was installed on my Ducati Multistrada when I bought it. I wanted to upgrade to the CarPlay solution from Carpuride with W702 and needed an adapter for the 7 inch display. The adapter is designed…
Best printed in ASA or ABS. Fits perfectly for the CRF1000L. Also needed: x4 M5 Nylock Nuts (DIN985) x4 M5x16 Screws (DIN912) x1 M4x12 Screw with shallow head (DIN7984) 03-Jun-2025: Updated model with a slightly smaller hole for the…
This is a remix design for my BMW R1200RT 12mm bar. Printed with eSun ABS+ You will need : 4 screw M3 x 25mm 2 screw M4 x 40mm 1 screw M4 X 30mm 2 locknuts M4
A wall mount for the Sagemcom DIW7022 set-top box, known as the current (2024) set-top box of a Dutch internet/tv provider knowing: KPN. Holes for the screws are 3mm in diameter, with a 4mm diameter drop to hide to top of the screws. The…
You need an (OPTIONAL M8 and) M5 Thread drill. You need also (OPTIONAL a M8 30mm screw ,) 4x M5 20mm screws and a 300mm M12 Screw. The M8 Screw is for a better durability.
8x šrouby a matky M5 - 30 mm s nízkoprofilovou hlavou (matky upevněny teplotavným lepidlem) 1x šroub M4 30 mm hrazda 11 mm obalena slabě gumovou páskou proti prokluzu
Summary: I purchased some iSelector (SM-PM702) smart plugs to try to flash Tasmota firmware on. I tried to come up with a least intrusive way but in the end you still will need to get to GPIO 1 located in a hard to reach place in the…
Voici mon travail pour installer mon écran Carpuride W702plus sur ma CFMoto 800MTES. Il y a les plans Solidworks et le gcode PrusaSlicer pour du PA12 Sunlu, buse HF0.6mm
