25 models
This is a transition of my bed warping tests from Thingiverse. I was having warping issues and wanted to see how changing my bed temperature impacted printing so I made some basic models that have a similar shape to the models that were…
A simple test to check the bed adhesion and shrinkage of your filaments. I designed the model so that it should definitely lift from the bed. I wanted to test how much different materials shrink and how the enclosure affects them at…
When I first met warping problem when printing large object, I was completely disappointed. Then I found few clips to fix metal plate on platform, but was not completely satisfied with comfort of their use and result. I decided to try the…
Used for troubleshooting possible heatbreak fan (not the hotend fan!) issues. Printed using AzureFilm ASA, satin sheet, enclusure. Adding inner brim may help, but the point is to verify the ability of the printer to produce the part using…
Simple test piece to see how much warping can be reduced with a corner pad
Lily pads or Mouse Ears are circular features that are added in model perimeter locations that may be susceptible to warping, such as sharp angles or highly detailed surfaces. Lily pads are an excellent choice for models that do not need…
If you measured every corner and center and discovered warps? With this print you can test which part you have warp and use thin objects to make it perfect. I saw several test for this case but I made my own quickly on Fusion 360. After…
The worst nightmare of ABS printing is warping. These disks almost reduce completely warping. Instructions Add a disk at each corner of the 3D object you want to print at the bed level. Most of the time, a 1 cm disks does the job. More…
Simple and effective warping/bed adhesion test.
I wanted to make belrius's deck box, but I don't have a heated platform so some of the flat plate-like parts wouldn't work for me. Thus, I made triangular holes in the parts, and they printed with minimal warp. I also included a spring to…
A very simple model for holding pincers, to me was an alternative to printing something useless to test warping Category: 3D Printing Tests
A 48cm/19" raddle/warping bar with 12 pegs. With a warp retainer bar that can be clamped on - we used a bulldog clip.
Simple mouse ears that can be added to your model to prevent warping, after the print they can be easily pulled off.
This is a test that tests if your prints are warping off of the build plate. I designed it with multiple layers so that it can really test if your printer is warping.
https://www.etsy.com/listing/1347082246/weaving-paper-roll-blocks?click_key=80f4ff8be9b1bc7cc99745ade86dc8b91accf353%3A1347082246&click_sum=4e4f1061&ref=shop_home_active_1&sts=1 I sell these here.
In the photos, you can see a print made with ASA filament at a bed temperature of 100 °C and 110 °C.
Another in my series for makers to earn achievements for their dedication to 3D printing. Model prints with 10% infill. Optional panels are included if you want to print brown/wood covers for the model base. Supports are recommended. My…
Every time someone figures out whether a filament sticks to a plate, that answer stays in their head, and the next person burns time and filament rediscovering it. You end up getting people in discord or reddit or forums having their own…
I added slightly more rounded corners using Fusion 360 at 90 degrees to prevent warping.
I printed the body in ABS and had slight warping at the corners. As a result, the inner bodies could no longer fit. I had to adjust the height of the cover a little so that the corners could fit. I used this filament:…
Tie-down to build plate for petg parts, prone to warping, parts that are printed on PLA support, for example.
A quick and dirty in-Orca remix of a solid design based on: Using cheap cereal holders e.g., MCIRCO Airtight Food Storage Containers (4L /135.2oz), which may have slightly warped walls that rub on cardboard spools. Change = Added a Box…
3d prints made from resin on SLA prints tend to warp while they are not cured or currently cured. This is very annoying. This tool avoids this. Attach it to the bottom brim of your resin print and let it then cure either in sunlight or in…
Join the printsbyjayy discord server: https://discord.gg/X9VbhrDzzM This is a project that was originally posted on thingiverse that is now being cross posted to printables. This warping board is designed to prepare a warp at about a foot…
Created using my sister project: "Nextruder Plotters"
