Counting matching models…
important: the diameter is 220mm! your printer must support this size! if you scale it, the candles will not fit! printed with an ankermake m5 in normal mode with 10% infill, no support. ankermake pla+ fillament. for 20mm candles. you can…
The model can be cut using a slicer tool, I recommend adding pins during cutting for easier connection. I recommend using PETG material
Motifs of Christmas wreaths: Set of five dies for printing on fabric or paper. Can also be used as coasters. You may print it in one colour or in two colours.
For my nieces 7th birthday, I designed some extra decorations to fit the Brick Frame by LoryP. She loved it! Print Instructions PLA, 0,4 nozzle 0,2mm layer 15% infill Macaron needs supports and 2 color changes (top-bottom/cream filling)…
This clip connects onto the back of the Lego Wreath Branch when using it in a 45 degree angle (6 branches) configuration.
I wanted some Dungeons and Dragons-themed studs for @MagnumDanger's giant LEGO holiday wreath, so I put together these owlbears. They are kind of ridiculous but they made me laugh. Printed this with supports. Thank you @MZ4250 for the…
I was looking for Halloween stud ideas for @MagnumDanger's giant LEGO holiday wreath and found this amazing gothic bat, perfect for a Halloween wreath, or any other spooky & haunted occasion. I printed this with supports and finished it…
This is designed to be used with MagnumDanger's Lego wreath. Based off a piece I had in my Lego bin, I reduced the height a bit to make it more wreathy. No supports are needed in the hole section. But you will definitely need to support…
This small stud for the large lego wreath has added small detail with a snowflake.
Info: The holes for the candles are 22mm and 250mm print hight is needed. Print Settings: 0.2mm or finer Layer hight (especially for the no. 3) PLA 3 walls/perimters 15% Gyroid Support Auto-Tree (but the outside of no. 4 looks not so nice…
My main recommendation is to use a seam painter for the outside of the jig, otherwise it left a raised area inside each arc.
print both it has 3 coasters ams compatible may need to resize holder
I've scaled this wreath branch up to 200% and added a simple hook mount. I wasn't able to find any others that suited the 200% scale size of the original wreath of Magnum Danger. No need to scale this any more, print it and enjoy! No…
EN: The door wreath, which we had attached with decorative ribbon, kept coming loose because the adhesive tapes were slowly coming off due to the pull. As I didn't want to damage the door by stapling it, I came up with this device. It…
I mashed this up for the fellow Lego Wreath lovers out there, now you have another festive day to use the wreath for! I used a stud from MagnumDanger's Lego Wreath Design and found a rose model uploaded by print___time which i edited to…
I was looking for a fun way to recognize the “winners” at our annual maker festival and hit upon this idea after the Great Benchy Kerfuffle of 2025. To fit on a head, it needs to be printed on the XL if you want it all in one piece. We…
Merry Christmas, Happy Holidays! This project is inspired by my favorite interlocking blocks. I like the creative designs other people have shared, but I wanted to make my own version and custom features. I modeled everything from…
Wreath making is a great activity for family and friends alike. There are countless variations on the materials and colors, however, the shape has remained mostly unchanged. Whether it is made from cardboard, wire, foam or sticks, the…
Lego compatible wreath ornament. Print with 2 walls, .2 layer height. If lego doesn't fit on the wreath try adjusting "X-Y Contour Compensation" setting. Adjusting it by scaling will cause the stud to stud distance to be off.
A hanging loop to use with a ribbon or rope to place your Lego Wreath by @Fuganater (see model below) The wreath is printed @ 200% so I designed the loop for that. You are able to scale it down, however the greatly decreases the size of…
🎄 Christmas Gnome Wreath – Whimsical Holiday Charm for Your Wall! 🎅 Bring a burst of holiday cheer to your home with this delightful Christmas Gnome Wreath – a beautifully detailed 3D-printable model designed to spread joy and warmth all…
Needed a replacement for one that was missing. Print with supports. Use 0.2 or finer layers for better features. Printed on Creality K1C
Mount for Lego wreath that uses 10x10mm cylindrical magnets to stick to either a metal door or clamp to a single pane storm door window. Add super glue to the holes and install the magnets. Then apply more super glue to the front face and…
After trying a couple of the printable wreath branches with hangers they ended up deforming a bit when used with a commercial off the shelf wreath hangers. In the past, the cold made the triangular printed branch hangers brittle and it…
Why decorate your Lego wreath with just one or two things for St. Patrick's Day, when you can use all of the lucky charms?! I designed these for the numerous versions of the giant lego wreath that are out there. My peg diameter is 30mm…
Valentine Day Heart -Colorstacked Only 37 color changes. Supports are necessary but it prints very easy. 2 walls 8% infill.
This is a picture frame for a 5x7inch or 10x15 cm photo. It comes with a stand or keyholes for hanging on the wall. It is in brick form to accommodate Giant Lego Wreath accessories, like my other 3d models. It it fully customizable so you…
Elegant and easy to print door wreath, only 4 color changes, no AMS or MMU needed, 3mf file already colored in bambu studio
Elegant and easy to print door wreath, only 4 color changes, AMS is not required, 3mf file already colored in bambu studio
Elegant and easy to print door wreath, only 3 color changes, AMS is not required, 3mf file already colored in bambu studio
I've skipped on the purge tower... for reasons. DON'T. I ended up with tiny black strands in my white.
The model can be cut using a slicer tool, I recommend adding pins during cutting for easier connection. I recommend using PETG material
Greek god Apollo with lyre and laurel wreath.
Add a charming touch to your spring decor with this elegant “Happy Easter” floral heart wreath 🌸 This beautifully detailed 3D model features a delicate flower frame shaped like a heart, surrounding a bold and clean “Happy Easter” text.…
Design Concepts This Easter wreath design embraces the spirit of spring and renewal, featuring delicate floral patterns combined with playful silhouettes of rabbits and hanging eggs. The design is intricate yet elegant, perfect for…
This is a bundle of Easter decorations for the brick frame and/or lego wreath. It includes a whole egg, a chocolate egg in two parts, a sun, clouds, flowers and a chicken. The chicken needs sanding,due to its size the points are very…
For my nieces 7th birthday, I designed some extra decorations to fit the Brick Frame by LoryP. She loved it! Print Instructions PLA, 0,4 nozzle 0,2mm layer 15% infill Macaron needs supports and 2 color changes (top-bottom/cream filling)…
If you're making a lot of these Lego wreaths you may find this jig handy.
I designed this magnetic wreath holder specifically so it wouldn't touch or go over the framing of the door. It allows the magnets to sit flat against the glass and grab the metal door above it without interference from the trim. Hardware…
important: the diameter is 220mm! your printer must support this size! if you scale it, the candles will not fit! printed with an ankermake m5 in normal mode with 10% infill, no support. ankermake pla+ fillament. for 20mm candles. you can…
We bought some Christmas candles at IKEA, and I wanted to use our new printer to create a reimagined holder for advent time. Each of the four pieces that composes the crown has lines in different directions. You can either print all four…
Print Instructions: Print each piece individually then assemble and glue together. Hang on a door or wall for Valentine's Day decor. Suggested Print Settings: Perimeters (walls): At least 3 with 0.4 nozzle Layer Height: 0.2 Top/Bottom…
BACKSTORY I was at home on a Sunday night, and I thought of my friends and how they were so kind to me over the past school year, so I decided to make something special for them. After 12 hours of prints and 20 minutes of assembly, I was…
This clip connects onto the back of the Lego Wreath Branch when using it in a 45 degree angle (6 branches) configuration.
Please enjoy my Lego Orange Slice compatible with the Lego Wreath by MagnumDanger.
Old models https://www.printables.com/model/708263-giant-lego-wreath-autumn-leaf
A candy corn version of the wreath from our favorite brick company for spooky season! This is not a multicolor print, but designed to print in pieces by color. The corn bits should be oriented to print with the flat surface on the build…
This is a spider web attachment for https://www.printables.com/model/218071-lego-wreath, to go with https://www.thingiverse.com/thing:6746100 (or my remix: https://www.printables.com/model/1016841-spider-for-lego-wreath ). Print it…
A spider attachment for the Lego Wreath by MagnumDanger . This is a remix of https://www.thingiverse.com/thing:6746100, which had slicing issue for me around the eyes. It also simplifies the base to remove the need for some support.…
Model has different layer heights for the different colors shown so it can be printed using color swaps on a single hot end printer. Models shown were painted in the slicer and printed using MMU/AMS. Prints in place without supports.…
Designed this structure for a 24" diameter by 8" tall wreath bag that was too flimsy and did not protect the wreath stored. I printed pieces out of PETG but most materials should be fine. Hoop segments can be printed three at a time on…
Lego spider scaled properly to fit Magnum Danger's Lego Wreath . It's spooky time.
Motifs of Easter wreaths: Set of six dies for printing on fabric or paper. Can also be used as coasters. You may print it in one colour or in two colours.
I wanted some autumn studs for @MagnumDanger's giant LEGO holiday wreath, and an acorn seemed perfect. I'm going to paint the acorn cap with acrylic paint. I printed this with supports so that the top side can be ironed, but they probably…
I wanted some Thanksgiving studs for @MagnumDanger's giant LEGO holiday wreath, and pie seemed perfect. I'm going to paint the filling with acrylic paint; it could be pumpkin, chocolate, lemon, key lime or any other custard or…
This a a simple stud to attach on the Lego wreath by MagnumDanger with bats for a halloween-themed spooky style. Requires no support. If you want the bats to stand out, you can add a color change in your slicer (or manually pause the…
I wanted some Halloween studs for @MagnumDanger's giant LEGO holiday wreath, and a skull seemed perfect. I printed this with supports. Thank you @Thebrakshow_1143028 and artec3D for the original skull. Wreath can be found here:…
I wanted some Halloween studs for @MagnumDanger's giant LEGO holiday wreath, and spiderwebs seemed fitting. I printed this with supports and transparent PLA, and coloured in the stud background so that the web would standout. Thank you…
Upscaled model of the Lego bat for use with wreaths. Two versions, one including a pin the back to orient the bat for a hanging wreath.
I wanted some additional studs for @MagnumDanger's giant LEGO holiday wreath, suitable for Remembrance Day, along with some poppy flowers. I printed this with supports. Thank you @THop3D for the original laurel leaf. Wreath can be found…
A hollow or “open stud” Lego plate scaled for the giant Lego wreath. Use this to add some variety to your studs of for connecting additional decorations.
Based on the Lego clip piece, this clip can fit into my open stud for connecting accessories like my Lego bat/dragon wings and bone to your wreath. The included collet piece allows the clip to fit directly into the wreath branch without…
Modelled after a lego, this clip can fit into my open stud for connecting accessories like my Lego bat/dragon wings and bone to your wreath. The included collet piece allows the clip to fit directly into the wreath branch without an open…
Another creepy creature to join my spider and bat on my halloween wreath. I tweaked the design a bit from the Lego original to make it printable without support.
Lego dragon wings adapted for your spooky halloween wreath. These are one sided for easier printing, so make sure you print one of each. They clip on using clips ( option 1 , option 2 ). Also check out my Lego bat and spider to fully prep…
I wanted to add an additional item to my Giant LEGO Wreath in time for Halloween so I designed a bat to fit on the studs. The fit is tight and depending on your printer you may need to scale it up slightly. Original Giant LEGO Wreath:…
Lego bone minifig accessory adapted for your spooky halloween wreath. You can clip this onto your wreath on using clips ( option 1 , option 2 ).
I tweaked the "interface" diameters as they did not connect very well.
I wanted some Thanksgiving studs for @MagnumDanger's giant LEGO holiday wreath, so here's a turkey that can be painted for maximum fancy decor. Printed this with supports. Thank you @Inhibit_38095 for the original turkey model. Wreath can…
Flat-topped round tile to add more visual variety to your seasonal Lego wreath.
Add some creepy eyes to your halloween wreath. Multifilment model included, but if you (like me) are living a single filament life just set your slicer to pause after the top layer of the tile fills in and switch out to a secondary color…
I wanted some red poppy studs for @MagnumDanger's giant LEGO holiday wreath, suitable for Remembrance Day, Poppy Day or Anzac Day. I printed this with supports and red PLA, and painted the black centre with acrylic paint. Thank you…
I wanted some winter-themed studs for @MagnumDanger's giant LEGO holiday wreath, so here's a sprig of mistletoe! Printed this with supports and used a bit of white acrylic paint on the berries. Thank you @DianaSinkova_2052459 for the…
I was looking for Halloween stud ideas for @MagnumDanger's giant LEGO holiday wreath and found this little guy. I totally loved his old-fashioned ghost look and appreciated his origin story as a ceramic statue. He's perfect as a ghost or…
I wanted some Christmas-themed studs for @MagnumDanger's giant LEGO holiday wreath, so here's a wrapped gift, suitable for Christmas, birthdays or any other gift-giving celebrations. Printed this with supports and used a bit of white &…
I wanted some Dungeons and Dragons-themed studs for @MagnumDanger's giant LEGO holiday wreath, so here are some crits and fails. Printed this with supports and used acrylic paint on the numbers. Thank you @Rizato_1951394 for the original…
I wanted some Dungeons and Dragons-themed studs for @MagnumDanger's giant LEGO holiday wreath, so I put together this mimic stud. Printed this with supports and finished with acrylic paint. Thank you @MZ4250 for the original mimic door…
I wanted some Dungeons and Dragons-themed studs for @MagnumDanger's giant LEGO holiday wreath, so I put together these owlbears. They are kind of ridiculous but they made me laugh. Printed this with supports. Thank you @MZ4250 for the…
I wanted some Dungeons and Dragons-themed studs for @MagnumDanger's giant LEGO holiday wreath, so here is a Beholder (or Death Tyrant, if you're nasty). Printed this with supports (many of them!!) and finished off with acrylic paints.…
MagnumDanger's lego wreath includes a stud model, but the overhang wasn't printing nicely, so I redesigned it to have a 45° overhang - should be easier for any printer. Also slightly increased the hole radius to 15.1mm (up from 15mm) for…
This is a menorah-shaped attachment for MagnumDanger's lego wreath . No support needed. I used a 0.6mm nozzle and 0.3mm layer height. Any material should be fine.
I wanted some Dungeons and Dragons-themed studs for @MagnumDanger's giant LEGO holiday wreath, so I put together these logo studs. Printed with supports and finished with acrylic paint. Thank you @nerdyviews for the original D&D coasters.…
I wanted some Dungeons and Dragons-themed studs for @MagnumDanger's giant LEGO holiday wreath, so I put together this gelatinous cube stud. Printed this with supports and translucent PLA+. Thank you SWAMPSTUDIOS for the original…
I was looking for Halloween stud ideas for @MagnumDanger's giant LEGO holiday wreath and liked this jack-o-lantern, perfect for a Halloween or Samhain wreath, or any other spooky & haunted occasion. I printed this with supports. Thank you…
I was looking for Halloween stud ideas for @MagnumDanger's giant LEGO holiday wreath and I loved the vintage look of this “skeledevil”. It's perfect for a Halloween wreath, or any other spooky & haunted occasion. I printed this with…
I was looking for Halloween stud ideas for @MagnumDanger's giant LEGO holiday wreath and chose these spooky cats, perfect for a Halloween wreath, or any other spooky & haunted occasion. No supports needed, super simple. Thank you…
I was looking for Halloween stud ideas for @MagnumDanger's giant LEGO holiday wreath and found this cute witch's hat, perfect for a Halloween or Samhain wreath, or any other spooky & haunted occasion. I printed this with supports. Thank…
In the case of the inscription wreath, be careful to use the mirror image option if you want to use it as a matrix.
Compatible with Lego Wreath builds: https://www.printables.com/model/218071-lego-wreath https://www.thingiverse.com/thing:6418361 Note: I'm not seeing the Spring/Easter version here on printables anymore, so I've added the thingiverse…
Minor modifications to lego-like accessories for giant lego wreaths Adjusted internals and transition angles for ease of printing/additional depth for assembly, added “LORGO” text to top of stud Based on these items:…
Compatible with Lego Wreath builds: https://www.printables.com/model/218071-lego-wreath https://www.thingiverse.com/thing:6418361 Note: I'm not seeing the Spring/Easter version here on printables anymore, so I've added the thingiverse…
Compatible with Lego Wreath builds: https://www.printables.com/model/218071-lego-wreath https://www.thingiverse.com/thing:6418361 Note: I'm not seeing the Spring/Easter version here on printables anymore, so I've added the thingiverse…
I was looking for Halloween stud ideas for @MagnumDanger's giant LEGO holiday wreath and found this amazing gothic bat, perfect for a Halloween wreath, or any other spooky & haunted occasion. I printed this with supports and finished it…
Just a fun bit of traditional folk art from Sweden for @MagnumDanger's giant LEGO holiday wreath. I printed this with supports and finished it with a little acrylic paint. Thank you wattsforlunch for the original dalahäst model. Wreath…
I wanted some candle studs for @MagnumDanger's giant LEGO holiday wreath, suitable for Christmas, Chanukah, Diwali, Advent or any other candle-worthy celebration. They hold standard round LED tea lights – hopefully this goes without…
