16 models
I designed the model to be strong but at the same time save filament. I chose draft quality for faster printing. It is a suitable option for this type of purpose. Print, remix and enjoy ;)
Support is necessary, even if the pot and feet are printed separately. However, both parts must be glued together. A model has also been added where everything is in one piece, support is required here, too.
Caja para las cartas 56x87 de Descent + Nerekhall, caben perfectamente enfundadas En los huecos (de mas pequeño a mas grande) las he ordenado así: 1] Cartas de ayuda de jugador 2] Cartas de evento de viaje del juego base 3] Cartas de…
Material Frame parts ABS, ASA, or PETG Armor parts Any Layer height First layer 0.2 mm Other layers 0.15 mm Number of perimeters 2 Infill 20%, rectilinear First layer speed 25% of default Elephant foot compensation 0.15 mm Supports Only…
This clip fits the Standard Horizon HX870 Marine Radio and should fit radios with a similar clip mechanism.
My dog “attacked” me while we were out for a walk and ripped open one of my pockets. Luckily i had some TPU filament which is the exact color of my winterjacket so i made this quick tpu patch to sew on that area :D I've printed this…
This covers wall switches ~87x87mm, with a depth of ~13mm to prevent touching the switch. This type of switch seems to be a common size in the UAE. These switch blinds prevent kids and smarthome unaware guests from powering off smart…
Dust/Beauty cover for the bottom row header pins/plugs on the Gigabyte X870E AORUS Elite motherboard
Print the parts as shown. The body is printed at a 45 degree angle. The gcode and the picture use a 10mm support enforcer, but a brim is sometimes all you need. I used ABS as the holster sees a lot of UV. Print the other parts as shown.…
Size 87x87x50mm Space between the facade fixation axis holes : 60.5mm
You will need some longer stand-offs. If I were going to rework this, I'd add built-in stand-offs but I was in a rush to get this made. A PoE shield with fan does fit in this and will power the X876 with no problems.
The “ASUS ProArt X870E-CREATOR WIFI” motherboard has a really tall heatsink for its primary M.2 slot that blocks my AIO cooler from fitting. I wanted to replace it with a Sabrent Heatsink (SB-HTSP), but that doesn't fit the motherboard's…
Esse é um cover da parte da placa mãe x870 Aorus Stealth que não tem cobertura
This is a bracket that fits on the nvme slot 1 of the taichi lite x870e motherboard. It allows for a fan to direct airflow on and around the nvme heatsink. I saw an improvement of around 4-6c across the board. mind you i have a water…
I had Claude fable 5 make this for me real quick after I bumped these buttons for a second time. I am excited to never accidentally push those stupid buttons ever again.
Support is necessary, even if the pot and feet are printed separately. However, both parts must be glued together. A model has also been added where everything is in one piece, support is required here, too.
