Search results: xas

Sort order

Counting matching models…

P
Printablesarcanelayers

Hobbywing SC8 ESC Mount for Traxxas

This is a super simple adapter plate that mimics the one that comes with the Hobbywing EZRUN WP SC8 ESC. The original plate allows the ESC to be mounted into a Traxxas car like a Slash, Rustler, etc. This plate serves exactly the same…

Downloads
144
Likes
9
Rating
5
P
Printablesjrsone

RC10 gold pan wheels for Traxxas Anaconda tires

These custom 5-spoke wheels allow the use of modern Traxxas Anaconda 2.2" tires, front and rear , on the original RC10 gold pan RC car. The front wheels accept the stock bearings/bushings, and the rear wheels fit onto the normal rear hub…

Downloads
125
Likes
12
Rating
0
P
Printableszeusmm
Downloads
92
Likes
10
Rating
0
P
PrintablesSilverBullet126

Hobbywing Max10 SCT Mount for Traxxas Stampede 4x4

A mounting solution for the Hobbywing Max10 SCT in a Traxxas Stampede 4x4 with the stock chassis. This design has 3 parts; a base plate, a step (to keep things level) and then a holder that keeps the ESC and switch in place. 2 x M3 6mm…

Downloads
73
Likes
4
Rating
5
P
PrintablesUpDown

Traxxas Slash 46mm ESC Mount

Flat removeable mount for aftermarket ESCs. Uses the VXL 3s mounting holes. Any setting will work… LITERALLY ANY (I think).

Downloads
19
Likes
0
Rating
0

Traxxas TRX4 Chain Drive, Track Drive, All-Terrain Traxx

I have developed a chain drive for Traxxas TRX4 RC cars, which can be almost completely 3D printed. All you need are a few ball bearings and M3 screws. The drive train is fully functional and has already been tested extensively (in snow…

Downloads
1,507
Likes
591
Rating
5
P
PrintablesJoza

Defender 1/18 Recovery boards for Traxxas TRX-4M (TRX4M)

1/18 scale version of the original 1/10 by MrStolarsky. Pins were re-aligned and the whole board was made stackable. I test printed mine in resin and they came out awesome. I designed hangers for the Traxxas TRX-4M Defender, to hang a…

Downloads
1,472
Likes
135
Rating
4.5
P
PrintablesAnson Liu

Texas, USA (TX) Topographic Map with Rivers

Texas, USA (TX) Topographic Relief Map with Rivers and Coastal Waters Texas, USA mountains, coastlines, streams, and lakes in a dual or single color topographic and hydrographic map! All topographic states in the USA of Plastic collection…

Downloads
1,096
Likes
123
Rating
5
P
PrintablesCobalt3D

University of Texas Longhorns Logo

Magnet of the University of Texas Longhorns Logo. It is designed to fit 6mm x 3mm magnets. Base layer should be white. G-CODE has two layer pauses: 3.8mm: add magnets 4.4mm: color change to orange

Downloads
974
Likes
57
Rating
5
P
PrintablesJoza

Bumper shackle for Traxxas TRX-4M (TRX4M)

A simple shackle for my Traxxas TRX-4M Defender bumpers. Printed in resin and painted. Paper clip can be used to be pressed in to fasten it to the bumpers. Drop of glue might be needed at the ends to secure the paper clip in (I did not…

Downloads
971
Likes
95
Rating
5
P
PrintablesJoza

Defender 1 inch RC wheels for Traxxas TRX-4M (TRX4M)

Wheels for the Traxxass TRX-4M Defender. All fit the original rubber and have the same offset as stock by default. Alternate versions with +X push the wheel out by Xmm, the wheel sits further out. -X brings the wheel closer to the body by…

Downloads
885
Likes
92
Rating
4.8
P
Printablesbonzai000

1-100 Leopard C1 with MEXAS

Five Canadian Leopard C1 tanks were uparmoured with MEXAS appliqué armour kits. These tanks were deployed with KFOR to Kosovo. They were there for two tours and saw almost constant use - the first in 1999 with Lord Strathcona's Horse…

Downloads
863
Likes
94
Rating
4

ZYLtech Texas/Huge spool holder. 5KG Spool! (4x 608 bearings)

This spool holder will hold up to a 168mm wide spool. It uses 4 608 skateboard bearings with a low tolerance/loose fit on the actual rollers but it fits tight with a small bit of force required to slot them in. if you have strength issues…

Downloads
797
Likes
66
Rating
4.67
P
PrintablesJoza

Defender Light guards for Traxxas TRX-4M (TRX4M)

Front light guard for my Traxxas TRX-4M Defender. I printed mine in resin and glued them on. Print some spares as the thin tubes might get broken in print (0.5mm in diameter). I printed 4 at a time and one guard had one bar broken.…

Downloads
778
Likes
84
Rating
0
P
PrintablesLCruz3D

Airless Tyre for Traxxas E-Revo VXL (Dual Extrusion)

Designed these to use with my Traxxas E-Revo VXL 1/16. Its a dual extrusion print. I used PLA (green) and Flex (black). These tires drift more than the other tires we can buy for the RC cars. I tried several tires with different flexible…

Downloads
719
Likes
79
Rating
5
P
PrintablesCarson Raymond

Traxxas TRX4m snow plow

Remixed from a scx24 snowplow. Replaces front bumper. Body does not clip in unless someone wants to remix it. Requires 2 m2x6 screws and a paperclip.

Downloads
714
Likes
125
Rating
5
P
PrintablesOstella3D

Texas Instruments Calculator Front Covers (TI-84 Plus, TI-84 Plus C, TI-90 Titanium, and similar)

I needed a replacement cover for a TI-89 Titanium edition that I was selling on Facebook marketplace, so that the buyer would be satisfied. Luckily, I had another TI-84 calculator that still had its original cover so I could recreate one…

Downloads
710
Likes
41
Rating
4.7
P
PrintablesFroballer12

Stand for Traxxas Trx4M

This is a stand for the Traxxas Trx4m crawlers. It sits on the front and rear links of the vehicle. All parts are posted in the orientation of how they should be printed. Roughly 1hr 45min to print dependant on settings. 4 pieces then…

Downloads
632
Likes
102
Rating
4.71
P

12mm Hex Wheel Hubs for Traxxas

12mm Hex Wheel Hubs for 5mm axles. Work on 2WD and 4WD vehicles. 12mm hex in various widths from 4mm to 12mm. Perfect for adjusting fit when using alternative tires and bodies. Category: R/C Vehicles

Downloads
630
Likes
48
Rating
5
P
PrintablesJoza

Traxxas TRX-4M Drive hex +1.8mm (TRX4M)

7mm long drive hex for the Traxxas TRX-4M Defender. I did not like how the axle thread is vissible with the stock hex drives (just asking to be damaged). This one is just long enough to have the nut flush with the end of the thread while…

Downloads
629
Likes
57
Rating
3
P
PrintablesTheAim4074

Full functional RC Boat made of Traxxas Blast elements

Hi, I just finished the rework of some kind of sump boat which I designed for my son. It just started with a simple idea of having our Traxxas Blast boat modified a little bit but it ended with 26 parts for the boat itself, 9 parts for a…

Downloads
603
Likes
157
Rating
0
P
PrintablesJacyk
Downloads
603
Likes
76
Rating
5
P
PrintablesRaja

Traxxas Xmaxx Impulse Pro-Loc MX43 Rings

I posted these before on thingyverse, but I dont like that site, just too slow, so as I am moving to this, thought I would share the design here too.

Downloads
572
Likes
38
Rating
5
P
Printablesstedipietro

Texas Hold'em Poker Chips

Simple design for Poker Chips (coins, tokens or fiches) with value on it. Print in two colors for better result. No support required. Infill 100% If you are looking for the Texas Hold'em Poker Chips with Bitcoin Logo:…

Downloads
531
Likes
63
Rating
5
P
PrintablesCauces

Texas keychain

Print in PETG and feel free to resize if needed. I included a .stp file as well.

Downloads
528
Likes
40
Rating
0
P
Printableslance greene

traxxas slash battery cover

a big beefy battery mount that has stood up to a lot of abuse. Print instructions Unassociated tags: r/c Category: R/C Vehicles

Downloads
528
Likes
63
Rating
4.5
P
Printablesscochrane17

R/C 1/18 Trailer - Compatible with Traaxas TRX-4M

Not my files. Reuploaded for my collection. Thingiverse thing:5763262 by Rop09

Downloads
525
Likes
99
Rating
4.67
P
PrintablesAjax_Larie

Traxxas Slash 2wd HCG chassis mud guards

I designed these mud guards for a Traxxas Slash 2wd High center of gravity chassis to keep the dirt out of the chassis. It uses the holes from the nerf bars so you will need 4 screws that are a bit longer to replace the ones from the nerf…

Downloads
502
Likes
82
Rating
5
P
Printables7woodman7

RC Display Stand for Traxxas TRX4

I designed this stand for placement in my display case. Support is needed. Printed with PETG.

Downloads
498
Likes
47
Rating
5

Traxxas Rustler 4x2 and 4X4 Paddle Tire and Rim

I just want to say that these really do fling dirt / rocks / gravel behind them in a HUGE arc. These tires are not good if you are around anyone who does not want to get peppered with rocks and dirt. These can easily fling rocks 30 feet…

Downloads
495
Likes
92
Rating
5
P
PrintablesIatraliptes

Traxxas Maxx RC Car Wall Mount

Why? I needed space under the stairs :-) Features: Stable wall mount to grab the rear or frontal inferior wishbones Rc cars suspension locks the car in place and garantees a firm hold to the wall Width is designed for a WideMaxx Kit or…

Downloads
489
Likes
66
Rating
5

Traxxas 3.00 x 1.925 Rims for Rustler 2x4 and 4x4 Trucks

EDIT 2 Here are the 0.85" wide rims and tire for the front of your 2WD if you want that dune buggy look. EDIT 1 I added rim design 011 through 014. I also slightly modified rim 008 by adding an 0.030" fillet on the top edges. ORIGINAL My…

Downloads
472
Likes
68
Rating
5
P
PrintablesMisha.in

Photo frame Hexxas 15

CZ verze 13 × 18 cm , verze 15 × 21 cm Tato velikost fotorámečku je určena pro fotografie o velikosti 10 × 15 cm. Podle orientace připevnění rámečku na stěnu, budou všechny fotografie orientovány buďto vertikálně, nebo horizontálně (ne…

Downloads
462
Likes
136
Rating
0
P
Printablesscochrane17

Traaxas TRX4M Trailer Hitch

Not my file. Reuploaded for my collection Thingiverse thing:5738746 by alane0709

Downloads
460
Likes
54
Rating
4.5
P
Printablesscochrane17

Traaxas TRX-4M Defender Sand Ladder + Mounting Clips

Not my file. Reuploaded for my collection Thingiverse thing:5752468 by Superknutselsmurf

Downloads
456
Likes
51
Rating
5
P
PrintablesTobashadow

Traxxas 2wd Wheelie Bar

This is a fully printable wheelie bar that fits RPM and Stock bumper mounts for Traxxas 1/10 scale 2wd Cars and Trucks including the Bandit, Rustler, Stampede and the Slash. I have printed it in PETG at 0.15 and 0.20 layer height at 6…

Downloads
447
Likes
58
Rating
5
P
Printableslance greene

traxxas slash a-arm

EDIT: updated with newer design This is the a-arm for the 1/10 scale 4x4 traxxas slash. it has the normal mounting holes in the front for the shock, but it also has mounting holes in the rear so you can mount another shock to the rear of…

Downloads
437
Likes
56
Rating
0

Traxxas Rustler Paddle Sleeve 004 - Final Iteration

This is the fourth and final iteration of paddle tires for my and my sons' Traxxas Rustler 2x4 and 4x4 trucks. These paddle sleeves (as I call them) are compatible with the rims here which cam be printed in PLA, and are very durable. Here…

Downloads
426
Likes
98
Rating
4.75

Traxxas Maxx paddle tire, Schneereifen

Schneereifen, Sandreifen, Schaufelreifen für Traxxas Maxx und andere RC-Autos. Macht im Schnee sehr viel Spaß. Absolute Empfehlung! Sehr leicht konstruiert um Material und Druckzeit zu sparen. Trotzdem ist der Schneereifen sehr stabile…

Downloads
418
Likes
45
Rating
5
P
PrintablesSaltyScott

Slash Wall Hanger for Traxxas

Just a simple set of hooks to hang the tires of my traxxas slash off the wall and save some space.

Downloads
410
Likes
65
Rating
5
P
PrintablesMike L

Traxxas X-Maxx protection kit for TMS body

A kit I created for my friends rc car. It should protect the car's body on a rollover - the way he drives, there are many rollovers believe me. :D Important is, this kit will not fit on the original X-Maxx body, it's designed to fit on…

Downloads
406
Likes
36
Rating
5
P
PrintablesPureDeath

Traxxas TRX-4 Esc External switch

Allows you to turn the esc on and off with the body on, uses the esc mounting holes, and a spare 3mm screw. More info to come. Update 8/21/17: Thickened the rocker in places, noticed the key could slide past the rocker and into the body,…

Downloads
399
Likes
70
Rating
4
P
Printablesscochrane17

Traaxas TRX-4M Defender Full Interior

Not my files. Reuploaded for my collection Thingiverse thing:5787531 by alfringant

Downloads
399
Likes
64
Rating
0
P
PrintablesMisha.in

Photo frame Hexxas 18 (remix)

CZ verze 10 × 15 cm , verze 15 × 21 cm Tato velikost fotorámečku je určena pro fotografie o velikosti 13 × 18 cm. Podle orientace připevnění rámečku na stěnu, budou všechny fotografie orientovány buďto vertikálně, nebo horizontálně (ne…

Downloads
399
Likes
146
Rating
5
P

Traxxas Battery Hold Down Plate

Traxxas 2WD battery hold down straps for Rustler, Bandit and 2WD Stampede. These easy to misplace parts are easily printed. For fun, I added an inscribed TRAXXAS logo on both sides. I've used both PETG and ABS. For best strength, print…

Downloads
389
Likes
15
Rating
5
P
PrintablesErik Stolt

Spoiler for Traxxas E-Revo 1/16

I had to raise the body to fit a heatsink with a fan, and the original spoiler touched the body so it would not fit properly, so i made my own design. I printed it with a 0.3 mm nozzle at 0.1mm layer height and support. Iprinted it…

Downloads
385
Likes
57
Rating
0
P
PrintablesMisha.in

Photo frame Hexxas 21 (remix)

CZ verze 10 × 15 cm , verze 13 × 18 cm Tato velikost fotorámečku je určena pro fotografie o velikosti 21 × 15 cm. Podle orientace připevnění rámečku na stěnu, budou všechny fotografie orientovány buďto vertikálně, nebo horizontálně (ne…

Downloads
384
Likes
138
Rating
0
P
Printablesnick.cnc

Nick.CNC Mid Motor Conversion for Traxxas Bandit, Rustler, and Slash

The Nick.CNC mid motor conversion allows you to convert your Traxxas 2wd vehicle to a modern mid motor layout for better handling. All the files needed to print and CNC cut your parts are included. Don't have a CNC? You can send the step…

Downloads
381
Likes
56
Rating
5
P
PrintablesP1lotz

the exasperating maze box of valentine

Hi everyone. I'm P1lotz and I am a Danish student, and I really like to make 3d models. This time I have made a valentine's box, for those who hate valentines day or just like a bit of fun. The box is not a normal box. It is a maze and…

Downloads
372
Likes
169
Rating
4.56
P
PrintablesRem

Texas Star Nerf Target (WIP)

This Nerf Target is inspired by the Texas Star style targets this moving target will help practice hitting moving targets and tracking shots. You can make it extra fun by changing colors of the arms and filament swaps for the target…

Downloads
370
Likes
95
Rating
5
P
PrintablesDarkstar77

Traxxas Shock Spring Preload Spacer

This is an 8mm tall spring preload spacer, designed for any traxxas vehicle with shocks that use preload spacers on the springs. These snap over the shock cylinder, to increase the preload. Very simple to scale to various thicknesses.…

Downloads
356
Likes
28
Rating
5
P
PrintablesLoranga

Link rod end ball joint - Traxxas

Measurements taken from my Traxxas Eagle stadium truck Printed in add:north Adura X (nylon + carbon fiber). Probably works in other materials as well!

Downloads
356
Likes
40
Rating
5
P
PrintablesAwesomeBlahBlah

traxxas Slash GoPro Mount

Front GoPro mount for the Traxxas slash

Downloads
343
Likes
54
Rating
0
P
PrintablesIatraliptes

Traxxas E-Revo 2.0 / VXL RC Car Wall Mount

Why? I needed space under the stairs :-) Features: Stable wall mount to grab the rear inferior wishbones Rc cars suspension locks the car in place and garantees a firm hold to the wall Requirements: I printed the mount with a 0,6 nozzle,…

Downloads
330
Likes
53
Rating
5
P
PrintablesDR 3D

Spoiler Compatible with Traxxas Rustler

This spoiler gives your Traxxas Rustler 2wd a unique and custom look. Be sure to print at 100% infill so it won't break. Use the original hardware to attach. enjoy! If you like this model, please give it a like! And don't forget to…

Downloads
329
Likes
54
Rating
5
P

Traxxas TRX4 Defender Fender Vent

Customise your own fender vent via slicer with different infill patterns. In my case i used superslicer. Settings: 1 bottom layer, 0 top layers, 31% monotonic infill and 4 Vertical Shells. Quality on Top surfaces disabled. Material:…

Downloads
325
Likes
47
Rating
0
P
PrintablesJoza

Traxxas TRX-4M 1/18 IKEA Skadis hanger (TRX4M)

Over-beefy hangers for my Traxxas TRX-4M Defender. Might work for other crawlers/rc cars. Designed for a 56mm tall tyre. Distance between inner tyre walls to be 75mm (or 75 ±40, peg holes are 40mm apart). Right wheel hanger (uploaded)…

Downloads
325
Likes
65
Rating
5
P
PrintablesTeamK

Traxxas TRX4 Shocks - Mini-T Spring Perches

If you want to use Losi Mini-T springs on your Traxxas TRX4 shocks, these spring perches will allow you to make the conversion. The lower perch is designed to allow popping it off over the shock shaft without removing the rod end, so…

Downloads
323
Likes
29
Rating
0
P
Printablesscochrane17

Traaxas TRX-4M Chassis Upgrade

Not my files. Reuploaded for my collection. Thingiverse thing:5723777 by Kubiczech81

Downloads
318
Likes
54
Rating
4
P
PrintablesJipisavage

Texas Cookie Cutter

The size is 3 inches(size of a cupcake)

Downloads
316
Likes
33
Rating
0
P
PrintablesSupershape

Traxxas Rustler A frame Arm Part #3655

Part# 3655 Print 100% infill. PETG or ABS. TPU is a great option too. a Near perfect duplicate of the original. A few areas are made thicker.

Downloads
315
Likes
33
Rating
0
P
PrintablesHanselcj

Traxxas Lower Spring Retainer

A component of the parts kit 3768. It is a cone shaped lower spring retainer for my 4x4 Rustler vxl. I got my ruslter and took it out for a spin. It collected every kid in the neighborhood! An hour later after they had all had a bash, I…

Downloads
309
Likes
48
Rating
5
P
PrintablesRubber Duck

Finger Turn For Traxxas or SCX24 Remote

I have a Traxxas TRX4m, I drove it so much that I got tired of using two hands. So I went into Fusion 360 and fixed my problem. I would recommend TPU but PLA or something like that will work. I recommend printing the nob at 100% infill…

Downloads
304
Likes
47
Rating
4.5
P
PrintablesDR 3D

Steering Blocks For Traxxas Rustler

This is a steering block I remixed from Sidpatchy's model . I made the piece that attaches to the steering assembly a little bit thicker to make it more durable. Link to the original Traxxas product here Compatibility: Traxxas Bandit…

Downloads
304
Likes
48
Rating
0
P
Printablesscochrane17

Traaxas TRX-4M Defender Decorative Vents

Not my file. Reuploaded for my collection Thingiverse thing:5752440 by Superknutselsmurf

Downloads
302
Likes
38
Rating
5
P
PrintablesCobalt3D

Texas A&M University Magnet

Magnet of the Texas A&M University Logo. This model has holes for 6mm x 3mm magnets. Base layer should be White. G-CODE has two layer pauses: 3.8mm: add magnets 4.6mm: color change to Maroon

Downloads
294
Likes
35
Rating
5
P
PrintablesgForce

Traxxas 1/16 E-Revo Front Upper A-Arms

Mirrored original to get right side. Print at angle with supports. These hold up very well.

Downloads
291
Likes
42
Rating
5
P
PrintablesModel Magic

Walker-Texas Ranger - 1993

⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…

Downloads
288
Likes
41
Rating
0
P
Printablesscochrane17

Traxxas TRX4M ( TRX-4M ) +1.5mm +/-0.1 HEX Wheel spacers

Not my file. Reuploaded for my collection Thingiverse thing:5733107 by GreiniStyle

Downloads
285
Likes
23
Rating
0
P
Printablesmemory_null

Traxxas Slash 4x4 Stand

RC Stand for Traxxas Slash 4x4. Included are both HCG & LCG Chassis Stands. HCG may still need some tweaking. LCG is complete and the bay has room for the Traxxas EZ Peak+ ID Charger. I had previously uploaded this with logos but had to…

Downloads
284
Likes
45
Rating
5
P
PrintablesNiSE

RMR Cover Plate - Texas Flag (for Agency Arms Irons Forward G19 RDS Mount))

WARNING: THIS IS NOT A STANDARD RMR COVER PLATE! It has been specifically designed to fit an Agency Arms Glock RMR Iron Forward RDS Mount from their AOS line. Pictured is a Gen4 Glock 19. Some context: RMR covers on Thingiverse didn't fit…

Downloads
279
Likes
25
Rating
5
P
PrintablesTritschi

1-100 Tank Leopard C1 with MEXAS (print-optimized)

Tried to print this model. 100% size is far too small. I choose 150% - slicer parameter. As I drowned in supports I made another approch: I took the bottom part of the tank and cut it in two halves. Each half could be printed flat on the…

Downloads
275
Likes
26
Rating
4.5
P

USS Texas BB-35 1/6000

This is a 1/6000 scale model of the USS Texas BB-35. The USS Texas is a famous battleship from WWI. it fought in both WWI and WWII. at the current time of making this, the Texas is 107 years old. This model is intended as a unit for a…

Downloads
272
Likes
34
Rating
0
P
PrintablesBash Creates

Traction Board for Traxxas TRX4

Add these decorative traction boards to your Traxxas TRX4 rig for some instant credibility. Look great printed in orange, but could be really cool in red too.

Downloads
256
Likes
37
Rating
5
P
Printablesbtacks

Traxxas TQ Battery Door Replacement

This is a replacement cover door for the standard traxxas TQ transmitter remote. Remixed from torula to have a flat bottom and sized correctly for my remote. The original was too long and too thick. Width was pretty spot on. It's in the…

Downloads
256
Likes
12
Rating
5
P
PrintablesJMoto84

Traxxas Keychain/Key Tag

A 3-colour Traxxas keychain

Downloads
256
Likes
44
Rating
5
P
PrintablesMichał George

Traxxas TQi wall mount

Hi I made very simple wall mount for the traxxas transmitter. Enjoy!

Downloads
251
Likes
54
Rating
5
P
PrintablesAlex Se

Spare Tire Delete Plate for TRAXXAS TRX4 2021 Bronco

Spare Tire Delete Plate for TRAXXAS TRX4 2021 Bronco

Downloads
250
Likes
27
Rating
0
P
PrintablesNiko.hogh

Traxxas Slash 4x4 LCG XL battery hold down

This is an extended battery mounting bracket, for the Traxxas Slash 4x4 LCG chassis. I designed it to work with my Turnigy Rapid 5500 mah 4S LiPo battery (as you can see in the pictures) Be aware that for this to fit the aforementioned…

Downloads
250
Likes
25
Rating
0
P
PrintablesEK

HexaStack Balance Game

HexaStack is a modern balance and dexterity game built around hexagon geometry. Players take turns adding modular elements with hexagonal openings onto a vertical structure. With every new piece, the balance becomes more challenging as…

Downloads
249
Likes
111
Rating
5
P
Printableskbedrich

Custom Front Wing and Rear Wing for Traxxas 2WD Vehicles (Rustler, Bandit, Slash, Stampede) (Ver. 2.1)

Custom Front Wing and Rear Wing for Traxxas 2WD ONLY vehicles Provides adjustable downforce for speedruns! This is a pair of front and rear wings that have been designed to give adjustable amounts of downforce while producing very little…

Downloads
248
Likes
39
Rating
0
P
Printablesmathewloki

TRAXXAS REVO 3.3 Conversion kit

conversion kit for the revo 3.3 & revo 2.5 found out it also works on the slayer pro.3.3 you will have to arrange the parts on your printer for best printing but al;l parts are printed with 100% infill hardware needed are standard revo…

Downloads
240
Likes
19
Rating
0
P
Printablesbonzai000

1-100 Canadian Leopard C2A1 MEXAS

The ultimate Leopard 1, the C2A1 mexas was deployed to Afghanistan in 2006. Based on the Leopard 1a5, the C2 bolted on a bunch of composite armour panels and went to war. Category: Vehicles

Downloads
238
Likes
24
Rating
0
P
Printablescar fan

ski Traxxas

Skis pour camion rc 2wd

Downloads
238
Likes
35
Rating
5
P
PrintablesModel Magic

The Texas Chainsaw Massacre - Leatherface - 1974

⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…

Downloads
233
Likes
35
Rating
0
P
PrintablesAaron Ferguson

Slash/Rustler/Stampede Rear Uprights for Traxxas

Traxxas rear uprights. Stock look with a little more strength added in with rounds. I haven't printed this yet, just measured and drew it up. So it may need a few fixes in the future. Print Settings Printer: Voxelab Aquila X2 Rafts: Yes…

Downloads
233
Likes
43
Rating
0
P
PrintablesArt Brannen

Traxxas Xmaxx / XRT Motor fans mount

My cousin got an XRT, and while it is the same frame/motor/etc it has a lower body than the X-Maxx so you need to V mount the fans it fits a 56mm motor and 40mm fans

Downloads
233
Likes
16
Rating
0
P
Printableskelico

traxxas nerf bar

needed a new nerf bar for my Slash RC car and drew one up with some additional strength and it seemed to work great.. now I just have a few on hand when we go driving

Downloads
232
Likes
36
Rating
5
P
PrintablesSilverBullet126

Hobbywing Max10 SCT Mount for Traxxas Rally/Slash LCG

Mount for the Hobbywing Max10 SCT within a Traxxas Rally/Slash with a LCG chassis. There's a cutout for the temp sensor as well as it's pretty close. You'll need one M3x8mm and M3x12mm for mounting. The ESC and switch should friction…

Downloads
231
Likes
10
Rating
0
P
PrintablesKurodo

Battery holder for vintage Texas Instruments calculators TI58 and TI59

To make the electrical contact between the different battery slots, it's necessary to insert 2 paper clips at height 11.2 mm. This pause is included in the 3mf file. Holes in the body allow to test the electrical voltage path along the 3…

Downloads
230
Likes
9
Rating
0
P
Printablesbuttsisfun

Traxxas Slash 4x4 Drift Wheel

I tried ESylin's drift wheel ( https://www.thingiverse.com/thing:1334558 ) and they worked great, just wanted some that are a closer diameter to the stock tires so I drew these up. This design is for use with 12mm hexes, which the Slash…

Downloads
229
Likes
32
Rating
1
P
Printablesscochrane17

Traaxas TRX-4M Surfboard

Not my file. Reuploaded for my collection. Thingiverse thing:5772182 by mkiiina

Downloads
225
Likes
31
Rating
5
P
Printableslance greene

traxxas slash bumper

EDIT: updated with newer design a rear bumper for the 1/10 scale traxxas slash use with my printable bumper arm http://www.thingiverse.com/thing:1175688 and printable bumper arm brace for extra support…

Downloads
224
Likes
32
Rating
0
P
PrintablesMAKERTEAM®

Traxxas TRX-4M Zurrhaken / Tie Down

Traxxas TRX-4M Zurrhaken / Tie Down https://makerteam.de/blog/projekt-traxxas-trx-4m-defender-umbau-tuning-3d-druck-pro-contra/

Downloads
221
Likes
51
Rating
5
P
PrintablesJulian

Traxxas TRX4m #9795 Utility Trailer Rails

I created rails for the Traxxas Utility Trailer #9795 which fit relatively tight into the Trailer and can be taken off if need be.

Downloads
218
Likes
59
Rating
5
P
Printableskbedrich

Custom Front and Rear Wing for Traxxas 2WD Models (Rustler, Stampede, Bandit, Slash)

These wings are meant for Traxxas 2WD models only. (NOT the rustler 4x4 or slash 4x4) Pls traxxas lawyers do not take this down again, this is a custom NON-TRAXXAS part.. Front wing installation: The front wing comes in two parts: the…

Downloads
216
Likes
32
Rating
0
P
PrintablesStudio 727

Traxxas TRX4 ESS Dual Mount

This is a custom mount for a Traxxas TRX4, designed for the ESS Dual sound module. It places the ESS above the motor for better weigh distribution than the provided stock mount. It fits a stock TRX4 with no modifications necessary. It…

Downloads
216
Likes
28
Rating
5
P
PrintablesMarc --

Traxxas slash rack

I made a rack to hold my slash on a shelf that wasn't deep enough. wheels are off the ground.

Downloads
216
Likes
35
Rating
0
P
Printableslance greene

traxxas slash battery adapter

this is the traxxas slash 1/10 scale battery adapter post. fits fine in the chassis. Print instructions Unassociated tags: r/c Category: R/C Vehicles

Downloads
213
Likes
21
Rating
0
P
PrintablesWildcat

Traxxas Slash Battery Holder V2

A battery holder for the Traxxas Slash. After having issues with the battery slipping out from under the my simplistic battery holder during jumps and flips, I created this one. Its wider profile means it holds the battery much more…

Downloads
213
Likes
11
Rating
0