Traxxas TRX4 Chain Drive, Track Drive, All-Terrain Traxx
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Chain Drive/ Track Drive for the Traxxas TRX4, All you need are some ball bearings and M3 screws. All-Terrain Traxx
- Rating
- 5 / 5
- Likes
- 594
- Downloads
- 1,519
- Makes
- 5
- Views
- 14,867
- Reviews
- 5
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial
I have developed a chain drive for Traxxas TRX4 RC cars, which can be almost completely 3D printed. All you need are a few ball bearings and M3 screws. The drive train is fully functional and has already been tested extensively (in snow and mud).
Print:
The chain must be printed from TPU. The rest can be printed from PLA or PETG.
Ball Bearings:
4 pieces 27x20x4
4 pieces 15x21x4
40 pieces 19x6x6
note: The anti-twist part (Verdrehschutz) is different for each drive wheel. And note that the pieces on the left and right are mirrored (except the chain, spacers and gear.). I have already included this in the download models. The M3 screws can be screwed directly into the parts (do not overtighten them).
I spent around 30 hours designing it and have already tested it for many hours. The design was tested on different TRX models. I hope you have as much fun with it as I did.