Counting matching models…
Its a Remix from AKinferno remix :) you find the original on Thingi ID 5383489. The original cames from WheatlyLaboratories Axolotl and McGybeer's "Articulated Lizard" and the head comes from “Schlossbauer” Axolotl. We painted it in…
If you want to sell my model commercially, please check my patreon website https://patreon.com/sunset3d?utm_medium=social&utm_source=twitter&utm_campaign=creatorshare If you do commercial sales with my design without paying the amount,…
Turn your phone into part of the machine. The Mobile Exo-Suit is a print-in-place mechanical phone stand with an articulated body, interchangeable armor, and support for phones from approximately 70 to 95 mm wide. Choose between a…
This articulated axolotl is a remix changing the head in order to make it more round and less edgy. I additionally fixed a part o the 3D model where a link was slightly fused together. Features Looking cute Easy to print (pre-supported…
6/10/2023 - 2.7 posted. Thanks to SuperRoach for pointing out the floating pieces in PrusaSlicer. With the latest PrusaSlicer RC1, it renders the bottoms of the gills on the left side of the head floating. That wasn't the case previously.…
A base/diorama builder is now available for download for this mini figure model! ___________ IMPORTANT NOTE ON COMMERCIAL USE OF MY MODELS Please note that I am sharing my designs to any one to enjoy but for personal use only . I have NOT…
I have printed the extremely popular articulated lizard many, many times. Its my kids favorite item I have printed for them. https://www.myminifactory.com/object/3d-print-articulated-lizard-98192 My kids also love axolotls so I searched…
Rexo is the ultimate chibi dino pal—big smile, chunky tail, and all the charm of a prehistoric plushie. Whether you're looking for a quick print or a colorful desk mascot, Rexo has a version for every print mood!
Nozzle 0.4 Layer Height 0.2mm (Recommended) No supports needed Scale it as you like :)
This is the baby version of the new flexi axolotl featuring hybrid link system containing classic flexi arms and tail and the new style link body The whole axolotl flexes including his head fins and the tails flexes and pushes together to…
Articulated limbs Multicolor support Added coloring on the nostrils and mouth, giving it a bit of a smile
Cute little articulated axolotl. I painted it with acrylic markers.
Tested print profile for the articulated Skeleton Axolotl 0.20 mm layer height 2 wall loops 15% sparse infill PLA One plate Print-in-place No assembly required It has been successfully printed with and WITHOUT supports - up to printer…
What should I design next? This is a 3D model of an Axolotl Keychain, a salamander known for its unique appearance and regenerative abilities. The model is highly detailed, with fringed gills, a soft-textured body, and endearing facial…
A cute articulated axolotl that prints in one single piece , with smooth flexi movement along the whole body. Designed for reliable printing, clean curves, and an adorable aquatic look. Perfect for collectors, kids, and anyone who loves…
Dive into the enchanting world of our Axolotl figure, a must-have for aquatic enthusiasts and biology aficionados! 🌊🔬🦎 This 3D printable model comes with both an STL featuring a keychain hole and one without, offering flexibility for your…
Cable organizer updated version with locking system that allows for more effective organization Assembly instructions, insert ring into slots.
Flexi model Axolotl in minecraft style. Printable in one piece. The legs, head and tail move.
The super adorable Axolotl just got a cosmetic upgrade! This one is truly gorgeous! :) This is a remix of the high res version of the articulated axolotl. Big shout out to AKinferno for his hard work making this! 3mf provided. Holes for…
You can find my newest lamp designs for commercial use here. Commercial license for MODERN MACHINE. This is a premium model that has been released for free. ====================== PRINT INSTRUCTIONS 6-12% infill 5 top layers 2-3 outer…
Heres a very cute little friend for you I love the Axolotl, they are so special creatures Now you have the possibility to print your own ones Easy print no supports necessary the Joints are extra strong Have fun with this print. Don't…
Say hello to your new aquatic buddy! With its round face, frilly gills, and permanently cheerful smile, this little axolotl is here to brighten your day. Whether it’s chilling on your desk or hanging from your keychain, it’s a fast and…
If you’d like to sell physical prints of my designs or support what I do, feel free to check out my Patreon . With an active subscription, you will get: A commercial license to sell 3D prints A starter pack with 15+ bonus models New bonus…
No Supports … Just Print … How about buy me a coffee buymeacoffee.com/spank7
Easy to make a cute Axolotl keychain I printed in PLA Infill: 15% Layer Height: 0.20mm Supports: No If you like my work consider Buy me a coffee 😊
This is a model I uploaded and strengthened the arms that are too thin at the bottom connection by raising the connecting bar and adding 2mm to the bottoms of the arms making them stronger and last longer. 15% infill Printed on Bambulab…
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed Scale it as you like :)
Finally, I can introduce you to the unique Dragon Axolotl V2🦎 Very flexible and absolutely cute, with or without wings🪽 And as you already know from my other designs, there's a separate eyes version for you. You also receive 3mf colored…
Hilge' the Axolotl Kids Fidget Toy (Bearded Dragon Inspired) By: David Orlo --- The Hilge' Story Hilge' the Axolotl wasn't just any toy; he was special. With his tiny, bendable legs and soft, wiggly body, he brought joy wherever he went.…
Enjoy a fresh and modern take on the classic Tic Tac Toe (XO) game with this fully 3D-printable set. Designed with clean geometry and precise fit, this model prints easily on most 3D printers and produces a durable, sleek game board…
Remix of https://www.thingiverse.com/thing:4878486 by agrestige (https://creativecommons.org/licenses/by/4.0/). Reconfigured to minimize need for supports and strengthen legs. Supports only needed for legs and peg that connects to head.
Hey, I'm back! Today I created this axolotl with a moving head. I tried ARTICULATED for the first time and it WORKED! I'm glad my first creation with a moving part works. Ps: I changed the file to not have so much data. I recommend you to…
Let's see what I've remixed so far: an Axolotl - check ✅, a hybrid of 2 Axolotls - check ✅, a Lovolotl - check ✅, and now I present you with the one and only Rosolotl ready for valentine's day! :) I am providing two versions - a 6mm and…
✨The multicolor 3MF files for both the normal version and the keychain version are now available on my Patreon! 🎨 ⏳ Don’t wait too long—become a Merchant Tier member by March 31, 2025, to get them for $0! 🚀By supporting my👉 Patreon 👈, I…
Just "discolored" remix with added brim on selected areas
NOW UPDATED WITH SIMPLER UNIVERSAL POWER SWITCH DESIGN INTRODUCED IN BENDER2 Bender's bigger, badder brother is here! Meet Flexo, the most flexible Meshtastic powered node "case kit" available… and its FREE to print! Check out the intro…
Upload a make if you print it, i'd love to see a picture Plug together Minecraft axolotl The holes dont need support. Plug on head needs support. hand square might need to be trimmed then popped into feet Carve out the holes a bit if the…
Here it is! A brand new extra long version for you: Dragon Axolotl V2 – 73 cm / ~28.7 inches long 🦎🐲 Longer Dragon = more Fun! It has so many articulated parts, so amazing! Features: 👀 Separated eyes version 🪽 winged version 🎨 colored 3MF…
Remix of an excellent looking axolotl. When I attempted to print the original, the last few segments of the tail released while printing. I had success with this version with a few mouse ear brims on the tips of the fingers, either side…
Smile along with the “Cute Axolotl Keychain” – a cute and simple accessory that features a happy axolotl. It’s a great gift for those who love these unique amphibians, showcasing their friendly and curious personality in a design that’s…
Assembly All you need to do is print the head and the body and put them together no supports or glue needed, although using glue is recommended with a looser fit.
When closing their operative business back in June 2024, Windy City Woodwinds have released their designs to the public and asked for broad distribution, which I am happy to do here on Printables. This is the “Series 56”. I have…
Here is a little companion for you to print, the cute Axolotl Keychain Print in Place, No Supports neccessary. Very easy and fast to print. I also provide this model without Logo and a 3mf Multicolor File exclusively on my Patreon…
This is a set of files to build a 2m and 70cm moxon antenna. Inspired by David (DL1DN), known on youtube as “QRP lifestyle”, but his design was not available for DIYers. So I decided to design it from scratch and pusblish it for others.…
I gave the big eyed Axolotl to my grandmother and asked her if she could improve the level of cuteness. So she knitted a new one for us! lol :) The Big eyed Axolotl now knitted and compatible with 6mm and 8mm glass eyes. :) This took me…
Flexo head and upgrade parts for: https://www.printables.com/model/795837-bender-bending-rodriguez-futurama-modular https://www.thingiverse.com/thing:6470320 Added holes to limb parts, now you can use rubber band to make them little bit…
Meet the Flexi Axolotl! This long, fully articulated model prints in place and has a short print time—perfect for a quick and cute print. Have more ideas or suggestions? Feel free to send me a DM! Note: The rock shown in the photos is…
This is the new field box that is shipped with OF-M4.4 but in a 3D printer friendly version. This version takes advantage of the included magnets to hold the base securely as a lid. The box also includes slots that could be used to secure…
Easy to make a cute Axolotl keychain I printed in PLA Infill: 15% Layer Height: 0.20mm Supports: No If you like my work consider Buy me a coffee 😊
I love the exo suits from edge of tomorrow and have seen lots of sci fi films with exo suits like Elysium, so I made an exo suit for the dummy 13 figure. I used the frame parts from it and changed small designs of the parts to make it…
Cute little Axolotl sculpted using Nomad on the iPad. It's cleaned up and ready to print, though I would recommend painting on (organic) supports for the sides of its head, since they're suspended in the air otherwise.
Hi this is low poly axolotl remixed with axolotl from @PrintBrothers3D. I printed it without any supports and without brim, but you can print it with brim when it dont stick very well to the plate. Its print in place. I hope you like it.
When closing their operative business back in June 2024, Windy City Woodwinds have released their designs to the public and asked for broad distribution, which I am happy to do here on Printables. This is the “Series 64”. I have…
A Axolotl. You can support me on https://www.patreon.com/Schlossbauer if you like my work. Category: Toys & Games
When closing their operative business back in June 2024, Windy City Woodwinds have released their designs to the public and asked for broad distribution, which I am happy to do here on Printables. This is the “Series 72”. I have…
This set of easy to print parts makes a nice and well working router out of your Proxxon multi tool. It should fit for all similar tools that have a 20mm diameter metal clamping base. The height of the router bit tip vs. the base plate…
🚀 Attach, aim, and upgrade your Mobile Exo Suit with this functional rocket launcher add-on! Perfect fit, no glue required. 🎯 Printing Instructions Print in PLA or PETG with 0.2 mm layer height and 3 walls. No supports, glue, or brim…
Wanted a model to try out some dual colour silk filament. The cavity is designed to fit a specific square pot. This allows the plant to be swapped fairly easily. Printed at 0.16mm layer height, 3 walls, and with auto tree supports turned…
Be careful when removing supports on the right arm, it is sort of weak and can break easily.
With its cute and friendly appearance, this delightful creature is designed to print easily and flawlessly, whether you're using a beginner 3D Printer or a fancy pants one! And, thanks to its articulated joints, you can pose your axolotl…
Add a tropical vibe to your plants! This Tiki-inspired planter features deep, sharp wood-carving textures that look incredible with a stone or wood filament finish. 💙 Enjoying the Freebies? I love bringing these concepts to life and…
Works great, 60 mm wide. Print instructions When assembling turn nut M6L counter-clockwise.
Easy to make a cute Axolotl having coffee keychain I printed in PLA Infill: 15% Layer Height: 0.20mm Supports: No If you like my work consider Buy me a coffee 😊
Want to access even more models not found here? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my files in one…
This is a remix of https://www.thingiverse.com/thing:5147572 by ItsVops to fix the tail from breaking. Print needs support.
Mark 2 Inspired Iron man Exoskeleton Arm Enjoy Category: 3D Printing
Overview A small axolotl-shaped planter designed as a simple and fun piece for desks, shelves, or small spaces. It works well with succulents or cactus, but it can also be used as a holder for small items or even as a coaster depending on…
This is a set of 2 printable reeds for use with a Tenor Saxophone. Design credit is shared with my brother T.J., who actually plays the Saxaphone Print instructions Category: Music Summary This is a set of 2 printable reeds for use with a…
Articulated Axolotl With Articulated Arms and Legs
This is a cute little axolotl that is fun to play with. Print it with only supports on the gills. It will print in about 45 mins if you don't scale it. You can print it in Pla, Abs, Tpu, or any other filaments. If you print it in Tpu it…
Revision history: 27/01/24 added the STEP files, which may be particularly useful if you want to adjust the slots for the magnets inside the guiding rails. 01/02/24 added an alternative guiding rail version with cutouts for round magnets…
It features the characteristic wide, friendly face and the iconic three pairs of external feathery gills sprouting from its sides.he torso is divided into four distinct mechanical segments, connected by hidden ball-and-socket joints that…
Adorable, compact, and your loyal companion for any keychain! Features: 🧩 Print-in-place design 🛠 No supports needed 👀 Separated eyes version 🎨 Multicolor version The eyes, wings, and body details are now beautifully colored (4colors…
This is a replica of a real steel suppressor, that could house the Acetech or Xortech Mini Airsoft-Tracerunit. There is a long an short version with a crown or flat end. Keep in mind, the crown version is better to be printed on a resin…
When closing their operative business back in June 2024, Windy City Woodwinds have released their designs to the public and asked for broad distribution, which I am happy to do here on Printables. I recommend using a standard metal…
This is a Homunculus loxodontus remix. https://www.thingiverse.com/thing:2103775 I changed the hands to add detail and a better pose. I also made it water tight without clipping and separate the eyes.. the eyes are super tiny. If you…
Este adorable ajolote en estilo low poly combina simplicidad geométrica con una ternura irresistible. Su diseño está compuesto por formas angulares limpias que conservan la esencia de este icónico anfibio mexicano, conocido por su…
3D printer bed Scraper with hexagonal pattern. Made on Fusion 360 Printed on Ender 3 Supports: Yes Adhesion: No Infill: 20% Material: PLA PLA Brand: Whatever you like Happy Printing!!!!
Remix of multiple models from thingiverse. Worker tokens fit nicely into designated slots. Supports required. I printed these at 0.1 mm.
This is a print in place articulated Minecraft themed Axolotl! Designed with printability and accessibility in mind, to print this model you need: Zero Supports No Multicolor And It Fits On Any Build Plate Size This model prints in one…
Remix for use with Meshtastic Requires SMA crimp connector, a piece of heat shrink tubing, and RG174 cable or similar diameter. Glue the connector with the crimped cable into the antenna using 5-minute epoxy or another glue .
Exotic Monstera Leaf Keychain you can print it with 0,4 mm nozzle. Result is in the photo. Or try smaller nozzle :)
+-+-+-+-+ Check out Version 2.0 !!! Modified, so the turn-pieces won't turn by themselves. https://www.printables.com/de/model/745979-v20-travel-xo-travel-tictactoe ---------------------------------------------------------------- Since my…
You can pun some leds inside or neopixels, you may need some glue to put it together. I used the materials listed here: Lámpara LED de conducción a todo color, módulo redondo y cuadrado, 1/3/4/7/8/12/16/24/25/32/40/64 bits, WS2812 5050…
USB flash drive case in the form of an Axolotl from MineCraft.
My Omnifixo needed a cool field kit too, but I don't own a TS80P, I own a Pinecil. There's room for improvement, but I'm pleased with it. The plate is best slid on from the side so the magnetic clamp bases don't shoot out and stick to it.…
Hello, this is a fully functioning soft robotic gripper. You can use it on its own or print the exoskeleton around it. You can use the exoskeleton to mount it to a robot. It has the dimensions of approx. 200 mm in diameter and 17 mm in…
Intro Three storeys to give your Gecko a choice of environments. First Floor: Nearly completely hidden Second Floor: Protection from above and 3 sides, but a wide outward view Third Floor (Roof): High but unprotected position to observe…
This is a simple axolotl model that should be very easy to 3d print, only requiring a couple of super short bridges. Print Settings Printer: Artillery Sidewinder Rafts: No Supports: Yes Resolution: 200 Infill: 30 Filament: PolyMaker PLA…
This is my first ever 3D model I've created! I used the program Blender and it worked out very well :) I'm really happy with the result and hope someone will actually print my own model :)) Also you can remove the stand afterwards on your…
Exosuit based on the game Subnautica (console/pc)
A weird plant pot held up by tentacle like things. Category: Sculptures
I made the Axolotl bigger and the legs print flat, also ready for Multi Material such as bambu AMS
Description Proxxon combination wrench holder including versions for both Küpper and Skadis Pegboards. In order to save space the wrenches are placed sideways. Each wrench size is displayed to the left of the wrench. Available models…
