Counting matching models…
This model has 0,4mm tolerance. If you need less or more tollerance let me know in comment, i have project with parametric design so can add any tollerance. On pictures you see 70% rescalled print (black cube). For best results I suggest…
Bring one of the world’s most recognizable landmarks to your 3D printer with this Hagia Sophia Mosque (Ayasofya) model. Inspired by the historic beauty of Hagia Sophia in Istanbul, this 3D printable design is made for architecture lovers,…
Yet another Kobayashi Fidget Cube. 09/12 - Update for less support. I refined the model to print with a 0.6 nozzle, the spacing between the parts was adjusted accordingly. Of course with a 0.4 nozzle the part can be printed. Printed with…
🇯🇵 東京へようこそ! ⛩ Welcome to Tokyo! Celebrate Ten Years of MiniWorld3D with an update to one of our first models. Check out other models in this same location, like Kaminarimon and Hozomon. ⚠ - - Please read the Print Instructions further…
Print 1 each as downloaded for the Left side and 1 ea (mirrored) in your slicer for the right sides. (probably in PETG if you're going to use them outdoors) utilizing the provided hardware that comes with the Yaseu FC-50 Tuner. Don't have…
The yashica 44 is an old twin lens reflex camera designed for 127 film. This film is like the widely available 120 film, but with a 4cm wide strip of film instead of 6cm. This makes it challenging to use today, as film is hard to find…
Another version of the famous Koabyashi fidget cube, credits to pkobayashi . This design have some bigger hinges, being easier to print and withstanding more fidgeting. May need some movement until it gets loose.
This is Version 2 of my Flashforge 5m+ Ilyas Enclosure Mod. V1 can be found here: https://www.printables.com/model/954270-flashforge-5m-ilyas-enclosure-mod This ONLY works with the FlashForge 5M DIY Enclosure mod. All credit goes to Ilays…
Yashica 124G Lens cap. I printed it in PLA with 0.4mm nozzle and 0.2mm layer. It fits snug!
Having an issue with exceess small parts laying around, I needed an organizer that would aesthetically fit 15-16 cm small glass shelves in ikea system. I aimed to reduce the material amount and allow for stackability. Print instructions…
Bay 1 lens/sun hood, for all cameras with bay 1 bayonet. This was designed in INCHES. Have to convert to mm for printing (2450%)
NOTICE V2 is coming very soon (changes to risers C & D) This ONLY works with the FlashForge 5M Enclosure mod. All credit goes to Ilays for his superb creative & design work on his original enclosure mod. I have remixed some files from the…
I found this model on https://www.thingiverse.com/thing:1903584 and i tried to make it possible to print, so i used organic supports and autopaint function in new prusaSlicer 2.6. i had to add a lot of my own paintings of supports, and…
UPDATE - I added a second version with the hinges not going all the way through the cubes since this looks a bit nicer, it does print a bit more difficult so I would suggest first print the older version and then the updated version, the…
Yashica Electro 35 Battery Adapter /Yashica MG-1 (etc etc) After a sucess of previous model (first upload on 5th december 2019), I decide to improve the model by reinforced the adpater. If you have an old camera that uses mercury cell…
This adapter lets you install a commonly available PX23 6 volt battery in a Yashica Electro 35 GSN camera. They originally used a 5.6 v mercury battery. It may fit in other cameras as well. Very simple print, no supports needed. I printed…
A chibi style figure of Inuyasha, an anime character. Two versions uploaded. The only difference is one has modeled eye features. Printing Tips Supports are required. Rotate around X-axis in backward for ~30 degree. Other orientations may…
This is a faithful reproduction of the Yas Marina Circuit. Its dimensions are 20cm long, 10cm tall, 3mm thick and the track width is 5mm, but you can scale up or down any dimension to suit your needs. As it is a simple model, it looks…
3D model created from the following heightmap: https://manticorp.github.io/unrealheightmap/#latitude/27.984700118612693/longitude/86.923828125/zoom/10/outputzoom/15/width/16258/height/4033 Imported into blender and mapped to a divided…
This is a body cap to fit the Contax-Yashica CY-Mount. It uses the standard locking pin in the camera to latch in place, so to release you must hold down the lens release button. Knurled edge to help in attaching/detaching from the…
I recreated some classic (JDM-)wheels. They're approximately 1:3 scale and have an diameter of around 13.5cm and a width of around 9cm. They're not a perfect copy as I drew them just after some pictures from the internet. Print them as…
Update 2024/11/07: Added 2row_molle_clip to use with the micropals grip versions to let you horizontal mount them on SCRD style 2row molle belts. Print a mirrored pair per holder. Update 2024/10/28: Added…
After playing with Kobayashi cube on one party I had to model one. You have to assemble this one and it needs supports on build plate only which are easily removable. Connector1 and Connector2 shaft and hole are same dimension. I have…
Just added a simple logo. Works with mano Yashica TLR cameras (Mat 124 / 124G etc) Category: Electronics
The red eyed tree frog is native to the tropical rainforests of Central America, and is pretty popular in the pet trade (only buy from trusted breeders). If you don't want the heartache of a dead pet frog, you can print your own. You can…
Yas Marina Circuit, Abu Dhabi, United Arab Emirates, on a stand with it's name. Race track 3x3 mm Stand 198x3x15 mm Gap for putting the track into the stand 0.1x0.1 mm bigger so it's easier to assemble. Looks best when separate parts…
Same model - set up to 5 colors mmu print make sure your setup is up to the task - this calls for both accuracy of the printer and mmu for 100% print this is a 400 filament swaps print. Print Settings Printer Brand: Prusa Printer: Mk2.5s…
It is recommended to use smoothing for a better finish.
YASH - Y et A nother S pool H older Okay, why another spool holder for 3D printers? There are already a million of them in all possible ways. Yeah I know... but inspired by the big companies which lay down the really big cables, I wanted…
Chibi Inuyasha slashing sword Tessaiga. The model is supposed to stand by itself. Tips Support materials are required. Samples were printed in 30° backward rotation. Might have better orientation but I didn't test. Avoid supporting hard…
I love the Kobayashi Fidget Cube as a clever, 3D-printable fidget. The most amazing thing about it is that no assembly is required. Through the magic of 3D printing, all the joints are printed "in place". I've printed many of these…
YAST Yet another speed tower. Category: 3D Printing Tests
Yes this is another Swiss-Pocket-Knife-Style-Keyholder. I did not find what I exactly wanted, so I designed my own, taking into account the hardware that I had available in my workshop (M3 screws with inbus hex heads and self locking…
OpenSCAD - new Version - see below... I was seraching for a simple handing spool holder for mounting in my Ikea Ivar shelf system. Didn't find one - did my own! If you are familiar with openSCAD it's customizable in height and width of…
Lord Krishna is the Hindu god of love, compassion, and protection . Known as the Dark One, he is often depicted with dark blue skin. Krishna is an avatar of the god Vishnu, but he is also worshiped as a god in his own right. Hindu…
I use PLA, nozzle 0.4, layerhight 0.3. No support needed. But i guess anything goes :) You need one box and make a square 100*100mm opening in the bottom, mount the sliders parrallell to the opening. I used blind rivet to fasten the…
I recently acquired my first vintage TLR camera, a Yashica Mat-124G. Since I haven't yet gotten used to the viewfinder being mirrored, I find it particularly difficult to control the tilt of the camera to capture horizontal or vertical…
Mine came without it so here we are. It's a tight fit based on the specs for a 3/4-16 UNF 1A thread, but with a little force they do thread together. I wanted something that wouldn't move easily with every-day handling but could still be…
Simple to print, you dont need a multi colour AMS or MMU unit . All you need is black and white filament. This will print in any FDM printer capable of printing 0.08 layer height. This filament painting is created with Steve Lavitas'…
UPDATE 6sep2022: Added a small notch below the nozzle to minimize surface tension dragging soapy water in under the dish. ---------- Not much to say about this one other than this is the soap dish I personally always wanted . So naturally…
el modelo se mejoro para que sea apto ara impresión 3d uno de los dos modelos que hay tiene una base unida a la figura, ya que no supe como hacerla de manera desmontable de la figura en blender, pero mas adelante si este modelo alcance…
Keep the filter on and place this lens cap on to protect it. Suitable for TLR Bayonet 1, Aires reflex, Rolleicord, Rolleiflex and others. Filament: PETG Which one to print? From left to right: Lenscap for Rolleiflex with bay 1 filter on,…
YASR is currently a work in progress. I will add more panels over time. Important: Front panels follow the measurements specified in EIA-310/Eurocard. A rack unit (U) has a height of 1 ¾ inches or 44.45 mm and for a 10" rack 254 mm in…
Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 or support me on Printables Clubs! Patrons have…
RADTEL RT-950 ,HIROYASU HI UV-850pro, BAJETON BJ-9000 bicycle holder for handlebars from HF7POL
Needed hardware x2 608 bearings (22mm ext-diameter, 8mm int-diameter, 7mm thick) x6 M3x12 screws x6 M3 threaded inserts x1 M5 threaded insert (optional) x1 (or x2) PC4-M5 quick couplers for 4mm PTFE tube (optional) PTFE tube x1…
Please share your prints Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Swap Instructions: Start with Black red 11 orange 14 white 24
Model je inspirován postavou Yasuo z League of Legends s unikátním pojetím designových prvků, které mu dodávají osobní nádech. Dynamická póza vystihuje podstatu hbité a rychlé povahy postavy.
I bought this camera a few weeks ago and it came with a metal lenscap but I found it was incredibly difficult to use as it required a lot of force to snap onto the photo lens, so I made a copy of it but changed some things to make it fit…
I have this broken Yashica for sometime and now since I have access to 3D printer and Fusion 360 software I was able to successfully achieve this conversion. The focus helicoid is a simple M25 thread and it was inspired by the early leica…
The radio rail will need supports due to the bend in the handle, but the other parts should print fine without as long as you print the files with the recess oriented upwards. To print on the opposite side, mirror the arts in your slicer…
This is a compact, 90-degree cold shoe adapter specifically designed for the Yashica Mat-124G . The side-mounted accessory shoe on these cameras usually leaves external light meters facing sideways. This adapter reorients the shoe by 90…
Wanted a simple, snap-fit spool for filaments from a Paramount3d sample pack. I've included both 15mm and 30mm versions. Any combination of 2 should snap right together so you could actually make a 22.5mm version if desired. If you print…
Indian Motorcycle – Szárnyas Embléma
Following my design for Yashica Electro 35 CC grip I've decided to make this, a simple to print and comfortable grip for legendary Yashica Electro 35. It mounts with a simple ¼" camera screw, often called “tripod screw”. I'm currently…
I have always found focusing with my Yashica Electro35 rather cumbersome and the mechanism to be kind of sluggish. While this may be attributed to my camera needing some CLA, i could not understand why the original focustabs screwed into…
Harness the power of the wind with this breathtaking samurai warrior 3D print STL that captures every flowing detail of ancient mystical power. This incredibly detailed figurine showcases a hooded warrior wielding dual swords with flowing…
Yet another Spoolholder for Filament What you need: 2x M8 Rods 150mm or 200mm 8x M8 Washers 8x M8 Nuts 8x Bearings 608 ZZ Printer: Own Build ndl V2 Rafts: No Supports: No Resolution: 0.2 Infill: 25% Filament: Generic PLA, PETG, ABS doesnt…
A spoolholder for the Snapmaker. It has mainly 3 functions: 1) Holding the filament spool straight above the build plate. No more bends in the filament, no tension. 2) Holding the touchscreen on top. Easy access when standing in front of…
Kobayashi Fidget Cube - with Chinese lucky word FB: https://www.facebook.com/3DPPark/ MV： https://www.youtube.com/watch?v=ZVxvlv4lxxY&index=10&list=PLlHG10g1RIDL-CW-ARqeE9QJzIGxEh85l Custom Section Category: Art
The 2nd edition of Hunted: Kobayashi Tower comes in a neat throwback VHS case, but it leaves much to be desired in terms of component organization. So, I threw together this quick and simple insert to minimally resolve the issue, for…
Gegenlichtblende / Sonnenblende / Störlichtblende / Streulichtblende für das Yashica ML 50mm f2. Gewinde M52 x 0,75. Kann aufrecht stehend mit der großen Öffnung nach unten ohne Unterstützung gedruckt werden. Für den Teil mit dem…
Yet annother Space Invaders Tribute. This one is for handling your Toilett paper. Space Invaders Arcade game came in the year 1978 and blew my mind avay. Wrong size, rezise the STL. Wrong shape download *.f3d and make a remix. No support,…
A modell of Kobayashi Maru from Star Trek 2009.
This is a remix of the flat fat hinge Kobayashi Fidget Cube with customizable text embedded into the object. You can put up to 8 letters on the cube. When customizing, type the letter you want to appear in each spot, and leave any you…
Like the name says - it is just another simple pot! :) Print with 0% infill and 2-3 walls :) Enjoying my designs? Support my work and help me create more models: https://ko-fi.com/sunny3dfab
Adaptador para utilizar baterías 4LR44 en las cámaras Yashica Electro 35. Hace falta algo de maña para “fabricar” el conector inferior. Yo lo hice reutilizando el de un mando viejo de TV (ese que parece un muelle) soldado al cable de…
Remixed insert for the 2nd edition of Hunted: Kobayashi Tower, which comes in a throwback VHS case. Removable dice and token tray makes it just a bit easier to get your game started and keep your table organized. Ammo and timer tokens…
Rampa específica para cobayas y pequeños roedores. Permite conectar un piso superior con el inferior, con una altura entre ambos suelos de 15cm. Incorpora escaleras interiores para mejor agarre del roedor.
This 3D model set includes two cosplay accessories inspired by Momo Ayase from the anime Dandadan : A round medallion pendant designed to be worn on a choker or ribbon. A pair of alien-shaped earrings , replicating Momo’s signature look.…
Yet another spool system. Yes, another spool system. YO! ANOTHER SPOOL SYSTEM. Okay, got that out. This one is unlike most others in that you can chain them to another. So you get the advantages of having a long beam (mainly, stops spools…
What you need: 2x M8 Rods 150mm or 200mm 4x M8 Washers 4x M8 Nuts 4x Bearings 608 ZZ Printer: Own Build ndl V2 Rafts: No Supports: No Resolution: 0.2 Infill: 25% Filament: Generic PLA, PETG, ABS doesnt matter Notes: I printed it in ABS
momo ayase kidnapped by aliens. Powered by MakerWorld-Make My Lithophane (https://makerworld.com/makerlab/makeMyLithophane)
The 4L puzzle was awarded a honorable mention in the 2015 International Puzzle Party for its ingenius design. Designed by Yasuhiro Hashimoto. Intended for personal use only and not for commercial purposes. !!!! Each part can be printed in…
Version 2 – Lens Cap for TLR (Bayonet 1) with Mounted Filter With this design you can keep your filter on and simply place the lens cap over it to protect your TLR lens. Compatible with TLR Bayonet 1 (Aires Reflex, Rolleicord, Rolleiflex…
This adapter serves only for aesthetic purposes. The truth is, I couldn't find a way with sufficient focus for this machine's body. What happens is to have a focus, the lens would have to be closer than the body's own entry point, which…
After designing an extruder assembly mounted filament cutter, I found the PTFE tubing feeding to it would foul on the led light strip on the standard mounting points on the ILYAS mod risers. So I threw these together so that nothing would…
Little mod for a old Yashika cam, so its possible to mount a little flash to the cam. I'm using a cable to connect it to the camera, because the cam does not have a hotshoe. The adapter is mounted on the tripot thread.
💖 Support Me If you like this model and want to use it for commercial purposes, you can support me on Patreon and get a commercial license: https://www.patreon.com/cw/MonsieurPierre A detailed 3D model inspired by Yasuo from League of…
Esta detallada figura en 3D captura a la perfección la elegancia y el estilo de Emilia. El modelo la representa luciendo un deslumbrante diseño de archivo del reconocido diseñador Alexandre Vauthier, complementado a la perfección con…
Yet another quick release fastener. Hold on to cylindrical objects with minimal force. No support needed. I used PETG for flexibility and endurance. My use case is a gate at the top off a staircase. When not in use i want it to be tight…
Width: 130mm Height: 97.50mm Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA Kexcelled Black Transmission Distance: 0.2 PLA PolyLite Stone Blue Transmission Distance: 0.5 PLA BambuLab…
Self-timer Lever for Yashica FR-1 (and probably whole FR and FX series). Mine broke, so I had to squeeze it to advance the mechanism. It ended up breaking in two, so I made a printable model. All other FR type cameras FR II and FX series…
NIGHT BRINGER YASUO MODEL 3D CTRL3 VERSION
You don't see many Yashica Rapides and I think the lens cap would be almost impossible to replace. Here's my “out and about” version. If I loose it, I'll print another. I printed it upright with support in PLA and it came out nicely and…
I was inspired by several filament holder's on Thingiverse. I tried PHIL ( http://www.thingiverse.com/thing:996398 ), but I wanted a complete tray and I wanted the rollers a little farther apart and bigger diameter. So I came across…
This Hindu/Vedic Sannyasin is looking directly at the viewer for full visual effect. He has matted dreadlocks tied up over his head, and traditional "malas" around his neck. Resin printed on Elegoo Mars 5 Ultra with both black and white…
I printed with Organic support. Of course you can download *.f3d file and make your own remix in fusion360.
Here is a model I made for my Yashica camera. The cavity is based on the maximum published diameter of the battery, so one at the lower tolerance may wiggle a bit. Use a spring from a pen to bridge the gap of the contacts. Make sure you…
Just print normal
Ayasofya İstanbul Türkiye Lithophane
![Baby Krishna with Mother Yashoda -[Easy to Print Filament Painting]](https://media.printables.com/media/prints/578692/images/4622578_ec140f3a-a5dd-49b2-910a-5cd998e6dd35/rt-1.jpg)
