Counting matching models…
Update 2025-02-17 Added Breech - Lifter Nut v2.stl , Breech - Lifter Bolt v2.stl , and Breech - Lifter Pin [x2].stl These replace the old Breech lifter parts, should fix issues with the nubs shearing. Insert the pins into the lifter parts…
I absolutely love the Yeethammer. It was the first large 3D printed nerf project I assembled, and it almost single-handedly got me into the hobby. As I've built more things I decided to give this incredible silly shell launching machine…
I found there was a slight bit of wobble using the Collet Nut and O-Ring version, leading to reduced consistency of shots, but wanted more securing and adjustment points for the screw-based version. This lets you secure at top and bottom…
still in testing but just a nerf launcher. assembly: take piece 1 and put a spring in the back and then take piece 2 and put it in the cannon.
paused at layer 11 to change colors. Made this on my Flash Forge AD5mPro. Half speed on layers, travel, and acceleration but that's kind of where i keep my settings so it could be different for you and yours.
Update 2025-02-17 Added Breech - Lifter Nut v2.stl , Breech - Lifter Bolt v2.stl , and Breech - Lifter Pin [x2].stl These replace the old Breech lifter parts, should fix issues with the nubs shearing. Insert the pins into the lifter parts…
My daughter is really into wrestling and this is the logo for Main Event Jey Uso. I couldn't find this online anywhere else, so here ya go! You can use multiple blue filaments for the contrast, but I will be printing just light blue,…
The yeethammer already looks nice, but what if it had an overly fragile blade attached to the end of it? This thing is pretty much only held together by some small pegs and superglue, so no extra hardware required that you didnt already…
Here is but a humble stand I made from the original breech shroud files to create a stand to display the Yeethammer. Pretty simple. Made to have a .2 clearance on each side, Can scale down in you slicer to have a .1 clearance for a bit…
Rotational force should not be a show stopper for yeeting. When i am misusing my poor Yeethammer with a bit too powerful spring, i noticed that a lot of rotational torque occurs between the two rear sections. This torque is enough to…
I wanted to be able to mount and display my yeethammer as it's an amazing model. On my model i have the charging handle on the left so if you have it on the right you may need to mirror the model that the charginf handle doesnt stop the…
With something like the Yeethammer, you really do need to be able to shoot ALL of the available projectiles that Silly Shells offer. I submit, for your approval, the Yeethammer-compatible Demolisher Rocket Silly Shell. This shell remixes…
I've broken my Yeethammer a couple times by accidentally firing when the bolt was open, resulting in it crashing into the front and the breach not having enough time to close. This mostly prevents that, by locking the trigger when the…
The Yeethandle by Reboot is an awesome model and looked to solve an issue I was having with my Yeethammer - the torque from a single side bolt handle would cause the bolt to jam. However my E3v2 wasn't going to print the single piece…
Why place Easter eggs when you can YEET them? This fun catapult launches chocolate eggs with style, making Easter egg hunts more exciting than ever! Just load, flick, and watch the eggs fly! Print Settings: No supports needed, best to…
Stamps for rating memes i didnt have flexible Filament on hand and had to use PLA. After some light sanding PLA works better than expected! If you need anything, feel free to reach out! Questions/Suggestions/Criticism is highly…
100x160mm sign, with good advice for all manner of situations Mesh and Solid (may print easier) models provided. Best with color switch above 1mm, as with included gcode. Pictured in Shadowbox Frames , which fit all of my signs .
I was experiencing some issues getting my yeethammer to catch when priming, it seemed that the plunger rod wouldnt move far enough back. So, I modified the original catch to be slightly thinner where the plunger rod catches so that it…
still in testing but just a nerf launcher. assembly: take piece 1 and put a spring in the back and then take piece 2 and put it in the cannon.
paused at layer 11 to change colors. Made this on my Flash Forge AD5mPro. Half speed on layers, travel, and acceleration but that's kind of where i keep my settings so it could be different for you and yours.
Enclosure for this adapter: https://www.amazon.com/Intel-i226-V-Gigabit-Ethernet-Server/dp/B0DPHMSV15?crid=31JNWWQDEWG9U Modified from original for universal use, remixes or testing purposes.
P1S yeet/poop bin built as my first exercise in 3D print modeling and multi-color/AMS printing. It is similar to other models I have seen online but I created it to (hopefully) improve looks and functionality a bit by including a…
This is the Yeetlance: a shell-ejecting, breech-loading, single-shot, half-length dart blaster. Practical? No. Competitive? No. Fun? Oh absolutely. Update 2024-01-20 p2: Added missing O-Ring for bolt plug seal to BOM. Update 2024-01-20:…
Basic trigger edit so you can loop a small hair tie or rubber band for the trigger. I am using a hair tie I got from target but anything similar to this should work:…
New frame for the Mark II OPRBG by Rorlin, and other respective contributors to the design. Also added a cut out for an orange safety plug which may or may not be legally necessary for your location, or just for those people who plan on…
THIS IS NO LONGER NEEDED. PRINT THE NEW CATCH LIFTER. On my print of the incredible Yeethammer, my trigger could go past the normal position and get locked in the bullpup mechanism if I pulled hard. Conveniently, there was already a hole…
I noticed that when priming the Yeethammer it would get stuck towards the end if I didn't pull with enough force. This was a result of the geometry of the “track” in the “cam-track-fore-l/r” parts requiring more force towards the end of…
These modified silly shells are made to be loaded into the Yeethammer, then twisted (or clipped form the barrel) to prevent ejection when reloading. This lets you reload the Yeethammer much more quickly by only loading darts instead of…
I got a little too excited while using my Yeethammer and kept breaking the Breech Lifter pins. As a result, I modified the breech lifters to be reinforced by an M3 screw or bolt so you can Yeet to your heart's content without fear of…
I found that I was holding the foregrip up high and the corner of the foregrip bracket was jutting into my hand, so I've smoothed that out. In addition, I didn't like how the foregrip bar could move, so I've stuck a hole in so that you…
A laser pointer attachment for picatinny rails. Not designed to be accurate or adjustable, this is purely for fun, and mostly just for attaching to homemade nerf guns. Specifically this is designed for the Yeethammer by Spyr . DO NOT AIM…
This sight is designed to replace the picatinny rail on the Yeethammer with a flip up leaf sight. It uses the same hardware standard as the Yeethammer, so you will hopefully have the right parts. Requires four 6x3mm magnets and one M3…
Took me some time to figure out how to actually properly merge/group the notches from Astropulse's non-ejecting remix to a Sniper-Shell w/collet, so i figured i'd save some of you guys the hassle and upload it as a remix. Print the same…
Unfortunately the guide-bits (don't know the proper name!) sheared off my cam track. I designed this to run a 6mm M3 screw into them to reinforce against those forces. So far so good. I only did one side, you will need to mirror in your…
Blank covers to make your own designs (f3d file included) or remove the existing one.
As it was hard to source the parts needed for the Yeethammer here in EU (Sweden in my case) I had to do some remixing for it to fit an acrylic plunger tube of 36mm inner diameter and 40mm outer diameter from Amazon , cut to 145mm. However…
This part replaces the “cam-track-cover” on the Yeethammer to enable mounting of shell holders. The part is designed for the left side, but can be mirrored (X-axis) in your slicer to fit the right side. You may choose to install 1 or 2…
Hooks for putting your Yeethammer on your IKEA Skadis board. Printing Instructions Print in PETG. PLA will warp more over time under load. Print with at least 3 perimeters/walls and higher infill (gyroid) ~30% or more. Print 2 pieces.…
A spring spacer for the yeethammer, if the spring is too short. You install it by putting it on the plunger rod after putting on the spring. so the spacer rests in the back near the catch
Pretty much a cosmetic piece, considering the yeethammer is a shotgun, but it does serve as iron sights if you have sniper shells.
My daughter is really into wrestling and this is the logo for Main Event Jey Uso. I couldn't find this online anywhere else, so here ya go! You can use multiple blue filaments for the contrast, but I will be printing just light blue,…
When I built my yeethammer my plunger tube would torque down on whichever side it was being pulled from, and as a result the plunger wouldn't always latch. I found myself spreading my hand and grabbing the nut side of the bolt as well and…
