57 models
A vertical and horizontal cover plate for the Ikea/Sonos speaker When using this as a nightstand the horizontal hole is visable, this covers it :) The vertical piece needs a dab of glue or sticky tejp to hold. the horizontal piece is a…
Print approx. €0.27–€0.33 excl. taxPreliminary estimate for one variant
Fully 3D printable, cheap and easy to build RC model for everyday flying. Many scale details such as airframe plating or engine encourages to create realistic paint jobs. You’ll get a superb performing airplane with highly efficient…
Print approx. €0.24–€0.29 excl. taxPreliminary estimate for one variant
This is an adapter to let you use a lamp shade harp on your Ikea Symfonisk. To not stress the PLA, I bent the harp just enough so that's it's just snug in the adapter. The collars on the harp aren't utilized. It required only a little…
This is a simple lampshade for the famous IKEA SYMFONISK lamp. I made two versions for you. First is the “Dome”. Simple, one object, ready to print. Add supports. Second one is an easier shape with shade and a lid. You will need to print…
Wall bracket for symfonisk picture frame
Symfonisk Speaker Modification to Stand-alone Amp This model converts a Symfonisk Speaker into a stand-alone amp that can be used with the Sonos ecosystem. This Amp will output to a woofer and tweeter but could be modified to output to a…
I designed a wallmount for the Ikea Symfonisk speaker. The are tilted by 15 degree
Light and elegant variant of front and top door knobs
Rotating Wallmount for the IKEA Sonos Speaker: SYMFONISK Additional Part needed: corner brace (DE: Winkelverbinder) Dimension: 90x90x65x2,5 2 Screws: M3x8mm with countersunk (DE: Senkkopf) 3 Parts: Symfonisk Groundplate (Extra Perimeter =…
This is an alternative model of engine cylinder for an RC airplane WACO YMF – 5. The original model was created by 3Dlabprint and is available on their website https://3dlabprint.com/shop/wacoymf5/. This model doesn't have as much…
Hello I created this mount for the IKEA Symfonisk speaker to put it under a shelf. you will need 2 brackets, one for each side and 4x M4 12/16 screws to hold the speaker in place. The screws will cut their own thread into the PLA and fit…
Ikea SYMFONISK speaker grill Speaker grill is made in two parts as my printer is not big enough to print the speaker grill in one go, this how ever makes it possible to do two separate designs on the speaker grill, different colors and /…
When spotted Symfonisk Sound Remote I started to have the desire to mount them next to regular light switches and use them like dimmers. Most wall-switches in my house use ABB Tango line. If you use the same it might be for you a straight…
WARNING: if you printed the moon lamp at 100% this adapter will not fit. I scaled the original moon lamp adapter 115% in order to fit the ikea symfonisk lamp. So if you want to use the moon lamp as a shade for you ikea lamp, you have to…
This is a project to convert IKEAs SONOS remote gen. 2 to a LK FUGA wall switch. Note is it only a psychical conversion. The electric components are the same, except the size of the battery and switches. Bestilling af dele Gå til…
Key features complete new design and look for the IKEA Symfonisk speaker direct, undisturbed passage of sound waves into the room clear sound distribution front design can be changed with other printing plates (textured, carbon, silk,…
Yellow Biplane Over the Mountains Category: Vehicles
Key features 20% less material consumption (52g → 42g) faster print much faster slicing lightwight & sturdy design larger holes for better audio transmission 2 variants avaiable (with buttons / no buttons) whole part (for large printers)…
Key features complete new design and look for the IKEA Symfonisk speaker direct, undisturbed passage of sound waves into the room clear sound distribution front design can be changed with other printing plates (textured, carbon, silk,…
Symfonisk bookshelf speaker wall mount at a 5 degree angle. Print on its side and use 2 x 4mm bolts and nuts for securing to the Symfonisk itself with standard mounting holes.
I designed this Skadis holder to use the original Symfonisk mounting kit for attaching the Symfonisk Bookshelf-Speaker to a Skadis Pegboard. https://www.ikea.com/de/de/p/symfonisk-haken-fuer-regal-speaker-schwarz-50444325/ I printed it…
Made as a present for a talented programmer. Now it can be your present to someone or just a desk memorabilia. You can scale it to your liking on your slicer, but the original dimensions are 6x6 inches with a little extrusion on top.
Build your own SONOS Amp (This Tutorial is based on a tutorial from this Link and this Video ) Note: This works for the IKEA SYMFONISK version 1 speakers. I don't know if this works for the current version 2 of the SYMFONISK speaker, as…
Printed at .2mm layer height with a .4mm nozzle using PLA on a Prusa Mini+. Allows hanging of an Amazon purchased LED light bar (see Pictures for listing) that allows the light to be suspended above or below the frame in a backwards…
Extra parts for building the 3DLabPrint's Waco YMF-5 model as a display piece, as featured in the Prusa Academy 3D print postprocessing course. A list of parts with a few notes: The exhausts belong on the bottom side of the engine…
A set of chocks with the correct scale and height, as the wheel pants of the WACO are rather low. Additionally, the font and back chocks are joined which ensures that they will not shift if e.g. the plane is bumped.
I have remixed in one piece for large printers
English below Standvorrichtung für SYMFONISK Tischleuchte WiFi-Speaker, Ober- und Mittelteil können aus PLA oder anderem Material gedruckt werden. Ich habe mich für das GreenTec Pro von Extrudr entschieden. Die Füße sind aus TPU gedruckt,…
It's common that Bang & Olufsen's Beolab 4000 break down. You can get cheap IKEA Symfonisk speakers and put the amplifie
The IKEA SYMFONISK remote is a great multifunctional zigbee remote for Homeassistant / Zigbee2MQTT. You can directly bind buttons to lights (on/off, level) or use buttons in Homeassistant for any other criteria. Replacement Process To…
When mounting and dismounting the motor mount I noticed what a hassle it was to insert the nuts and screws for mounting the motor into the motor mount. I also realized that if I was planning to use the motor in a different model the…
A new top cover for the IKEA SYMFONISK sound controller. I use it to dim lights however (homeassistant + zigbee). Just remove the 3 screws and carefully take the controler apart. It might be possible to just pull the original cover from…
I really like my IKEA symfonisk table lamp - nice combination of a Sonos speaker and a table lamp. What always angered me is that dust and dirt is falling into the open glass shade and starts collecting inside the lamp. Therefore I…
Alternative Upper Wing Pin for the WACO. I really did not understand why they did not include a pin with two holes for the upper wing joint. You can still glue in one side but having to use heat to drill a hole for the screw as shown in…
I have IKEA (Sonos) Symfonisk bookshelf speaker next to the sink and I needed to put towel somewhere around and I didn't want to drill a hole into the wall. Bookshelf speaker is way too wide and I couldn't make anything around the speaker…
I used Liquitex Professional Modeling Paste and a paint brush for the effect then spray painted it in black then applied clear spray.
There are two different templates, as there are two hole sizes. Use the large feet if planning to mount on the bottom side (when vertically mounted). Apollo MSR-2 shown mounted as example.
Low profile table top legs that replaces the original floor stand with compact stabilising legs, lifting the lamp just enough to clear the power cable and eliminate wobble. You'll need three, any brims etc. can be a pain to remove but…
I use HomeAssistant to automate my Ikea Symfonisk. I wanted to stow away the Ikea Rodret Zigbee switch somehow. So i designed this plate that clicks onto one of the Symfonisk Lamps legs. The Rodret plate can be glued onto it easily.
Mount for Apollo MSR-2 on Ikea Symfonisk. Use the same back from the original model.
Printing Used PLA with smooth PEI plate for better surface finish 0.2 mm layers 0.4 mm nozzle no supports Still searching for a filament with matching white tone Usage In my case it works fine, without screwing the baseplate to the wall,…
I´ve used my Symfonisk remote always without the holder, since ive used it on a magnetic plate. Now I decided to mount the remote under my desk and couldn´t find the holder anymore, so I decided to design my own replacement. Its mounted…
Convert studio monitors to SONOS speakers by hacking the IKEA symfonisk speaker. In the following article I will be giving a detailed build guide: https://www.funkyton.com/diy-sonos-connect-ikea-symfonisk-hack/ Category: Audio
Put your IKEA STYRBAR or SYMFONISK Remote in a corner. Remix of "Better Ikea Styrbar wall mount" by @pipsel_222257
This is a 3D-printed travel case designed to safely transport a subcutaneous injector for Remsima , and it also fits Zymfentra injectors . The case was designed specifically for travel , where protection, insulation, and ease of access…
This GE model comes with a guide at the top that causes the flap attached to the left door to close underneath the right door when the left door is closed, but the original guide doesn't fully close the flap against the right door,…
SYMFONISK Bookshelf Speaker Backplate / Stand Adapter With the phase-out of the SYMFONISK collaboration between Sonos and IKEA, I managed to grab a great deal on two of the bookshelf speakers. Unfortunately, IKEA seems to be sold out of…
Make use of the empty space in your Ikea Symfonisk Floor Lamp Stand This little shelf will sit inside the rods of the stand for your Ikea Symfonisk lamp. Its designed to hold small loads. If printed as is, it will hang a few centimeters…
Replacement hinge for Ikea Symfonisk wall brackets. The wall brackets themselves are excellentbut during disassembly the metal hinges broke off. Remove the old hinges and assemble the new hinges inside the wall bracket. I found it easier…
Spare Flywheel cover for repair percussion massager YUNMAI YMFG-B453.
Put your IKEA STYRBAR or SYMFONISK Remote in a corner. Remix of "Better Ikea Styrbar wall mount" by @pipsel_222257
Convert studio monitors to SONOS speakers by hacking the IKEA symfonisk speaker. In the following article I will be giving a detailed build guide: https://www.funkyton.com/diy-sonos-connect-ikea-symfonisk-hack/ Category: Audio
Printing Used PLA with smooth PEI plate for better surface finish 0.2 mm layers 0.4 mm nozzle no supports Still searching for a filament with matching white tone Usage In my case it works fine, without screwing the baseplate to the wall,…
Symfonisk bookshelf speaker wall mount at a 5 degree angle. Print on its side and use 2 x 4mm bolts and nuts for securing to the Symfonisk itself with standard mounting holes.
Replacement hinge for Ikea Symfonisk wall brackets. The wall brackets themselves are excellentbut during disassembly the metal hinges broke off. Remove the old hinges and assemble the new hinges inside the wall bracket. I found it easier…
Key features complete new, modern design and look for the IKEA Symfonisk speaker clear sound distribution 2 variants avaiable (with buttons / no buttons) front design can be changed with other printing plates (textured, carbon, silk, etc)…
