Counting matching models…
A friend approached me a while back with a problem. He's a professional photographer and often uses several remote flashes to light different parts of an architectural scene. The Yongnuo and Speedlite flashes he uses each come with a foot…
A set of magnetically mountable light shapers for Yongnuo YN685 flashes, consisting of a gel holder and a honeycomb/grid that reduces the light output angle to roughly 40°. The magnets used are widely-available 8x3mm neodymium ones (dia x…
Remix of a snooth for a Yongnuo 560. Turns the snoot into a diffuser. Print Settings Printer: Original Prusa MK2 Rafts: No Supports: No Resolution: 0.3 Infill: 20% How I Designed This TinkerCAD Category: Camera
Keep your lens safe and dust-free with this 3D printable lens case. The case is designed for a Yongnuo YN60mm F2 MF macro lens and has a threaded lid design. Size: 15.7 x 9.7 cm (assembled) Weight: 50 - 150 grams Print time: 10 - 15 hours…
One of the annoying things about the Yongnuo YN24-EX twin flash is when you are trying to photograph anything, the flash heads keep twisting around the mount adapter rings. In the past I jammed bits of paper in place to stop this, but…
With this piece of plastic you're able to use the affordable Yonguno Lens in professional environments. The gear ring just needs to be clippt on and you're ready to go. No more inconvenient to adjust and down slipping universal-gar rings.…
Simple holder + inserts to bring life into models eyes works as Bounce Card replacement tested with Godox TT685 II, TT600, Yongnuo 560 II, Neewer NW880 should work fine with Canon/Nikon or other strobes too if they have similar head, but…
My YN465 flash took a dive off a lightstand a few years ago and the battery door broke, I kind-of got it to stay in place and it worked until last week when it finally failed. So I designed this replacement door, this is a new design and…
I own two Yongnuo YN300 III lights, and both of them had this part broken. If you have one, it might already be cracked too, which puts extra stress on other parts. The replacement I made works surprisingly well, it fits perfectly and is…
I designed this macro diffuser for use with my Yongnuo 560 and Laowa 14mm. Sometimes using the LEDs on the end of the macro will wash out the subject, or I need more light to freeze motion. Adding a flash can helps fill in the light, and…
These parabolic reflectors allow for forward-facing beams. They are designed for the Mini-Bowern mount, which is used on LED light sources from Yongnuo and others. Several parabolic curvatures are available, as well as a protective cover…
These parabolic reflectors allow for forward-facing beams. They are designed for the Mini-Bowern mount, which is used on LED light sources from Yongnuo and others. Several parabolic curvatures are available, as well as a protective cover…
I designed this macro diffuser for use with my Yongnuo 560 and Laowa 14mm. Sometimes using the LEDs on the end of the macro will wash out the subject, or I need more light to freeze motion. Adding a flash can helps fill in the light, and…
I have 3 Yongnuo RF603-N triggers that were just lying around in a drawer. I made this holder to store them more neatly with a set of batteries (AAA) for each one. Thanks to Jprints for the hot shoe connector covers available at Godox…
A holder for 4 Yongnuo RF605 holders to keep them organised while stored. Thanks to Jprints for the hot shoe connector covers available at Godox X1T/XPRO cover for hot shoe mount contacts by Jprints
A diffuser for a Yongnuo YN600EX-RT flash. This model was created from scratch, but inspired by this mode: Yongnuo 560 Diffuser by user @DigChaos_633 . There are 2 variants: big and small (in case you want a bit better portability).…
We had some Yongnuo YN 360 RGB Light bars and needed a way to mount them on a wood shelf in the studio.
YOUNGNUO RF603C II Battery cover I had some concerns so I recreated the data. Support: Yes Filament: CC3D PLA MAX
This is belt/pocket clip for a Yongnuo RF-603ii Trigger. You will need a M4 x 20 socket head cap screw and a M4 nyloc nut. Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: No Resolution: .2mm Infill: 25% Filament:…
This is a tripod bracket to attach a Yongnuo RF-603ii remote trigger to one of the legs. It is designed to fit a tripod with 30mm diameter tubes. You will need a M3 x 25 socket head cap screw and an M3 nut. Print Settings Printer Brand:…
Made a ceiling mount for my YN 360 leds as lighting for a small photo studio Print Settings Rafts: No Supports: Yes Infill: 20% Category: Camera
This ia an alternative 6,35 mm (1/4") screw mount with a cable inlet for Yongnuo YN300 Air video lamp. I use YN300 Air as a powerful workbench lamp in combination with Roadworx Universal Ball Joint and Gravity MA XL gooseneck. I wanted to…
This is a cover cap for the remote on the YN 360 III video light. This makes it so you do not accidentally bump the settings on the remote while moving. I printed this in TPU to make it flexible. Printing in other materials will work but…
