Counting matching models…
Sycee or YuanBao was a type of ingot dating back to the Qin dynasty of ancient China. Today gold stylized sycee decorations are often used in Chinese New Year festivities. I now have 2 versions of this: 福 - Fortune 招財進寶 - In the form of a…
Otherwise known as the sycee, this is a Chinese currency that dates back to the Qin Dynasty (3rd Century BC) 1/28/2023 update: added YuanBao2 file with filleted inner ring… hope that makes for a prettier print 2/2/2023 update: added…
Two headed dinosaur monster Hyphalosaurus lingyuanensis reptile toy. 3D Scanned by Revopoint pop2 scanner
Slithering from the dark depths to terrorize your party of adventurers. Whether they are Yuan-ti, Chaos Snakemen, or some other kind of beast in your campaign you'll be able to flood the table with these creatures. nonPareil institute is…
Even more slithering from the dark depths to terrorize your party of adventurers. Whether they are Yuan-ti, Chaos Snakemen, or some other kind of beast in your campaign you'll be able to flood the table with these creatures. nonPareil…
Switch Dimensions Exterior 197.1 x 73 x 29 mm ( 7.76 X 2.87 x 1.14 inch ) distance between mounting holes: 129.5 mm ( 5.1 inch ) measured 43.5 mm from front measured 29.5 mm from rear Created YS25-0802 parameter set in my fork:…
This is my attempt at a Yuan-ti Barbarian. You might need to resize this to suit your RPG needs.
10-inch 1U rack mount version for YuanLey YS25-0801 ethernet switch. Printed the ears with long edge on build plate. Source: yuanley_YS25-0801
For mounting the YuanLey YS25-0801 (8x 2.5G, 1x 10G) network switch into a 19" rack (May be compatible with other brands because many are just re-brands of the same switch chassis) The MiddleCover is optional but it makes the mount a bit…
Wanted to incorporate another model in my setup. This time instead of modifying or modeling the rack mount shelf, an existing OpenSCAD library suitable to the purpose was used. Found https://github.com/wildegnux/universal-rack-shelf in…
This is my attempt at a Yuan-ti Fighter. You might need to resize this to suit your RPG needs.
This is my attempt at a Yuan-ti Druid. You might need to resize this to suit your RPG needs.
Module for switch Yuanley YS25-0402
This is my attempt at a Yuan-ti Wizard. You might need to resize this to suit your RPG needs.
This is my attempt at a Yuan-ti Cleric. You might need to resize this to suit your RPG needs.
This is my attempt at a Yuan-ti Rogue. You might need to resize this to suit your RPG needs.
This is my attempt at a Yuan-ti paladin You might need to resize this to suit your RPG needs.
This is my attempt at a Yuan-ti Warlock. You might need to resize this to suit your RPG needs.
Ancient blood carries ancient power. This Yuan-ti Sorcerer channels innate magic through a serpentine bloodline, combining an imposing reptilian appearance with the elaborate clothing and equipment of a powerful spellcaster. Scaled skin,…
This is my attempt at a Yuan-ti Ranger. You might need to resize this to suit your RPG needs.
This is my take on a Yuan-ti Monk. You might need to resize this for your RPG needs.
This is my attempt at a Yuan-ti Bard. You might need to resize this to suit your RPG needs.
This is my attempt at a Yuan-ti Gunslinger. You might need to resize this to suit your RPG needs.
This is a case for the Yuanley YS25 0801P (8-Port 2.5 gbe, 1 10gbe SFP-Port, PoE-Switch) but should also support the Davuaz Da-K9801WP as well (see here:…
beads for a string of chinese yuan coins Source for the last picture: https://de.pinterest.com/pin/313703930266337124/ I print mine with a Bambulab P1S and these settings: Layer height 0.2mm Wall thickness 1.6mm Wall line count 2…
Choose between the two versions based on your preferred surface finish: Version 1 provides smoother walls but a rougher top, while Version 2 offers better overall surface finish with a visible split line. Version 1 (One Piece) Layer…
This is my attempt at a Yuan-ti Artificer. You might need to resize this to suit your RPG needs.
Filament spools storage rack for Zhong Yuan Pegboard like this one 25 mm pipe (PVC, PP, etc.) is required. Pipe length for full width vertical rack (like on photo) is 384 mm. Vertical rack can fit 4 rows of spools (about 20 spools total).…
打印贴士：PLA或PETG都可以，拓竹2.0层厚的默认参数，变动内容：使用支撑，我在打印时设置了PETG作为PLA的支撑，使用AMS模块。（当然你也可以使用PLA作为PETG的支撑）设计时候没有给冗余，想法是可以把我的硬币卡进去，但发现有点过配合了，如果打印不好的话仅有一面可以卡硬币（对于变魔术来说足矣） Google Traslation： Printing tips: PLA or PETG are both acceptable, the default…
Yuanley YS25-0402P Wall Mount
Made this nut for my car as a replacement for the lost original one. It exactly replicates the factory part. It screws onto the stud, sits tightly and securely holds the fender liner. Already tested and working well. Simple and reliable…
A wall mount for the YuanLey YS25-1602 18 Port 2.5G Umanaged Ethernet Switch
Cat Yuanbao! A playful addition with a cat paw print on the back—Yuanbao stepped on by a cat feels even more lucky and auspicious. Follow my IG ▶ https://www.instagram.com/ningworks/
發布價格公告的好標誌（另見我的數字標誌）。 用 10% 填充的 PETG 印刷。 寬度 125 毫米（或 4 英寸） 高度 145 毫米（6 英寸） 深度 70 毫米（3 英寸）。 請喜歡並回复您的意見。 隨意捐贈，謝謝。 Nice sign to make a price announcement (also see my number signs). Printed in PETG with 10% infill. Width 125mm (or 4 inch)…
Power level 3 SFP modules like the WAS-110 consume ~3W and benefit from active cool around the heatsink. This shroud uses a 3010 axial or blower fan to move airflow above both cages. 3010 Blower Fan Duct BOM 1x: 3010 12V blower fan I'm…
Yuanley YS25-0402 is an inexpensive 4x 2.5G Base-T + 2x 10G SFP+ Ethernet Switch that tends to run hot when SFP+ 10G modules are used. This shroud directs air from a 40mm square x 10mm thick blower. I purchased a couple from Amazon to…
Dayuan Gridfinity Impact Socket Adaptor Holder Steel Adaptor Reducer 1/4 3/8 1/2 3/4 Inch Square Drive Female to Male DAYUAN 6pcs Impact Socket Adapter Set, Chrome Molybdenum Steel Adaptor Reducer 1/4 3/8 1/2 3/4 Inch Square Drive Female…
Total printing time:~4h33m Used filament:~47g 0.12mm layer height . Not colorized Inproved strenght by 2 walls,infill 100% you don't need to add support, the program did it by default.The support is easy to remove and requires no tools.…
Check out my other Halloween models if you like. Description: I created these cute pumpkin bottle opener in Blender. (This is not an AI model ! ) There are bottle openers for 6 different coins. Each available in 2 versions (single color…
Just adding 3 keystone jacks into into the extra space
After many months i have finally remastered this; it's now a full rackmount system! You do have to use screws to mount this together using M3x12 Screws and M3 Nuts that you can pull into the print. Print Settings Printer Brand: Creality…
You may need to change the scale to meet your needs. Made with DesktopHero3d then modified in Meshmixer. I am a neophyte to this so it wasn't a pretty merge. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: Yes…
Wanted to incorporate another model in my setup. This time instead of modifying or modeling the rack mount shelf, an existing OpenSCAD library suitable to the purpose was used. Found https://github.com/wildegnux/universal-rack-shelf in…
Total printing time:~4h33m Used filament:~47g 0.12mm layer height . Not colorized Inproved strenght by 2 walls,infill 100% you don't need to add support, the program did it by default.The support is easy to remove and requires no tools.…
Dayuan Gridfinity Impact Socket Adaptor Holder Steel Adaptor Reducer 1/4 3/8 1/2 3/4 Inch Square Drive Female to Male DAYUAN 6pcs Impact Socket Adapter Set, Chrome Molybdenum Steel Adaptor Reducer 1/4 3/8 1/2 3/4 Inch Square Drive Female…
This is my attempt at a Yuan-ti Gunslinger. You might need to resize this to suit your RPG needs.
This is my attempt at a Yuan-ti Ranger. You might need to resize this to suit your RPG needs.
This is my attempt at a Yuan-ti Warlock. You might need to resize this to suit your RPG needs.
This is my attempt at a Yuan-ti Wizard. You might need to resize this to suit your RPG needs.
This is my attempt at a Yuan-ti paladin You might need to resize this to suit your RPG needs.
This is my attempt at a Yuan-ti Fighter. You might need to resize this to suit your RPG needs.
This is my attempt at a Yuan-ti Druid. You might need to resize this to suit your RPG needs.
This is my attempt at a Yuan-ti Cleric. You might need to resize this to suit your RPG needs.
This is my attempt at a Yuan-ti Barbarian. You might need to resize this to suit your RPG needs.
This is my attempt at a Yuan-ti Rogue. You might need to resize this to suit your RPG needs.
This is my attempt at a Yuan-ti Artificer. You might need to resize this to suit your RPG needs.
This is my attempt at a Yuan-ti Bard. You might need to resize this to suit your RPG needs.
After many months i have finally remastered this; it's now a full rackmount system! You do have to use screws to mount this together using M3x12 Screws and M3 Nuts that you can pull into the print. Print Settings Printer Brand: Creality…
