64 models
Ein Scale Batterie Gehäuse für den Power Button eines Hobbywing Fusion. So könnt ihr den Schalter als Autobatterie tarnen. An einer Seite bleibt der Schalter entweder offen, oder ihr klemmt das Rückteile in die Öffnung wo das Kabel raus…
When I upgraded my TRX-4 ESC to a Hobbywing 1080, I found several mounting plates, but none had an external lever switch like I had been using with the original Traxxas ESC. I've combined Puredeath's excellent TRX switch(…
Scale battery for hiding your Hobbywing Fusion start button. You can hide it in plain sight. If you want. I printed the moving part with resinprinter and medium transparent resin. The button led still faintly shows. But if you dont mind…
Mount for the Hobbywing Max10 SCT within a Traxxas Rally/Slash with a LCG chassis. There's a cutout for the temp sensor as well as it's pretty close. You'll need one M3x8mm and M3x12mm for mounting. The ESC and switch should friction…
Why? I didn't like the usual adapters that mount the ESC to the floor of the central chassis, because you always have to angle it upwards. In hard crashes it wobbled around. Additionally I needed the space in the central chassis pit to…
This is a mount for a Hobbywing QuicRun 10BL120G2 ESC to be mounted in the stock ESC mounting holes for the Arrma Gorgon. Using the Stock mounting holes for the ESC this mount will allow the Hobbywing QuicRun 10BL120G2 to mount into the…
Hey. I made this V8 engine cover to hide my Fusion in the engine bay. Thats an V8 with Intercooler. Not that scale version of an real life engine. But i think it looks good. I printed with support. And used some wires for the plugs and…
ATTENTION: the switch holder V1 is designed to be used with hobbywing 3652 motor or similar size!! (max lenght 53mm!!) otherwise use V2 or V3 instead. a simple mount for the hobbywing ezrun esc. the sct/mt410 2.0 chassis offers a place to…
35mm replacement fan blade for Hobbywing Max6 and Arrma 35mm fans I made this a complete replacement vs a slide on design because I wanted the maximum amount of blade. A few millimeters matter when you need maximum cooling for something…
Remix of mounting plate to allow new Max6 G2 variant to fit XRT with no chassis mods when using a 90mm motor (eg. 5690). Fitment is tight when using a 5690, a 4990 should work with additional room due to the smaller diameter. When…
Nice and compact mount for the awesome HobbyWing WP 1080 ESC and power button to fix it in the Traxxas TRX-4. Will fit both the full version (with shift servo) and Sport models. Designed to reuse the screws and holes that hold the…
X-Maxx Hobbywing power switch mount Need: (2) M3 x 12 screws (4) M2.5 x 10 or (2) M3 x 10
Print with 5 perimeters and 100% infill for maximum strength
This is a super simple adapter plate that mimics the one that comes with the Hobbywing EZRUN WP SC8 ESC. The original plate allows the ESC to be mounted into a Traxxas car like a Slash, Rustler, etc. This plate serves exactly the same…
Skywing dragon mask based on the "Wings of Fire" book series. I based the mask off of the official book art and descriptions of the dragon species. The mask is scaled to fit an adult head, but feel free to adjust for your own comfort. The…
Flywing makes amazing RC model helicopters that utilize GPS and other forms of stabilization. In my case I purchased a FW450L V3. A battery tray is an inexpensive part, but it is necessary to hold a battery pack inside the model. One tray…
Building an RC vehicle, I needed somewhere to mount the Power Button for the Hobbywing QUICRUN WP 1080 Brushed Electronic Speed Controller on my vehicle. I found a spot along the body, and then designed a bracket/mount/holder-thingie to…
Quick ~40 minute print to get yourself a nice Hobbywing 1080 ESC and switch mount. Will fit Sport and Sport Kits models - without a 2-speed servo installed. Pictured installed on a Sport Kit.
Glue your key in this device and it will help you to unlock things easily.
A mounting solution for the Hobbywing Max10 SCT in a Traxxas Stampede 4x4 with the stock chassis. This design has 3 parts; a base plate, a step (to keep things level) and then a holder that keeps the ESC and switch in place. 2 x M3 6mm…
While installing the Hobbywing 16BL30 combo in my Typhon Grom, I couldn't figure out how to organize everything while still being able to lock the body in place. I run short CNBL 1500mAh packs so I don't need the entire length of the…
Print in any material you like. Fits the 12.5mm rotor. When reinstalling the rotor, first insert the tool into the can. Then gently insert the rotor, holding it firmly with pliers to prevent it from snapping too hard into the rear bearing.
To start the engines without having to disassamble
The goal was to keep the original placement of the receiver box and provides an addition 10mm clearance for the larger 4274 motor. BOM m3x20 2 m3x30 2 5x3mm foam m3 inserts 6 Print Support: Yes Material: PLA
Hey makers, I modeled a simple holder for ESC power switch. Suited for Hobbywing EzRun or QuicRun ESC. Maybe suitable for other ESC power switches. This design especially made for Duke Doks Cramer Truggy RC 4x4 but can be useful anywhere.…
I could only find 2 Max6 G2 mounts compatible with the X-Maxx and I wasn't happy with either. This ones compatible with both the original Max6 and Max6 G2. Mounting - 2 M3x8mm screws for mounting the Max6 G2 to the plate. Anything longer…
This holder allows for secure mounting of Hobbywing Max G2 series power switches in the same position as the stock Spektrum power switch. The switch is supposed to tightly pop into place but you could also use a dab of glue if it isn't…
I was tired of replacing the fan on this ESC so I made a guard that supports the fan and prevents it from breaking and flying out. I have been running this for the better part of a year and have not broken a fan since installing it. This…
Easy printable mount plate for the hobbywing max10 esc to fit the original holes of your rustler.
I printed with supports. Slide the switch into the holder, it is easier than to press it in. To remove slightly lift the end of the switch with pliers.
Simple holder to mount the Hobbywing XR10 in your RC vehicle. Hole distance chosen for Traxxas Stampede. Use M3 threaded inserts and M3 screws to mount the ESC in the holder. If you need to adapt you can also find the Fusion360 and STEP…
Goosky RS4 Venom “ Larger ESC Mounting Tray” The XT60 version needs to be warmed(with a heat gun) to push into the socket for the first time
So far I only found external switch for original Traxxas ESC. Current model accommodates the 1080 ESC and the power button. Also the button can be actioned by a lever protruding between chassis and sliders. Main difference is that lever…
I made this part to mount hobbywing quicrun 150A or hobbywing max8 You can print this detal from PETG or ABS It fits perfectly on AR320193 Use m3x6 (x4) and m3x12 (x2) screws
Tight and useful seat for switch ESC Hobbywing QuicRun 1080 (the best brushed ESC)
esc for mock up. no wires Category: R/C Vehicles
Thought I share some of my car and fan mounts for Hobbywing XeRun AXE ESC. It works with the v1 and R2 ESC's. I dont know all their names or versions. The ESC mount is made for SCX10 ii, but mount it anywhere you want. Hardware: M3x20mm…
This fan guard will fit over the 20mm X 20mm fan that comes with the Hobbywing XR10 Pro-Stock Spec ESCs, etc. ( HobbyWing HWI30860500 ) It will require M2.5 X 12mm screws, but it will protect the blades from being hit and also from having…
⚠ Important Note 3D prints are not always fully water‑tight . This enclosure has not been submersion‑tested . Use at your own risk . 🧰 Required Hardware 9× M2 × 14 mm screws 9× M2 nuts (standard, non‑locking) 2× M3 × 15 mm screws Antenna…
Goosky RS5 / RS6 ESC Fixing Plate (Hobbywing 150 V5.1 or Similar Model ) GT060047
Lüfterschutzgitter um das eindringen von Steinen zu verhindern. verwendet wurde ein Fliegengitter. Print Settings Printer Brand: Prusa Printer: I3 MK3S **Rafts:** No Supports: No **Infill:** 20 Filament: 3DJake PETG Category: R/C Vehicles
Use double sided tape to stick the FLYWING H1 GPS Unit to the top of the bracket. Two cable ties are inserted into the two holes securing the bracket to the tail boom. As an alternative to the double sided tape screw holes are provided…
Volantex Ranger 2000 Hobbywing Flyfun 40A ESC mount. ESC fixed by rubber ring from bicycle tube or nylon tie. See the pics and have a fun :) Print Settings Printer Brand: Prusa Printer: Prusa Clone **Supports:** Yes Infill: 60%…
After first building the 3dsets Mogster Overlander I decided to build the Bamboo model 12 as a second model. Since the recommendation for the Mogster was a Hobbywing motor I re-applied that advice on the Bamboo, only to find out that the…
I upgraded my previous version of button holder and added hole to tight install programming cable (Male-Female) for ESC Please don't forget to waterproof this cable before installation with silicone or something similar And use rubber cap…
This needs to be printed in something heat resistant like PETG or ABS, PLA will most likely deform due to heat from the ESC. Glue the fan cover on the upper casing with CA glue. Use the 4 standard small screws from the old case to fit the…
hey guys, installed a Hobbywing Ezrun Max8 into my Widemaxx. Enjoy
A 3D printable ESC mount for the XRT mini to interface with the holes in the chassis and the ESC it is a bit of a tight fit but screws in well and uses most of the stock hardware
HOBBYWING XRotor VTX mount for GEPRC LX5 Leopard 220mm frame.
Hobbywing 150 V5.1 or Similar Size Case
Transport box für die Robitronic Hobbywing programierkarte Dien box ist mit Magnet Deckel größe der Magneten 3x4mm
The right size to store original xteink lamp and my lamp holder for the flip cover,no stoppers,in my collection. To print in two colours pause the print, unload the filamenti, load the new One and resume ( if you do not have a multicolor…
To protect ESC fan against crashes. Fan size is 30x30x10To protect ESC fan against crashes. Fan size is 30x30x10
Here's a plate that you can secure to the bottom of your FreeWing FW450L with zip ties. Included is a mount for a Caddx walnut. Towards the rear you can mount flashing beacon lights. In the middle I plan on experimenting by adding a cargo…
Print it with high temp materials like ABS ASA PA or PC. Also fits 3652 G2 motors. Original design by Burak Ozcan
Ok so my power switch on my BLX185 went out, i thought i lost the ESC but turns out it was just the switch, I wired up a larger switch to test and the ESC was good. So checked for a replacement and I was not spending around 30$ for one,…
I could only find 2 Max6 G2 mounts compatible with the X-Maxx and I wasn't happy with either. This ones compatible with both the original Max6 and Max6 G2. Mounting - 2 M3x8mm screws for mounting the Max6 G2 to the plate. Anything longer…
After first building the 3dsets Mogster Overlander I decided to build the Bamboo model 12 as a second model. Since the recommendation for the Mogster was a Hobbywing motor I re-applied that advice on the Bamboo, only to find out that the…
Transport box für die Robitronic Hobbywing programierkarte Dien box ist mit Magnet Deckel größe der Magneten 3x4mm
While installing the Hobbywing 16BL30 combo in my Typhon Grom, I couldn't figure out how to organize everything while still being able to lock the body in place. I run short CNBL 1500mAh packs so I don't need the entire length of the…
This is the first Wings of Fire dragon I have made, a SkyWing. Has to print wings and body separately, and I recommend using Paint by layer height to avoid too many wing color changes. Wings take 45 grams and 1hr 30mins, and body takes 25…
The Incom Z28 Skywing is the most common starfighter within the Republic Defence Coalition during the High Republic Era. I was aiming for a 1:270 scale, but wasn't able to find any canon dimensions. I've assumed it to be about as big as…
