26 models
I pulled the STL into onshape and tried my best to replicate it, but that isn't always easy. It fits exactly the same as the original, except with better clearance near the jets (see the photo of the original's clearance). V1.2 update:…
DRZ400 mount for Trail Tech Vapor and OEM light bar. Uses factory mounting bracket and hardware. you will need a couple screws, washers, and nuts to mount the Vapor mount to the factory bracket. You'll also need to use your big brain to…
Print the top near where the skate bearings mount with a modifier and 100% infill. The first balancing stand is actually untested, the 2nd balancing stand is tested, but if you push it the wrong way, without a lot of infill, it affects…
You lost your HP workstation mounting screws? Just print 4 of these :D It's not perfect, but it works :)
I used Corwell CNC to have it cut out of carbon fiber sheet. It may work printed but it would have to be pretty thick.
Suzuki DRZ400 replacement Front Brake Hose Clamp. Model number 59243-03B01. I broke my clip after hitting a cow with my bike (no jokes). From the pieces I had left I designed this replacement clip. Print in PETG to allow enough…
Dust cover for the front shock absorber of the suzuki drz 400 s/e motorcycle. The cover is in two parts. Both parts are for the right motorcycle shock absorber. A left version can easily be created in the slicer using mirroring. Prachovka…
This is something I threw together so I could use aftermarket turn signals in the stock DRZ front turn signal mounts. The specific signals I use this for require an 8mm round hole for mounting. This should work with any other that…
Oil funnel made specifically for filling oil in a Drz400 with the handlebars being in the way
Use this to organize your valvetrain components when rebuilding a DRZ400, it may also fit other bikes. I am almost complete with this it requires a few minor changes (see picture). I am uploading with the hopes someone can change it for…
A custom bracket for the Trail Tech Vapor for a DRZ400 which includes a bracket for the original indicator housing. I designed the bracket so that the indicator housing is angled to suite the design of the Vapor. Two Version…
motorcycle grips for motorcycle suzuki desperado VZ400 and VZ800, quite comfortable, deliberately made them a little thicker than the original ones. Printed by ABS plastic Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No…
just a 3d scan of t he airbox for reverse engineering Category: Automotive
-youll need bolt a few millimeter shorter than oem… maximun 40mm long m6 x 1 -fit all years and fit 14T and 15T sprocket -print with no enclosure but with constant dryer/heater for the filament and creality glue for the build plate -print…
Had to 3d pring one for a larger sprocket while I wait for the larger one to come in the mail Metal one is better (obviously), however, in a pinch, this will do Category: Automotive
this can hold a veypor and two toggle switches. good for heated grips and heated seat switches you need some m6 nylock nuts and some m6 bolts, cant remember the size this fits right between the handle bar clamps on my drz400E. Category:…
This is designed specifically to fit the stock holes on the Queensland number plate and the stock rear reflector from the Australian DRZ400E (Not sure what other models have, they might have them as well). A simple strong little bracket.…
The cutout is to fit the original cable holder in place.
3d print, insert m6 nut, grind off nubs from broken OEM aluminum bit, instal & ride! Probably not safe to use these with an aftermarket rack. P.S. you should use the model with the step. It helps the plastics install a little easier…
Utilize OEM Hardware to delete passenger pegs and cover area!
The prior owner did a terrible job with the airbox mod. I ride off road and wanted more protection from water and dirt ingress. I'm adding Frogzskin hydrophobic mesh to the airbox opening. If you can get the wires out of the way there's a…
I wanted something better than blocks of wood to hold my engine up while I worked on it. This is what I wound up with. they're so high so you can put the crankshaft thru, install the flywheel, do all of that stuff and still flip the thing…
Adapter plate to convert DRZ400 from stock odometer/speedo to the Trailtech Vapor. Uses the stock speedo mount. Mount for stock indicator/high beam/temp lights. Requires 2 countersunk M6 25mm long screws to mount to the stock speedo…
Tired of small rodents sitting on the engine, eating there, and leaving nut shells and droppings? I'm trying these to keep rodents off the engine. I'll probably make one for the flat area of the swingarm too. Two colors in the photos…
Custom dash for my Suzuki DRZ400E to fit a Tail Tech Vapor Speedo, Ignition and the Indicator lights. Mounts to the factory mount for the original Speedo unit using 3 M6 Allen bolts. I bought a 3 Pin Sumitomo MT090 Sealed Connector from…
Tired of small rodents sitting on the engine, eating there, and leaving nut shells and droppings? I'm trying these to keep rodents off the engine. I'll probably make one for the flat area of the swingarm too. Two colors in the photos…
