Counting matching models…
Hi everyone. I share here my solution to provide some wind protection for the Kawasaki Z750S. As you may have already found out if you arrive here, getting handguards it's difficult, most of them don't fit properly. And if you are like me…
Support are required almost for one hole
This is the model with original sizes of damper of the fuel tank for Kawasaki Z750 year 2007 onward. The model must be printed with TPU with 20% of infill and 3 vertical layers and 4 horizontal. The model respects the original measures of…
You will need to glue it or use double sided tape
The plastic barrel for the brake light switch assembly of a 1978 Kawasaki KZ750 The original was snapped in half due to previous owner accident, I tried gluing/epoxy etc, but it wouldn't stay in one piece. So I designed this and lo and…
Print Settings Material: PLA works but you may wish to print this in a stronger material like ABS / ASA / CF-Nylon Layer Height: 0.2mm Infill: 20-50% There really isn't much infill in this model, but you want it to be strong Take care…
Print Settings: Material: CF-Nylon You want this to be capable of withstanding ambient heat radiating off the engine as it's relatively close when mounted Layer Height: 0.2mm Infill: 20-50% You want this to be strong to account for…
very basic, but functional output shaft seal driver for 1st gen z1000 and z750 engines.
Printed on a Voron 2.4, 0.6mm nozzle, 0.3 layer height, 2 walls and 30% cubic infill. Use 5mm brim on the funnel (second image) and 0.15mm layer height modifier on the nut threads (third image). Attach the nut to the clutch cover. The…
# Description This is a custom-designed handlebar phone mount bracket made specifically for the 2004–2006 Kawasaki Z750. It installs by being sandwiched between the handlebar clamp and the top mount, providing a strong, centered, and…
Y3000 Camera mount for Kawasaki Z750R (M10 Mirror hole) Category: Camera
