1 / 4
Handlebar Phone Mount Bracket (2004–2006 Kawasaki Z750, Quad Lock Compatible) — image 1
1 / 4

Handlebar Phone Mount Bracket (2004–2006 Kawasaki Z750, Quad Lock Compatible)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This is a custom-designed handlebar phone mount bracket made specifically for the 2004–2006 Kawasaki Z750.

Rating
0 / 5
Likes
0
Downloads
6
Makes
0
Views
88
Reviews
0

Updated at source:

Model information

Category
Automotive
License
Creative Commons — Attribution — Share Alike

# Description

This is a custom-designed handlebar phone mount bracket made specifically for the 2004–2006 Kawasaki Z750. It installs by being sandwiched between the handlebar clamp and the top mount, providing a strong, centered, and clean mounting solution without additional brackets.

> I've been using this for over a year, and it held up fine to speed, braking, weather etc although I do not take responsibility for this failing in any way due to variations in print settings and strength of particular materials - use at your own risk.

The top interface is compatible with Quad Lock-style mounting systems, including their anti-vibration module (requires a longer bolt).

For added peace of mind, the design includes a secondary retention slot for a zip tie (metal recommended), allowing you to secure the mount around the handlebar as a backup in high vibration conditions. When printed in the orientation as per the model, the bolt spreads the load across many layers.

## Features

- Designed specifically for 2004–2006 Kawasaki Z750

- Clean, integrated mount under the handlebar clamp

- Compatible with Quad Lock mounting system

- Supports anti-vibration module (longer bolt required)

- Integrated hex nut capture for a bolt to spread the load across many layers

- Built-in zip tie slot for additional safety retention (metal zipt-tie recommended)

## Hardware Required

1x M5 bolt (~30-35 mm length, tapered head)

1x M5 Hex nut (press-fit into base)

1x Metal zip tie (optional, for added security)

> Note: Bolt length may vary slightly depending on your setup and whether an anti-vibration module is used.

## Print Recommendations

### Material:

- PETG (tested, durable, slight flexibility)

- ABS (recommended for higher temperature resistance and long-term outdoor use)

### Settings:

- Layer height: 0.2 mm

- Infill: 40–60% (gyroid or grid)

- Walls: 4–5 perimeters

- Top/Bottom layers: 5+

- Nozzle: 0.4 mm or larger

### Orientation:

- Print flat with the base on the build plate (as shown in the front view)

### Supports:

- Required for central arch and underside overhangs

- Tree supports recommended for easy removal

### Tips:

- Use a brim for ABS to reduce warping

- Ensure strong layer adhesion (this is a structural part)

- Increase perimeters rather than infill for better strength

## Installation Notes

- Press-fit the hex nut into the bottom slot

- Position the bracket between the handlebar and clamp

- Install using the M5 bolt (use a longer one if adding anti-vibration module)

- Optionally add a metal zip tie through the slot and around the handlebar for backup retention

- Tighten securely, but do not overtighten

## Disclaimer

- This is an independent design and is not affiliated with or endorsed by Quad Lock.

- Fitment is intended only for the 2004–2006 Kawasaki Z750—compatibility with other models is not guaranteed.

- Use at your own risk—test thoroughly before riding and ensure all hardware is properly secured.

Tags