Handlebar Phone Mount Bracket (2004–2006 Kawasaki Z750, Quad Lock Compatible)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a custom-designed handlebar phone mount bracket made specifically for the 2004–2006 Kawasaki Z750.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 88
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Share Alike
# Description
This is a custom-designed handlebar phone mount bracket made specifically for the 2004–2006 Kawasaki Z750. It installs by being sandwiched between the handlebar clamp and the top mount, providing a strong, centered, and clean mounting solution without additional brackets.
> I've been using this for over a year, and it held up fine to speed, braking, weather etc although I do not take responsibility for this failing in any way due to variations in print settings and strength of particular materials - use at your own risk.
The top interface is compatible with Quad Lock-style mounting systems, including their anti-vibration module (requires a longer bolt).
For added peace of mind, the design includes a secondary retention slot for a zip tie (metal recommended), allowing you to secure the mount around the handlebar as a backup in high vibration conditions. When printed in the orientation as per the model, the bolt spreads the load across many layers.
## Features
- Designed specifically for 2004–2006 Kawasaki Z750
- Clean, integrated mount under the handlebar clamp
- Compatible with Quad Lock mounting system
- Supports anti-vibration module (longer bolt required)
- Integrated hex nut capture for a bolt to spread the load across many layers
- Built-in zip tie slot for additional safety retention (metal zipt-tie recommended)
## Hardware Required
1x M5 bolt (~30-35 mm length, tapered head)
1x M5 Hex nut (press-fit into base)
1x Metal zip tie (optional, for added security)
> Note: Bolt length may vary slightly depending on your setup and whether an anti-vibration module is used.
## Print Recommendations
### Material:
- PETG (tested, durable, slight flexibility)
- ABS (recommended for higher temperature resistance and long-term outdoor use)
### Settings:
- Layer height: 0.2 mm
- Infill: 40–60% (gyroid or grid)
- Walls: 4–5 perimeters
- Top/Bottom layers: 5+
- Nozzle: 0.4 mm or larger
### Orientation:
- Print flat with the base on the build plate (as shown in the front view)
### Supports:
- Required for central arch and underside overhangs
- Tree supports recommended for easy removal
### Tips:
- Use a brim for ABS to reduce warping
- Ensure strong layer adhesion (this is a structural part)
- Increase perimeters rather than infill for better strength
## Installation Notes
- Press-fit the hex nut into the bottom slot
- Position the bracket between the handlebar and clamp
- Install using the M5 bolt (use a longer one if adding anti-vibration module)
- Optionally add a metal zip tie through the slot and around the handlebar for backup retention
- Tighten securely, but do not overtighten
## Disclaimer
- This is an independent design and is not affiliated with or endorsed by Quad Lock.
- Fitment is intended only for the 2004–2006 Kawasaki Z750—compatibility with other models is not guaranteed.
- Use at your own risk—test thoroughly before riding and ensure all hardware is properly secured.