Counting matching models…
I have plenty of microscope parts mostly from 1970 era and they did not have any dust covers so I designed this cover to protect the tops. Another model is to protect bottoms here:…
Ablageschale für Zeiss 85mm f 4 mit Nikon Bajonett. Die Schale ist im Durchmesser um 1 bis 2 mm größer, damit sie noch mit Velour ausgekleidet werden kann. ……………………. Storage tray for Zeiss 85mm f 4 with Nikon bayonet. The tray is 1 to 2…
Ablageschale für Zeiss Biogon 21mm. Die Schale ist im Durchmesser um 1 bis 2 mm größer, damit sie noch mit Velour ausgekleidet werden kann. …………………….. Storage tray for Zeiss Biogon 21mm. The tray is 1 to 2 mm larger in diameter so that it…
What is this? This is a fully printable dispenser for zeiss lens wipes that can be mounted onto an IKEA SKADIS peg board. How does it work? As you pull out the bottom package, the rest above fall down into place. To refill, take off the…
Rear lens caps for Zeiss Ikon Contaflex for Pro-Tessar front lens parts. Fits all lenses with Pro-Tessar Bayonet I found none on the internet, so I made my own! There are 2 versions: with curved or sharpened inner top arc. -curved one:…
Es passen ca. 8 Doppelpackungen hinein. Oder auch "Zeiss Display-Reinigungstücvher".
GDR's Carl Zeiss Jena used a special non-standard thread of M19x0.75 for their infinite tubus length objectives. This adapter allows to use it in modern M27 threaded microscopes. Use PLA and a fine layer height of at least 0.1mm for…
Simple little holder for the Zeiss lens wipes I use to wipe down my print bed. Keeps them handy and organized on my bench.
Gegenlichtblende für Zeiss Jena Flektogon 50mm f4, Gewinde M 86x1. Zwei verschiedene Ausführungen, drei verschiedene Längen. Die konische kann ohne Supportmaterial gedruckt werden, die zylindrische benötigt Stützen. Den Teil mit dem…
tripod K&F concept adapter for lens Carl Zeiss Jena DDR Sonar 2.8/200 mm , for balanced position on tripod. holds on front side (87 mm) of the lens, adapter wide is 37 mm Print 0.4 mm nozzle without X/Y compensation. Additional Two 4 mm…
DESCRIPTION This adapter is intended for use with the trinocular head. The distance between the sensor of the camera and the top lens of the MF Projektiv is 125 mm. The height of the adapter is 30 mm and can be changed in the Fusion 360…
Rear cap for Carl Zeiss Lenses for the Hasselblad V-System. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: Doesn't Matter Supports: Yes Resolution: 0.2 Infill: 15% Filament: Prusament PETG Category: Camera
I kept picking up my AVP and getting finger prints all over my Zeiss Lens inserts by accident, so I decided to design removable covers to prevent this. The cover is interchangeable between the left and right lens, so print two of them to…
I created a Solar Filter for my old (but still great!) Zeiss Telementor Telescope. The part was printed with Prusament ASA, 0,2mm layer height and 25% Infill. Theres a small hole at the circumference that was meant to be used for a screw.…
I printed this on my Prusa Mini+ in PLA with supports everywhere using the 0.20mm STRUCTURAL preset with 20% infill.
0.2, 0.4 and 0.6mm shims for Contax Zeiss lenses. They are tested with Leitax adapters, but might work with others but not tested
I have plenty of microscope parts mostly from 1970 era and they did not have any dust covers so I designed this cover to protect the tops. Another model is to protect bottoms here:…
I have plenty of microscope parts mostly from 1970 era and they did not have any dust covers so I designed this cover to protect optics from the dust. Another model to protect top part is here:…
The winding knob for my Zeiss Ikon Nettar 517/16 fell off while shooting and I sketched this up with no reference to the old one. This one works fantastic and much better than the factory one (except this one is plastic and the factory…
Verschraubbare Dose für diese kleinen Filter welche am 30mm Zeiss F-Distagon für die Hasselblad rückseitig montiert werden. Gedruckt mit PLA ohne besondere Einstellungen. ……………………. Screw-on container for these small filters which are…
This is an adapter to mount your TLA140 and 21mm Viewfinder on your Contax G1 G2 not tested, might work too
https://www.facebook.com/solarastronomy.sk/posts/pfbid02UChmo7Kn5aebKzN6yFr7Lqps8LwheNVhBdjHqouLqvWqM8ifqkxXx6Pce5QfcoeZl
2x1 Gridfinity Lens Hood Holder for the Icarex 35 series Carl Zeiss Lenses. Print with bottom side on Print plate, no supports needed.
2x2 Gridfinity Lens Holder for the Icarex 35 series Carl Zeiss Lenses. The holder is designed for lenses using the Icarex Bayonet Mount. For a perfect fit use my Lens Rear Cap Model (shown in the pictures). Use it together with my Carl…
Rear cap for the icarex bayonet. Works on Icarex 35 Carl Zeiss lenses. Use it together with my Carl Zeiss Icarex Bayonet Lens Holder - Gridfinity . Print with bottom side on Print plate, some supports needed.
2x4 Gridfinity Zeiss Ikon Icarex 35 series Holder. Fits all 3 models, the Icarex 35, Icarex 35s and Icarex 35 cs (which is basically the 35, just with different optic). Fits with my Zeiss Ikon Icarex 35 camera series Body Cap ! Print with…
Zeiss Ikon Icarex 35 series Body Cap with Icarex Bayonet. Fits all 3 models, the Icarex 35, Icarex 35s and Icarex 35 cs (which is basically the 35, just with different optic). Use it together with my Zeiss Ikon Icarex 35 series Holder -…
I have this broken Yashica for sometime and now since I have access to 3D printer and Fusion 360 software I was able to successfully achieve this conversion. The focus helicoid is a simple M25 thread and it was inspired by the early leica…
Ablageschale für Zeiss 85mm f 4 mit Nikon Bajonett. Die Schale ist im Durchmesser um 1 bis 2 mm größer, damit sie noch mit Velour ausgekleidet werden kann. ……………………. Storage tray for Zeiss 85mm f 4 with Nikon bayonet. The tray is 1 to 2…
Ablageschale für Zeiss Biogon 21mm. Die Schale ist im Durchmesser um 1 bis 2 mm größer, damit sie noch mit Velour ausgekleidet werden kann. …………………….. Storage tray for Zeiss Biogon 21mm. The tray is 1 to 2 mm larger in diameter so that it…
This project contains four models: Lens Cap with “Zeiss Ikon” logo Lens Cap without “Zeiss Ikon” logo Lens Cap with “Zeiss Ikon” logo + string eyelet Lens Cap without “Zeiss Ikon” logo + string eyelet Bonus: Viewfinder cap The cap was…
Ablageschale für Zeiss Hasselblad 30mm Fischauge. Die Schale ist im Durchmesser um 1 bis 2 mm größer, damit sie noch mit Velour ausgekleidet werden kann. …………………. Storage tray for Zeiss Hasselblad 30mm fisheye. The tray is 1 to 2 mm…
Ablageschale für Zeiss Hasselblad 40mm Weitwinkel Objektiv. Die Schale ist im Durchmesser um 1 bis 2 mm größer, damit sie noch mit Velour ausgekleidet werden kann. ………………………….. Storage tray for Zeiss Hasselblad 40mm wide angle lens. The…
Ablageschale für Zeiss Hasselblad 60mm Weitwinkel Objektiv Distagon. Die Schale ist im Durchmesser um 1 bis 2 mm größer, damit sie noch mit Velour ausgekleidet werden kann. ………………………….. Storage tray for Zeiss Hasselblad 60mm wide angle…
Ablageschale für Zeiss Hasselblad 80mm Planar Objektiv. Die Schale ist im Durchmesser um 1 bis 2 mm größer, damit sie noch mit Velour ausgekleidet werden kann. ………………………….. Storage tray for Zeiss Hasselblad 80mm Planar lens. The tray is 1…
Ablageschale für Zeiss Hasselblad 120mm Makro-Planar Objektiv. Die Schale ist im Durchmesser um 1 bis 2 mm größer, damit sie noch mit Velour ausgekleidet werden kann. ………………………….. Storage tray for Zeiss Hasselblad 120mm Makro-Planar lens.…
Ablageschale für Zeiss Hasselblad 160mm Tessar Objektiv. Die Schale ist im Durchmesser um 1 bis 2 mm größer, damit sie noch mit Velour ausgekleidet werden kann. ………………………….. Storage tray for Zeiss Hasselblad 160mm Tessar lens. The tray is…
This is a custom-designed friction retainer intended to securely hold the eyepiece within the tube of a Zeiss Stemi 305 microscope. This retainer provides reliable bore friction, preventing unwanted movement or slipping of the eyepiece…
I tend to lose the protective caps - so I needed something cheap and visible. I printed those in bright orange PETG - it helps... =^_^= The outwards facing holes are a bit bigger - I managed to completely hide the knot of the rubber…
My second hand bought “Stemi Stand-M” came without the B/W plastik plate that covers the transmitted light microscopy hole. You can print it in one color, i switched in the middle layer to get the same white/black as the original. The…
Hate the Zeiss nub? Put this over it. Printed in PETG with supports. Use 3M VHB (very high bond) double sided tape. Has stuck on through multiple international trips. Redesigned it further to this version and had to really pry it off, so…
What is this? This is a fully printable dispenser for zeiss lens wipes that can be mounted onto an IKEA SKADIS peg board. How does it work? As you pull out the bottom package, the rest above fall down into place. To refill, take off the…
Camera lens cap for the Carl Zeiss Tessar 2,8/50 lens but it will probably work for similar lenses as well. Just make sure your lens has the two opposing semicircles (as seen in the picture of the lens without a cap) required to insert…
Zeiss LRP S3 4-25x50 Scope Parallax Wheel. Hardware required: (1) M3 x 5 mm button head screw.
This is a remake of the very fine spool made by bingusmegaballs on thingiverse. I've copied it as well as I could, added an extra slot and tooth for grabbing the film, and split it into two parts for easy printing. I adjusted the…
use as inspiration unless your ipd is around 59-60mm. add a pause to the print at 6mm and place the o-rings,
Dieses Modell habe ich für eine Carl Zeiss 27630 OP Lampe entworfen. Die Lampen haben original eine B20 Fassung. Glühbirnen für diese Fassungen sind jedoch nicht energieeffizient und schwer zu bekommen. Mit der Fassung können B22 Lampen…
A compact, tissue-box–style dispenser designed specifically for Zeiss lens wipes, built to mount on a 2×2 Gridfinity baseplate. This design keeps your wipes organized, easy to access, and neatly contained—no more loose packets scattered…
A very niche adapter for adapting Zeiss-Ikon Compur lenses with M30 0.5mm pitch to the more standard M42 with 1mm pitch
I have these lens wipes tucked into (seemingly) every cupboard, cubby, pocket, and bag that I own, annnd, some that I don't. The box they come in is pretty flimsy, and looks kinda tacky sitting out on a desk or table, so I built this one…
1 perimiter 10% infill (I used cubic) 95A Shore TPU from 3DJAKE Fits and holds it perfectly, simple model 40min print.
I printed mine from 40D flex filament. Happy printing & shooting!
Rear lens caps for Zeiss Ikon Contaflex for Pro-Tessar front lens parts. Fits all lenses with Pro-Tessar Bayonet I found none on the internet, so I made my own! There are 2 versions: with curved or sharpened inner top arc. -curved one:…
Es passen ca. 8 Doppelpackungen hinein. Oder auch "Zeiss Display-Reinigungstücvher".
GDR's Carl Zeiss Jena used a special non-standard thread of M19x0.75 for their infinite tubus length objectives. This adapter allows to use it in modern M27 threaded microscopes. Use PLA and a fine layer height of at least 0.1mm for…
Simple little holder for the Zeiss lens wipes I use to wipe down my print bed. Keeps them handy and organized on my bench.
Gegenlichtblende für Zeiss Jena Flektogon 50mm f4, Gewinde M 86x1. Zwei verschiedene Ausführungen, drei verschiedene Längen. Die konische kann ohne Supportmaterial gedruckt werden, die zylindrische benötigt Stützen. Den Teil mit dem…
tripod K&F concept adapter for lens Carl Zeiss Jena DDR Sonar 2.8/200 mm , for balanced position on tripod. holds on front side (87 mm) of the lens, adapter wide is 37 mm Print 0.4 mm nozzle without X/Y compensation. Additional Two 4 mm…
I wanted a better way of keeping my lens wipes at hand and since I have a skadis board above my computer it only made sense to make a container that would fit it. Supports required.
DESCRIPTION This adapter is intended for use with the trinocular head. The distance between the sensor of the camera and the top lens of the MF Projektiv is 125 mm. The height of the adapter is 30 mm and can be changed in the Fusion 360…
Fits Zeiss 35mm F2.8 ZM snuggly, no locking mechanism. Comes with hood cap, fits loosely but secure, you can scale it to your liking. Some minor testing was done and the hood doesn't seem to cause any noticeable vignetting. After shooting…
Ablageschale für das Zeiss Contax Topogon 25mm f4 Objektiv mit Contax Bajonett. Die Schale ist im Durchmesser um 1 bis 2 mm größer, damit sie noch mit Velour ausgekleidet werden kann und das gute Stück weich liegt.…
Objektivdeckel für das Zeiss Contax Topogon 25mm f4 in verschiedenen Ausführungen. Mit M55 x 0,75 Gewinde zum Schrauben mit oder ohne den Namen. Mit drei Schlitzen als Klemmdeckel mit oder ohne den Namen. Mit etwas Übermaß, damit man es…
PTU protector for the Zeiss viewfinder 28mm/25mm. No support needed. 5-10% infill
the OpenScan Benchy 3D Scanner comparison, see https://github.com/OpenScanEu/OpenScanBenchy/ We publish all the original files (send by the participants) as well as the aligned version shown in the final rendering. Feel free to reach out…
the OpenScan Benchy 3D Scanner comparison, see https://github.com/OpenScanEu/OpenScanBenchy/ We publish all the original files (send by the participants) as well as the aligned version shown in the final rendering. Feel free to reach out…
Ablageschale für das Zeiss Biogon 35mm f2 Objektiv mit Leica M Bajonett. Die Schale ist im Durchmesser um 1 bis 2 mm größer, damit sie noch mit Velour ausgekleidet werden kann. ................... Storage tray for the Zeiss Biogon 35mm f2…
Gegenlichtblende für das Zeiss Biogon 35mm f2 Objektiv mit M43 x 0,75 mm Gewinde. Einmal zylindrisch mit Löchern und einmal konisch ohne Löcher. Die zylindrische Ausführung benötigt Stützmaterial. Den Teil mit dem Gewinde mit möglichst…
Small adapter ring for fitting Microsoft Lifecam to an Carl Zeiss Jena microscope. Works like a charm! Category: DIY
Zeiss Victory 10x25 binoculars are of high quality and light weight. So they are easy to carry in the pocket as such but the well engineered carrying case are the only available lens protection and it adds a lot of space and weight around…
Fits Zeiss 160/- 10/0,25 finite objective (focal distance of 150mm, 0.8" diameter x 36tpi)
This lensboard can be used to convert the Ikonta 521/15 folding camera. You can srew in an 65mm threaded focus adapter. It has an Arca Swiss mount to secure the camera on a tripod and a mounting point for a hotshoe. When used with 120…
Simple holder for the Zeiss Lens wipes, holds 20 wipes Printed at .2 layer height 15% infill
Rear cap for Carl Zeiss Lenses for the Hasselblad V-System. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: Doesn't Matter Supports: Yes Resolution: 0.2 Infill: 15% Filament: Prusament PETG Category: Camera
Scope cover for Carl Zeiss JENA ZF4 Sunlu TPU is a great choice, but should work with any FLEX filament. For other diameters, just change the scale.
Just a little box with bottom ridges to keep the wipes held upright. Case is 207x104x57mm. The included .3mf has been cut to be printable on a Mini+. The included .stl is uncut and un-embossed.
Objective and eyepiece covers for the Zeiss Victory Pocket 8x25 binoculars. Print instructions Use PETG at the 0.10mm Detail setting, rotate 45º so the lines are parallel to the lens axis.
Protection Caps for Zeiss West 8x20 Binocular Note: -print with TPU 100% infill -There are two versions (oval and round)
If you use modern LED ring lights on a microscope there is the control unit. With this base plate you can mount the photonic LED controller on a Zeiss Microscope with cable ties. The connectors on the backside are supported too and also…
Front lens cover for Hasselblad Carl Zeiss Planar T* f2.8/80mm FE. I've included the following versions With logo: Can be printed with 0.40 mm nozzel otherwise the logo wont be printed correctly. A layer height of 0.15mm or lower is…
Light shield designed for a Zeiss AXIO with a WD=53 condenser having a 58mm barrel. Simplified construction compared to the similar Ti2 Light Shield which allows instantaneous installation and removal. Printing Print all parts with a 0.4…
Throw lever for ZEISS DURALYT scope. You need a M4x16 screew and un M4 bolt :) enjoy
A simple 2x1 gridfinity block that provides convenient access to lens wipes.
Die originalen scheinen häufig verloren zu gehen. Ich weiß nicht bei welchen Modellen das passt. Habe es nicht für mich konstruiert und gedruckt. Der Durchmesser Beträgt 25mm. Gedruckt aus ApolloX Für perfekte Rundheit sollte die STEP…
If you're missing the filter slider for your Zeiss Primo Star, then this is a simple way of adding dark-field capability to your microscope. Simply replace the dummy slider and insert color filter or a dark-field stop of suitable size.…
Remixed case to add print in place hinge. You still need the TPU inserts from the original design.
I kept picking up my AVP and getting finger prints all over my Zeiss Lens inserts by accident, so I decided to design removable covers to prevent this. The cover is interchangeable between the left and right lens, so print two of them to…
I present to you: the filter adapter for Zeiss Ikon SuperIkonta 530/2 bellow cameras. I wanted to fit my cokin A filter system onto my medium format SuperIkonta to make some sweet infrared shots so I designed this adapter. It fits this…
