Counting matching models…
Audio cassette box. (Obal na běžnou audiokazetu.) Print instructions =EN======== Audio cassette box. Like the original box. Used thicker walls for better coherence. If you want an original size, print 99% size. I think, nozzle 0.4 is…
Print approx. €2.73–€3.34 excl. taxPreliminary estimate for PETGSource material: PET
Zetor key chain
Print approx. €0.74–€0.90 excl. taxPreliminary estimate for one variant
This is a holder for the second nozzle that comes with the HAZET 2162M grease gun. If you, like me, don't know where to put it this comes in handy. The nozzle is secured by a tight fit that wraps around the thread by more than 180°.…
Print approx. €0.69–€0.84 excl. taxPreliminary estimate for PETGSource material: PET
Ližiny pro vany (kazety) ALMES / Rails for ALMES racks Doporučuji PETG nebo třeba NYLON. PLA je křehký materiál a zoubky se rády lámou. Pro PETG a jiné pevné materiály (ABS, ASA, …) je tu 95% model (zmenšen na 95% pouze v ose X). Tento…
Print approx. €3.77–€4.61 excl. taxPreliminary estimate for one variant
Držák na kazety / VHS
Print approx. €4.98–€6.08 excl. taxPreliminary estimate for one variant
Zetor kryt stěrače
Print approx. €2.89–€3.53 excl. taxPreliminary estimate for one variant
EN: The HAZET 810R bit or Inbus Flow 73424 bit ratched screwdrivers are some of the best screwdrivers with a silent and stepless ratchet. Nevertheless, I almost didn't buy the HAZET 810R because it doesn't have the very practical twirler…
Print approx. €0.81–€0.99 excl. taxPreliminary estimate for PETGSource material: PET
Adapter Przetwornicy lampy Dodge Durango Przejście z przetwornicy kwadratowej na przetwornicę okrągłą. Może komuś się przyda
Print approx. €2.04–€2.49 excl. taxPreliminary estimate for PETGSource material: PET
Opzetstukken voor de festool-stofzuiger, zo kom je ook in de kleinere kieren. Attachments for the Festool vacuum cleaner, so you can also reach into smaller cracks. Groeten Ludo
Print approx. €1.08–€1.32 excl. taxPreliminary estimate for one variant
Het gaat om een klein pinnetje van 5.5mm doormeter en 20mm lang. Stelt dus echt niets voor, maar mijn koffiezet werkt weer. Tijdens de afwas is het steun pinnetje afgebroken dat de koffiefilter op zijn plaats houd. Ik heb dan waar het…
Print approx. €0.13–€0.16 excl. taxPreliminary estimate for one variant
🔥 BlazeTooth : The Fiery Fusion of Toothless and Flames! 🔥 BlazeTooth is a unique 3D model that combines the spirit of Toothless with blazing flames. With fiery wings and a flexible body, this dragon is ready to join your collection.…
🟦 Zetor Crystal 8145 🟦 !!!Warning!!! Not suitable for small children. The model contains many small parts, risk of inhalation and suffocation. TIRE UPDATE - If you choose to print this update, don't print these parts black 15 by MrHanjak…
🔵 Zetor 50 Super 🔵 This tractor is designed to be beautifully assembled. 😇 ■ Video + ❗Tutorial❗ I recommend printing the turn signals, headlights and engine in two colors. ➔ Engine - my height setting is 8.90 ➔ Headlights - my height…
⚫ Zetor 7745 ⚫ 👉INFORMATION👈 I would like to announce that the Zetor 6341 will be the last tractor I will make in foreseeable future. At least for a year, I want to take a break from the tractors. Right now I want to focus on sci-fi or…
this is a remix: https://www.thingiverse.com/thing:2384216 The great design of pzonyga didn't really grab the tip for me because the thin arms deformed a little when they went together. So I made the tweezers a little more massive and…
⚫ Zetor 6341 ⚫ This is the last model for the year 2023. Expect a new models in 2024 Follow me on YouTube for more info about what you can look forward for. :-) Zetor 6341 is the last tractor I will make in foreseeable future. At least…
⚫ Zetor Crystal 8045 ⚫ !!!Warning!!! Not suitable for small children. The model contains many small parts, risk of inhalation and suffocation. TIRE UPDATE - If you choose to print this update, don't print these parts 26 black by MrHanjak…
⚫ Zetor 7711 ⚫ !!!Warning!!! Not suitable for small children. The model contains many small parts, risk of inhalation and suffocation. If you like my work, I will be very happy if you support me by giving me a follow and subscription on…
🟦 Zetor Crystal 8011 🟦 UPDATE https://www.printables.com/cs/model/446803-zetor-crystals-update-for-attaching-a-trailer-no-s From this day on, all my models will be in the better 3MF format Look forward to other similar models, I will be…
Introduction This model has been specially developed to take full advantage of the printing bed of most printers, which is approximately 200x200 or a little more. but it can also be used for anything else, with saving writing material,…
Universell einsetzbare Pinzette. Ohne Support schnell und einfach gedruckt. Länge ca. 140mm; Die Spitze hat ca. 3mm - also sehr präzise! Nicht vergessen: einzigartiges Design keine KI keine nachbearbeiteten Fotos, nur Originalbilder…
some easy-to-print, basic tweezers for optimum strength print with enough perimeters so it turns completely solid in case you need flat surfaces at the tip, you can fold a piece of sand paper so it's double sided and carefully pull that…
⚫ Tire and Wheels UPDATE ⚫ I don't like interfering with an already released model. Therefore, this update is standalone. If you choose to print this update, don't print these parts at zetor 8045/8145 Zetor 8045:…
⚫Zetor Crystal 8111⚫ Zetor crystal 8111 + new details update for all crystals !!! I guess no one expected it, not even me, but I decided to improve the crystals after so many years. What's new in the update? ▪ The sides where the door and…
⚫ Zetor 50 Super no cab version⚫ ➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖ Follow me on YouTube for more info about what you can look forward for. ■ YouTube ➔ https://www.youtube.com/c/MrHanjak2017 ■ Video 🔳 INFO 🔳 ■ Steel sheet ➔ PEI ■ Nozzle ➔ 0.4 ■ Layer height…
Aufbewahrung für Stifte und Post its. Perfekt geeignet für das Büro!
Ergonomic Tweezers - Pinzetta ergonomica Resize/Scale to adjust dimension If you download/enjoyed this file, please leave a like - Thx
material PLA
⚫ Zetor Crystals UPDATE ⚫ Green zetor 8011 is not and will not be available for download! This update will enable the attachment of a trailer, on Tractors Zetors Crystal where this option was not available.…
⚫ Zetor 50 Super ⚫ ➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖ Follow me on YouTube for more info about what you can look forward for. ■ YouTube ➔ https://www.youtube.com/c/MrHanjak2017 ■ Video Coming Soon! 🔳 INFO 🔳 ■ Steel sheet ➔ PEI ■ Nozzle ➔ 0.4 ■ Layer height…
If you’d like to say thank you, you can always buy me a coffee: buymeacoffee.com/the4n8 German: Gedruckt habe ich die Halterung mit meinem Vyper mit weißem PLA. Es werden keine Stützstrukturen/Supports benötigt. Du brauchst meine Mounts,…
Printed with PETG, 25% infill, and 3 perimeters
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Simple torque wrench holder for a hazet 5122-2 CT and others. The inner diameter is 23mm. The holder has a deepening on the back to make the wrench fit better and lies flat. I printed my holder with 4 perimeters and a little support on…
KeyChain: Jawa, čz, tatra, zetor, teamplate, Trabant, Tatra
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Halterung für eine Pinzette --> für das IKEA SKADIS Pegboard Ohne Stützen druckbar (auf dem Kopf) ----------------------------------------------------------------------------------- Follow Rhön Bastel: Instagram : claudio_gessner oder…
U dílů které je potřeba vídekrát je 2x/4x
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Nothing too complicated - just a box for loose stack of note papers. But it was useful practice task on modelling a hexonal grill in Inventor. Designed with inner space sized 90x90mm, can be easily scaled up or down for different papers.…
Universeller Werkzeughalter für Hazet Lochwand.
Rosette for pipe with a diameter of 16mm. I printed it with the visible part down without supports. I put the supports just under the pins for connection. Video: https://youtube.com/shorts/CA6v1yBhQjI?si=PzMssdViTufjmICR Thank you for…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
A universal holder for the Hazet perforated wall. The holder has five holes for M4 screws. The holes are 20 mm apart. The middle hole is centrally located. Holder for mounting https://www.printables.com/de/@Boogie/collections/1423434…
10.12.2021 úprava komponentov otoc_p a otoc_l aby sa kolesa mohli zo strany na stranu otáčať ľahšie 10.12.2021 doplnené súbory pre verziu mini
Dobrý den, Mám pro vás nekolik druhu pinzet. Zrovna tenhle model je spise na silove veci, ale samozdrejme i jemne, drobne veci v pohode unese. Tistene bez podpory!!! Pokud vás moje práce zaujala, odkazy jsou zde:…
These are machinist 1-2-3 blocks, but they have 1001 uses for all sorts of fixtures, jigs and now with threaded holes they can easily be connected together like a building set to make whatever you want. 3D printed 1-2-3 blocks are better…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
These are machinist 1-2-3 blocks, but they have 1001 uses for all sorts of fixtures, jigs and now with threaded holes they can easily be connected together like a building set to make whatever you want. 3D printed 1-2-3 blocks are better…
Dieser stilvolle Halter organisiert deine DIN A7 Karteikarten oder Notizzettel effizient und platzsparend. Ideal für den Schreibtisch. Einfach zu drucken und robust im Design, wird er zu einem unverzichtbaren Organisationshelfer in deinem…
The Zetor 25A, a classic tractor made to be printed in almost any scale with your own 3D-printer! Only requires one to print the parts with supports (recommended to print in multiple prints, not forced though), glue the “frontaxelmount”…
kleiner Notizzettel halter damit diese immer erreichbar sind um maße zu notieren
Malý model traktoru pro děti.Složen z dílů které do sebe pasují bez použití lepidla.Tisk tryskou 0,4 ,vrstva 0,16.Nakresleno v Fusion 360 kde jsou udány přesné rozměry,tisknuto na Kobra 3 kde každý tisk je jiný,většinou však díly pasovaly…
Eine Zettelbox in drei verschiedenen Größen (60 mm, 90 mm, 120 mm) für Zettelblöcke 90 x 90 mm. Print instructions Printed on Prusa i3 MK3S Layer height 0.20 mm Infill 15% No supports, no brim
You'll need some M5x16 hexagon head screws. The rest is printed. I used ASA for the small parts and PETG CF for the stop square
keine besonderen Druckeinstellungen nötig. Kann mit jedem Material gedruckt werden. Ich empfehle eine Schichthöhe von 0,2mm oder geringer (für schöne Oberfläche) Nahtposition habe ich “Hinten” gewählt. Optimal für die Küche ;-) Viel Spaß…
GENERAL This Zetor is a unique model for passionate Zetor fans, not only because it has many features such as movable arms, rotating wheels with a steering axle, and more. The Zetor also has an opening hood under which hides a beautiful…
a cover for fusebox on your Zetor tractor. if you print it with 0,2 nozzle the 540/min sign on top left will be there. printed out of pla, I personally recomend print it with PetG for more durability
Kolejna modyfikacja drukarki Ender3(i pro) - hamulec - przydatny, gdy nie lubimy jak nam oś X opada w czasie, gdy mamy wyłączone silniki osi Zet. Przeznaczenie i sposób użycia hamulca omówiony jest w filmie - Moje projekty (google.com)
Queste sono delle normali pinzette, per stamparle ci vogliono pochi minuti, e sono per questo così pratiche, sono piccole e le puoi trasportare anche in tasca
The internal dimensions of the mag box are 63.3 x 23.2 mm. Real steel AR15 magazines will not fit inside, just airsoft GBBR M4/AR15 mags. Printed this on Prusa Mini with PLA. Edit. Version 1 added with little improvements.
Rugged box for your precious Hazet tools. Should work with every toolset that comes in the 165-S box, like most ¼" toolsets like 853 and 854.
Hier eine kleine Pinzette die ich in Blender erstellt habe
A Zeta Metroid. You can support me on https://www.patreon.com/Schlossbauer if you like my work. Category: Toys & Games
řek bych , že je méně odpadu
Praktischer Organisator für den Schreibtisch
Here at System76 we love ourselves a good game of chess. So we thought what better way to connect our love of chess with our cute System76 zetabots. So Alex, one of our machinists, took it upon himself to put together this awesome chess…
Prostokątna kratka wentylacyjna z żebrowaniem kierunkowym (louver design). Przeznaczona do montażu w cokołach meblowych (np. pod lodówkę do zabudowy), drzwiach łazienkowych, szafach technicznych oraz obudowach grzejników. Kąt nachylenia…
Board game organizer for Conan (monolith) and the following sets and expansions. Also supports sleeved cards, I use mayday premiums (thicker ones). Kings Pledge Stretch goals/ Collectors Box Stygia Nordheim Khitai Conqueror & Tome of…
Drucker (Printer): Creality Ender 3 v2 Filament: Eryone Matte Aqua Blue Schichthöhe (Layerheight): 0.2 Temperatur (Temperature): 210 / 80 Gummifüße (Rubber feet): 8mm Ø / 2,5mm hoch
Notizzettel Box für 9cmx9cm Notizzettel Note box for 9cmx9cm notespapers
Notiz Zettel Kasten mit eingebautem Scharnier und Schnapp-Verschluss Maße: Siehe Bilder für DIN A8 52 X 74mm Achtung PrusaSlic3r: Die Achse als Part eines der anderen Bauteile importieren, und das andere Bauteil vor dem slicen händisch in…
Dobrý den, Mám pro vás nekolik druhu pinzet. Zrovna tenhle model je spise na silove veci, ale samozdrejme i jemne, drobne veci v pohode unese. Tistene bez podpory!!! Pokud vás moje práce zaujala, odkazy jsou zde:…
This design is for inspiration only (or static model). It is designed around components that are no longer sold. My brother and me owned a 1/10th scale RC buggy. After a few years and multiple crashes the body of the buggy was done and…
Wallmount for HAZET Torquetool / Wandhalterung für Drehmomentschlüssel Parametric design
Zettelkasten Der Zettelkasten nimmt lose Zettel bis zu einer Größe von 10x10cm auf. Höhe des Stapels max. 5cm. Stifthalter Platz für sieben Stifte bis zu einem Durchmesser von 9mm.
Radlice na sníh za RC Zetora v měřítku 1:10, připojení na zadek pomocí 3bodu.Dole je radlice opatřena gumovou stěrkou. Model je smyšlený. Snow plow for RC zetor 1:10 scale. Model is not real copy.
Stiftebox mit Zettelhalter | Pencil box with paper holder
This is a remix by Altay Özsoy on Thingiverse . Added another slot for a nut and air tool and another 2 holes for wall mounting. My Print Settings: Rafts: NO Supports: NO Nozzle: 0.6 Resolution: 0.28 Infill: 25% Walls: 3 Material: Esun…
This adapter just substitutes the original hose connection of the Lamello Zeta P2, so you can use the BOSCH click and clean hose. I printed it in ASA Prusament with 4 outer perimeters, 0.4mm nozzle, 0.2mm structural profile. Printing…
Maketa rampovače do originálního třetího bodu.
Eine Halterung und eine Schablone zur Erstellung von Listen. Damit kommt wieder Ordnung in den Haushalt: Egal, ob noch was zu erledigen oder eine Einkaufsliste. Mit der Schalbolne werden schnell und einfach gerade Striche gezogen und der…
Desenhei a peça e imprimi em petg. Já fazem mais de 4 anos que a peça esta lá e não quebrou até agora esta com 4 ou 5 paredes e infill alto impressa com o lado superior na mesa
27mm (1.06in) long 16mm (.63in) tall 11mm (.43in) wide. I recommend printing this standing up with brim and no support.
Simple wire brush holder for a Hazet 2131 wire brush and others. The inner diameter is 12mm. What you need: M2 T-Nut , M2 nuts and M2 12mm screws are needed for mounting. The holder uses the T-Nuts for Ikea Skadis Pegboards system from…
Mothership uses the finest alien technology and possesses both offensive and defensive capabilities. It is protected by shield technology and its main weapon is a powerful raygun cannon named the death ray (this device, when used on…
Kruhové redukční kroužky pro montáž přeních LED světel na Zetor
⚫Crystals UPDATES⚫ Side doors and mirrors they are compatible with all crystals. But the front axle is only for Crystal 8011. FULL upgrade - Zetor Crystal 8011 https://www.printables.com/model/252938-tractor-zetor-crystal-8011-no-supports…
Dobrý den, Mám pro vás nekolik druhu pinzet. Zrovna tenhle model je spise na silove veci, ale samozdrejme i jemne, drobne veci v pohode unese. Tistene bez podpory!!! Pokud vás moje práce zaujala, odkazy jsou zde:…
Rozeta dojitá topného tělesa. Tisk z PETG 1h30min. Bez podpor. Vrstva 0,2
