Counting matching models…
This Print-in-Place model of the famous Japanese offroader Suzuki Jimny is my second Print-in-Place vehicle with working suspension! The wheels spin too! The only thing you have to do after printing is to snip off a few tiny pillars that…
Next model in the kit car series, this time it's a Jimny kit. The car once again has all wheels fully suspended. Assembly video: here
Print Details Full truck with cargo: 239g Truck only: 167g Dimensions: 3.25x 5.75 when printed at 100% v2 (6/9/23) Hello! I went back and cleaned up the model a little bit. Here's what's new: Uploaded all of the individual parts The…
If you have any questions, complains, requests, or other comments, please let me know!
Suzuki brand keychain, with a simple and easy design for a quick impression and low material cost. There is a file prepared for basic printers that do not support color changes within the same layer (similar to my example with an Ender 3…
Nissan car brand keychain, with a simple and easy design for a quick impression and low material cost. For daily use, it's better to modify the keychain scale to 80% to make it more comfortable and less bulky.
Keychain created for my friends Suzuki Samurai. Single and dual Extrusion models. The height of the base plate is 2mm (for dual extrusion object arrangement). Print Settings Printer: Geeetech G2S Pro Rafts: No Supports: No Resolution: 0.2…
Nezuko Kamado Demon slayer Funko pop
Cup holder for a JB74 Suzuki Jimny. It mounts in front of the air vent on the drivers side (RHD model). Mounts with one M8x 25mm allen head bolt. Simply remove the stock cover “bolt" and screw in the real bolt. Printed upside down with…
_____________________________________________________________________________________________________________ ☀ If you want to sell prints of this model, as well as all of my models - future and past , become an Authorized Merchant member…
This was modeled off of a 1995 Suzuki Sidekick and should fit any vehicle with a similar dashboard center bezel. Some of the parts fit tightly and will need slight post processing. This was done to ensure everybody could print this even…
I made these on my Mini Prusa +. They take about 7 hours to make each. They are about 7" in diameter and 0.300" thick. The Yamaha sprocket will need supports for the name. I will be working on others and will be doing a clock one as well.…
Remix of Nezuko model with a base on the model to be able to print in two colors
Suzuki brand keychain, with a simple and easy design for a quick impression and low material cost.
Introduction Slightly modified from the EPO PV50 (as known in Japan) the PV50 Is a cult classic moped among the youth of Finland. Finland was the biggest importer of the PV50 when it was imported from 1981 up until 2002. Though it was…
There are three models here. Two of them are just emblems. The other one is a keychain. If you want to print these in two different colours as I did in this render, and you don't have dual extruders and need to do a filament change, keep…
Capture the powerful and iconic Demon Form of Nezuko Kamado with this 3D printable STL model. This dynamic figure is perfect for fans of Demon Slayer looking to add a fierce and recognizable character to their collection or displays.…
keychain for your needs. Cut Down if need be. 4mm base and 0.8 color change (0.2 layers = 4 layers) 44mm x 33mm 6mm Keyring hole
Hello, Bazukino, a toy soldier sculpture. Thanks for your download, enjoy the print!
Feel free to print these files for yourself or get them printed through specific services like 3Dhubs. Please don't support the illegitimate eBay/Facebok sellers that stole the design without attribution! If you use these files, I would…
I've created a V2 that has a better design and left and right sides. https://www.printables.com/model/451844-suzuki-jimny-cup-holder-v2 Cup holder for a JB74 Suzuki Jimny. It mounts in front of the air vent on the drivers side (RHD…
Recommended settings tested with Elegoo Neptune 4 Plus printer on PLA material and Orca Slicer: Hot bed first layer 65°C and following layers 60°C. Use 0,4 mm nozzle. Printing temperature 210°C. Infill patterns: Rectilinear. Top and…
The famous nezuko box in demonslayer. Upside is open. Use this for penbox. Suppors in slicer are needed. Have fun :) All the 3D models of NemoMK2・Cults (cults3d.com) I'm selling more 3D printable things, take a look :)
Simple but very nice print, just print and put Nezuko on the stand
This is a faithful reproduction of the Suzuka International Racing Course. Its dimensions are 20cm long, 10cm tall, 3mm thick and the track width is 5mm, but you can scale up or down any dimension to suit your needs. As it is a simple…
My daughter needed Nezuko's Bambu to finalize her cosplay for carnival, so I decided to make it for her in 3D ! Very easy to print, and the parts print separately to facilitate coloring ! The 100% size is more for an adult, I reduced the…
Use 1.75mm filament as a hinge between the parts.
Mittelkonsole für Suzuki Samurai sj413 mit supports gedruckt auf Ender 3 V3 Plus
Suzuki Hayabusa keychain, with a simple and easy design for a quick impression and low material cost.
Just glue the 2 sides together.
(CZ) Vylepšená verze tempomatu Fialový a oranžový díl se slepí acetonem. (EN) Improved cruise control version The purple and orange parts are glued together with acetone. Print instructions Rafts: No Supports: No Resolution: 0.2 Infill:…
Tapacubo para suzuki Jimny, diametro de sujeción: 108mm
Remember the following text: Inspiration from https://gravcut.com/collections/tout-poduits . I'm not the original creator of this look, but I am the one who converted it to be 3D printed! Enjoy! Category: 2D Art
This is a wide body Suzuki mini truck for display.
Message me if anything needs changing or write in comments
STL Files for cosplay Nezuko Kamada. Minimum Printer Volume Required: 150 mm x 150 mm x 150 mm Fusion 360 Link: https://myhub.autodesk360.com/ue2cc9c06/shares/public/SH56a43QTfd62c1cd96834708fce14d8b039 Category: Costume
This is my free original version of my Izuku Midoriya Mask, there is an updated paid version here for anyone who wants to support the work I've done: https://www.printables.com/model/1061217-izuku-midoriya-deku-mask This was my first ever…
Voilà un logo Suzuki à imprimer en 3d, pour décoration 6,75cm de long et 6,6cm de largeur, facile à imprimer
ceci est un modele 3D d'un buste du celebre manga My Hero Academia du personnage principale Izuku Midorya n'hesiter pas a liker et a le telecharger !!
Sencillo llavero Suzuki
Vit Budina makes wonderful print-in-place models of trucks and cars: https://www.printables.com/@VitBudina/models even more for money at https://cults3d.com/en/users/budinavit/3d-models Some of them are well-made replicas of real cars,…
copy of hubcap for suzuki vitara
This clip is a spare part for the Suzuki Swift. The original clip was a little bit loose and someday it fell down into the motor area. This happend a few times before, but this time I couldn't find it anymore :-( I designed it with…
Remix of Nezuko chibi model with a base on the model to be able to print in two colors
Tachometer holder Suzuki Bandit GSF 650 S -> Naked
Suzuka International Racing Course, Japan, on a stand with it's name. Race track 3x3 mm Stand 198x3x15 mm Gap for putting the track into the stand 0.1x0.1 mm bigger so it's easier to assemble. Looks best when separate parts printed in…
[ENG] A simple keyring with SUZUKI logo designed for three-colour printing in layers using a manual filament change (e.g. with the M600 command). It is also possible to have the name of the motorcycle inserted from the back. Therefore,…
This is a 3D model of a trash can made specifically for Suzuki Vitara 2015 onwards models. It perfectly fits into any of the two existing cupholders in the centre console. It has a hinge that connects with a piece of 1,75mm standard…
Place fenders on the body aligning their ends with the lower edge of the body. I used a bit a CA glue to hold it in place, then drilled wholes and added M2 bolts and nuts. I did not remove all the interior parts so in some places the nuts…
3mm layer height Print upright Brim 3 walls/perimeters
This bottle mount can be easily screwed into the existing threads with a metric pan head bolt. The bottle can conveniently be reached from the driver side. Use at your own risk, especially if you have passengers.
A simple model for the bamboo of Nezuko Kamado from Demon Slayer. My daughter is dressing up for Halloween and the one included with her costume was pretty bland. This has a cutout to make it comfortable and a hole to tie the red ribbon…
The plastic clips from my Suzuki Grand Vitara 2012 sun visor became brittle over time and started to crack so I designed this replacement to fit inside the metal wire as seen on the pictures. The model has a 2mm slot so you can easily…
Japan Suzuka You can build a racing circuit in Suzuka using roads from the Racing Circuits - building kit . Here is a list of the parts and how many you will need: A1LRC - 4× A2CLRC - 5× A2LRC - 8× A3CLRC - 4× A3LRC - 1× B0ICRC - 10×…
Printable brackets to store Suzuki Jimny 2019+ back seat headrests.
Print with TPU, 3 or more walls, 0.2mm layer
This is a Suzuki DL650 V-Strom blinker housing, that easily brakes when the bike falls :) Very big thanks for "remote" creating the modell to Barbér Máté . Print Settings Printer: prusai i3 rework 1.5 Rafts: No Supports: Yes Resolution:…
This model contains only the files that I modified from the separated part remix found here: https://www.printables.com/model/471565-every-part-separated-in-the-suzuki-carry-kei-truck/files For the full model, you will need to print…
Jimny Suzuki Type J1 - J4 - Key chain - Portachiavi - Porte Clès - 钥匙链 - Schlüsselanhänger Resize/scale to adjust dimensions All our designs are free to download and use. Your support fuels our creativity. If you downloaded and enjoyed…
Introducing a remixed Suzuki Swift Key Enclosure, innovatively redesigned to feature a clip fastening system for ease of access and future replacements. This model synergizes the practical design of Phillipnielsen's original Suzuki key…
These are parts I made myself in order to screw on the full fairings on the sv650s. The fairing hold really well eventhough I did not use the Frame Sliders. The Holder on the radiators have to be printed twice. You can choose between the…
The Suzuki DR350 dash fixer upperer! I've gotten mine printed in PLA at the moment for prototyping, but the ideal I this case would be a white PETG I think. You will also need 3x M5x30 cap head hex bolt and an accompanying nut. Print out…
SUZUKI Honeycomb style - Key chain - Portachiavi - Porte Clès - 钥匙链 - Schlüsselanhänger Resize to adjust dimension If you download/enjoyed this file, please leave a like - Thks All trademarks, logos and brand names are the property of…
no supports required had a little stringing around the pillars. It took 22hrs to print at .2 layer height with %15 infill
A remix of KTP's Isofix hook to suit the seat back anchors in an A2L/ZC33S Suzuki Swift (2018-2024). Given parts sharing between any given manufacturer's models it's quite possible this will also fit other Suzukis of the same era, but I…
I advice printing it in PETG or ABS. not sure how long PLA wil last or if it gets hot at all. hardware needed: 1x M6x1.0 40mm 3x M6x1.0 20mm 4x M6 nuts 9x M6 washers installation can be a bit tedious because you cant really acces the…
A simple oil spout to drain the oil from a Suzuki 250HP outboard engine. The original was made from rubber, but it seemed like it was for a slightly different model.
Compatible with the first gen suzuki sidekick and geo tracker. Only tested on my car. Mirror in slicer if you need the drivers side. Profile has been modified to be stronger than OEM. Make sure to consider your material and infill. The…
I made a simple snorkel grill with a logo for my car (suzuki jimny). Stick the logo with glue. Maybe someone will like it ;)
Curled rat, second half 19th C CE, by Suzuki Masanao, now in the collection of the Minneapolis Institute of Art. improved version of an older model I fixed up.
Suzuki - Type S1 - Keychain - Portachiavi - Porte Clès - 钥匙链 - Schlüsselanhänger Resize to adjust dimension If you download/enjoyed this file, please leave a like - Thx Category: Gadgets All trademarks, logos and brand names are the…
A motorcycle kick stand pad for your Suzuki. When you need to park on dirt, put this down and put your kickstand on it. This will keep your kickstand from sinking into the dirt and dumping your new GSXR in the dirt. Print this with plenty…
Based on an old design with slip in stacks in factory rubbers which saw a 3.5hp improvement on the dyno without tuning. Decided to improve it as multiple friends are now tracking these bikes so made a full boot replacement and improved…
I did not create this just felt it was a really good model worth sharing. Created by Sky_Lips on thingiverse
Gear knob replacement for manual Suzuki. This was designed for an Alto but will probably fit other models too. **Edit: I have now added a numbers ‘cap’ which clips over the top of the original shifter as a way to display the shift…
keyring logo of suzuki gsxr
Digital 3D model of Mahoutokoro Academy of Magic Wands (Whole/Parts) Classic . This model is a fan-made replica of the wand from Harry Potter. The files contain the whole wand + wand parts + connection screw in STL. This assembly system…
Suzuki Keychain w/ Logo only, hollow design Bicolor revommended
A new lamp from me, this time a SUZUKI lamp. As always with all new models from me, an additional USB-C port from AliExpress is needed:…
The basic idea was to be able to make different lower parts for different car models and also the possibility to make different cup models. But so far I've only made and printed for my Suzuki Vitara :-) The lower part is hollow so you can…
Air scoop for a Suzuki Samurai If you print it splitted, you need a 40x90x2mm plate to connect booth pieces.
Very easy to print suzuki sv650 mirror spacer for the people like me that can't see anything through the original ones except for your own shoulders. Just use some longer bolts and take the rubber from the original mirrors. happy riding!…
Simply Resized STL from the original to fit a Suzuki Splash 2014 (Probably fit swift as well)
A remix of GWA's well designed bracket to better fit the Pioneer TS-G1620F-2 6.5" speakers. This bracket is used to fit speakers in the rear of a 3-door JB74 Suzuki Jimny. Includes simple TPU gasket model.
Jimny manual storage under the cigarette is somewhat disappointing, it is very small and feels like an afterthought. That is why I designed this, to fit 3 purposes: Make a better use of that space To hold my phone. Android Auto works like…
Suzuki GS500 (E) Front Fender. Modeled this for my cafe racer-esque bike. Tested to work with a 1996 model. It is designed in a way where you do not need to remove any parts to install it. it uses the stock mounting holes. I used black…
![Suzuki mini pickup truck [wide body]](https://media.printables.com/media/prints/644505/images/5088033_5ed0382c-b96b-45f9-bd29-d58bc70f9b49_85a573c2-81dd-4c48-8507-8a1873cf3a91/screenshot-2023-11-11-223228.jpg)
