1 / 4
Onn Webcam (100028731) Sliding Lens Cover — zdjęcie 1
1 / 4

Onn Webcam (100028731) Sliding Lens Cover

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Sliding lens cap for Onn (Walmart) webcam.

Ocena
5 / 5
Polubienia
1
Pobrania
42
Wydruki
1
Wyświetlenia
116
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Office
Licencja
Creative Commons — Attribution

This is a lens cap/cover for the Onn (Walmart stock number 100028731) webcam. It's a three-piece design. One piece clips onto the housing of the camera and is self-retaining. At the front is a cover which creates an enclosed pocket for a sliding member. Two 2mm holes flank the center aperture for the camera: one for the microphone and one for the camera-on light indicator. The sliding member will cover the lens, but not the microphone of camera-on light indicator in one position, and the the other position will cover none of the three.

The front face plate and the base can be glued together, and in the model shown is glued with superglue on the two coincident faces. The thickness of the enclosed gap for the slider and the thickness of the slider is modeled as line-on-line, so that after printing you can lightly sand down the thickness of the slider to get the desired resistance you want when moving the slider.

Tagi