1 / 8
Toyota Tercel Glove Box Latch Button
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The plastic part of the glove box latch of a 5th gen Toyota Tercel
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 201
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
This was modeled based on an original Toyota Tercel 5th gen glove box latch.
Additional parts required:
- Metal spring
- The actual locking mechanism
Recommended printing settings (Based on OrcaSlicer):
- Infill: 100%
- Wall loops: 3
- Supports: On
Recommended Materials (Anything Heat Resistant):
- ABS, ASA, PETG, etc.
Tolerances are really tight. You will need a precise printer and a quality filament. In the contrary just sand down the parts until they glide nicely. In the featured pictures I was using neither; so I had to sand them. In addition, they were printed in ASA and I vapor smooth them with acetone.