1 / 8
Toyota Tercel Glove Box Latch Button
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The plastic part of the glove box latch of a 5th gen Toyota Tercel
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 24
- Makes
- 0
- Views
- 203
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial
This was modeled based on an original Toyota Tercel 5th gen glove box latch.
Additional parts required:
- Metal spring
- The actual locking mechanism
Recommended printing settings (Based on OrcaSlicer):
- Infill: 100%
- Wall loops: 3
- Supports: On
Recommended Materials (Anything Heat Resistant):
- ABS, ASA, PETG, etc.
Tolerances are really tight. You will need a precise printer and a quality filament. In the contrary just sand down the parts until they glide nicely. In the featured pictures I was using neither; so I had to sand them. In addition, they were printed in ASA and I vapor smooth them with acetone.