Pallet Pipe Rack
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I had some small bits of pipe available (20mm diam) and decided to design a pallet rack for my RC Hobby Model Trucks
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 28
- Wydruki
- 0
- Wyświetlenia
- 156
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The design was inspired by ONEBITPIXEL (https://cults3d.com/en/users/onebitpixel) and the barrel pallet rack.
This design is principally in line with a standard Euro Pallet size but reduced in width to suit the bits of pipe I have available (length wise) The design was created with Autodesk Fusion.
There are 3 variants
A flat bottom rack, 72 x 45 x9mm
A bottom rack with feet, suitable for a fork lift 72 x 45 x 13mm
An intermediate rack for vertical stacking of the pipes. 72 x 45 x 15mm
When loaded the racks could be held together with suitable straps of wrapping.
I printed using a wood filament to attempt to look like "real" timber pallets, sort of ok, dependent on the filament I guess.
3D printing settings
Printed on an Ender 3 S1 Pro using E-Sun Wood filament, using generic PLA settings, nozz 200C, bed 60C