Traxxas VXL-3s ESC adapter to Rustler with mechanical ESC
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Traxxas VXL-3s ESC adapter to Rustler with mechanical ESC.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 47
- Wydruki
- 0
- Wyświetlenia
- 434
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution
Traxxas VXL-3s ESC adapter to Rustler with mechanical ESC.
I have a few old Traxxas trucks laying around with the mechanical speed controllers. I wanted to update these to the VXL-3s system. I do not like using double-sided tape and the ESC does not fit in the side trays.
The model is thick enough to raise the ESC where the capacitors sit above where the rear bulkhead attaches to the chassis.
You really don't need the rear 4 holes where the original servo mounted, though if you really want to secure this, you can install them. The holes for the VXL-3s ESC to mount are sized to accept M3 screws. I used M3x20mm with washers between the fastener and ESC.
I printed these in raw PA (nylon). Rectangular modifiers were added to each side of the model where the holes are. The modifiers were used to make the infill 100%. The rest of the model was printed at 25%. Walls are 4 all around.
Feel free to modify this model as you see fit.
