Magnetic Holder for Expo Dry-Erase Eraser (for fridge, whiteboard, etc)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple holder for an Expo dry-erase eraser. Uses two embedded magnets (6x3mm or 8x3mm).
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 43
- Wydruki
- 0
- Wyświetlenia
- 250
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- GNU General Public License v3.0
A simple magnetic holder for an Expo dry-erase eraser, perfect for sticking to a fridge or whiteboard. Requires two neodymium disc magnets, either 6x3mm or 8x3mm.
This design uses embedded magnets. To set this up, in your slicer, insert a pause or color change right at the layer where the cavities for the magnets are covered (layer 180, if you're using a 0.2mm layer height). When your printer pauses, insert the magnets, ensure they're seated as far down as they will go, and then continue the print.
I'd recommend a low infill percentage (5-15%). Any material should work; I used black Overture PLA.