Magnetic Holder for Expo Dry-Erase Eraser (for fridge, whiteboard, etc)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple holder for an Expo dry-erase eraser. Uses two embedded magnets (6x3mm or 8x3mm).
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 43
- Makes
- 0
- Views
- 250
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- GNU General Public License v3.0
A simple magnetic holder for an Expo dry-erase eraser, perfect for sticking to a fridge or whiteboard. Requires two neodymium disc magnets, either 6x3mm or 8x3mm.
This design uses embedded magnets. To set this up, in your slicer, insert a pause or color change right at the layer where the cavities for the magnets are covered (layer 180, if you're using a 0.2mm layer height). When your printer pauses, insert the magnets, ensure they're seated as far down as they will go, and then continue the print.
I'd recommend a low infill percentage (5-15%). Any material should work; I used black Overture PLA.